ma.jomaa
01-25-2018, 06:17 PM
Up for sale is my 1987 e28 with an LS1 swap with working AC and heat. All work was done at JMP AutoWerkz in Reseda.
The list of work done/parts involved is not all inclusive as I will not remember every nut and bolt used to complete the build.
Used Parts:
-LS1 with around 80K miles. Engine was resealed and a new water pump was installed
-Rebuilt T56 transmission
-LS6 intake manifold
-Resealed 4.10 LSD
-Euro Bumpers
-Euro Headlights
-Euro Turn Signals
New Parts:
-GTO Oil Pan
-Pro 5.0 Short Shifter
-Aeromotive Adjustable Fuel pressure regulator
-New high pressure fuel pump
-Chromoly pushrods
-CSF Radiator
-16'' Spal fan
-Water Pump
-AC Compressor
-AC Lines, AC Condenser and Drier
-Heater Blower Motor
-Condenser Fan
-Diamond Stage II Clutch
-Spark Plugs and Wires
-Porsche 944 Brake Booster
-e32 brake Master Cylinder
-e34 M5 Brakes all around: New calipers, Rotors and Pads
-Custom one piece driveshaft
-Federal RSRR tires in 235/45/17 (Less than 500 miles on them)
-New euro bumpers rubber trim.
-VDO Oil Pressure gauge
-VDO Temperature gauge
-Innovate Motorsport Wideband AFR gauge
-Custom headers to clear steering box
-Engine and transmission mounts
-Tie Rods
-Upper and lower control arms
-Idler arm
-Steering Center link
-Sway bar links Front and Rear
-Rear Pitman Arms
-MAP Sensor
-IAT Sensor
-AC and Drive Belts
-Expansion Tank
-QTP electric Exhaust Cut out
-Custom 3'' exhaust,with mid section muffler, high flow cat, and rear magnaflow muffler.
-Euro Bumper brackets
-Brand new Fortune Auto 500 series coilovers still in the box, will be installed and car will be corner balanced and aligned if asking price is met.
Dyno tuned at New Era Performance LLC in Agoura hills, it made 303hp and 330ft/lb TQ at the wheels.
Asking price is $18,950 Please don't waste my time or yours with low ball offers, you will not be able to replicate this car for the asking price.
Willing to consider partial Trade+Cash, no project cars/not running cars has to be daily driver.
I can be reached at 818-703-2097 Call or text
The dent on driver side fender has already been fixed
Below is a link to google album of the car. For some Reason the only way I've been able to get the link to work is if you copy and paste it into the browser, clicking it is leading to nowhere.
https://photos.app.goo.gl/AAJ107CDzz1SCzmh1
http://i65.tinypic.com/5v9i8j.jpg
http://i67.tinypic.com/2u6llwo.jpg
http://i65.tinypic.com/t4vkuu.jpg
The list of work done/parts involved is not all inclusive as I will not remember every nut and bolt used to complete the build.
Used Parts:
-LS1 with around 80K miles. Engine was resealed and a new water pump was installed
-Rebuilt T56 transmission
-LS6 intake manifold
-Resealed 4.10 LSD
-Euro Bumpers
-Euro Headlights
-Euro Turn Signals
New Parts:
-GTO Oil Pan
-Pro 5.0 Short Shifter
-Aeromotive Adjustable Fuel pressure regulator
-New high pressure fuel pump
-Chromoly pushrods
-CSF Radiator
-16'' Spal fan
-Water Pump
-AC Compressor
-AC Lines, AC Condenser and Drier
-Heater Blower Motor
-Condenser Fan
-Diamond Stage II Clutch
-Spark Plugs and Wires
-Porsche 944 Brake Booster
-e32 brake Master Cylinder
-e34 M5 Brakes all around: New calipers, Rotors and Pads
-Custom one piece driveshaft
-Federal RSRR tires in 235/45/17 (Less than 500 miles on them)
-New euro bumpers rubber trim.
-VDO Oil Pressure gauge
-VDO Temperature gauge
-Innovate Motorsport Wideband AFR gauge
-Custom headers to clear steering box
-Engine and transmission mounts
-Tie Rods
-Upper and lower control arms
-Idler arm
-Steering Center link
-Sway bar links Front and Rear
-Rear Pitman Arms
-MAP Sensor
-IAT Sensor
-AC and Drive Belts
-Expansion Tank
-QTP electric Exhaust Cut out
-Custom 3'' exhaust,with mid section muffler, high flow cat, and rear magnaflow muffler.
-Euro Bumper brackets
-Brand new Fortune Auto 500 series coilovers still in the box, will be installed and car will be corner balanced and aligned if asking price is met.
Dyno tuned at New Era Performance LLC in Agoura hills, it made 303hp and 330ft/lb TQ at the wheels.
Asking price is $18,950 Please don't waste my time or yours with low ball offers, you will not be able to replicate this car for the asking price.
Willing to consider partial Trade+Cash, no project cars/not running cars has to be daily driver.
I can be reached at 818-703-2097 Call or text
The dent on driver side fender has already been fixed
Below is a link to google album of the car. For some Reason the only way I've been able to get the link to work is if you copy and paste it into the browser, clicking it is leading to nowhere.
https://photos.app.goo.gl/AAJ107CDzz1SCzmh1
http://i65.tinypic.com/5v9i8j.jpg
http://i67.tinypic.com/2u6llwo.jpg
http://i65.tinypic.com/t4vkuu.jpg