Project z31 Z432 N/A RB swap [Archive] - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RVAE34

12-20-2018, 06:29 PM

Thank you!!

I cleaned up the interior, removed all window and spoiler stickers, removed the window tint, used acetone to remove the spray tint from the tail light upper and lower sections and raised the car up about 1.5".

The last two pics are the new ride height but prior to removing the tail light and window tint.

https://c1.staticflickr.com/5/4878/32528309548_f4494f24ff_b.jpg

https://c1.staticflickr.com/5/4863/46349554982_134036e1fc_b.jpg

https://c1.staticflickr.com/5/4828/45676979434_86540374b2_b.jpg

https://c1.staticflickr.com/5/4828/46399025681_d72ab7be49_b.jpg

https://c1.staticflickr.com/5/4874/45675517984_8f8409fb94_b.jpg

MyBrokens13

12-20-2018, 06:39 PM

I read all the way through this a week ago, sub'd, and I will definitely be continuing to check back in. Love it! [emoji1690]

Sent from my SM-G955U using Tapatalk

RVAE34

12-21-2018, 08:12 PM

I found this which is my inspiration for the ultimate R31. Minus the rear wing, livery and canards. I love the car otherwise.

Took some more pics and plan to get some with the DSLR tomorrow at cars and coffee. Pulled the rear wing off because for some reason it really bugs me even though 90% love it. I like it better with nothing or just want a small lip on the trunk which I hope to find. Cleaned up the engine bay a little as well.

https://c1.staticflickr.com/5/4886/45652477794_8345110054_b.jpg

https://c1.staticflickr.com/5/4814/31472119737_e53a6c643c_b.jpg

https://c1.staticflickr.com/5/4867/45499197655_c323b7e2f7_b.jpg

https://c1.staticflickr.com/5/4806/31472119187_32b8275548_b.jpg

https://c1.staticflickr.com/5/4886/45688480964_787cd4f7ac_b.jpg

https://c1.staticflickr.com/5/4828/45676979434_86540374b2_b.jpg

https://c1.staticflickr.com/5/4863/46349554982_134036e1fc_b.jpg

https://c1.staticflickr.com/5/4878/32528309548_f4494f24ff_b.jpg

https://c1.staticflickr.com/5/4833/31473097037_ee97c063f5_b.jpg

https://c1.staticflickr.com/5/4892/31473367607_c5084018af_b.jpg

https://c1.staticflickr.com/5/4825/45690327624_e35cf5a748_b.jpg

https://c1.staticflickr.com/5/4869/45690327634_3a0bb4a892_b.jpg

lunchmeat

12-21-2018, 09:33 PM

Too much 80s awesomeness in this thread.

Sent from my SM-G960U using Tapatalk

RVAE34

12-22-2018, 09:43 AM

https://c1.staticflickr.com/5/4917/32548192008_9c9a8a32c6_b.jpg

https://c1.staticflickr.com/5/4872/31480531337_194abc74f7_b.jpg

RVAE34

12-23-2018, 01:48 PM

Some more pics.

https://c1.staticflickr.com/5/4888/46436368191_0469314f08_b.jpg

https://c2.staticflickr.com/8/7912/32564273578_5f1bc601bc_b.jpg

https://c2.staticflickr.com/8/7808/46436367451_d4a7b958c1_b.jpg

https://c1.staticflickr.com/5/4909/46436367731_f726b0e1f3_b.jpg

https://c1.staticflickr.com/5/4822/46436369901_dfeb8a6a63_b.jpg

https://c2.staticflickr.com/8/7868/46385756392_a30fd8eb5a_b.jpg

https://c1.staticflickr.com/5/4844/46436369601_bb16bd822f_b.jpg

https://c2.staticflickr.com/8/7881/46385755852_5daa1dc669_b.jpg

https://c2.staticflickr.com/8/7836/46385754842_5302ea5a63_b.jpg

https://c2.staticflickr.com/8/7909/46436369061_d9b9fae4f6_b.jpg

https://c1.staticflickr.com/5/4905/46436368681_4fa68a4dcd_b.jpg

https://c1.staticflickr.com/5/4914/46385756792_a4b9615994_b.jpg

https://c2.staticflickr.com/8/7875/46385755432_99c83188ea_b.jpg

wacko2

12-24-2018, 07:04 PM

Sick build. Cool rear swap suspension

Wknd

12-25-2018, 05:21 AM

After discovering your E39 and E38 build threads I was always amazed by the sheer quality and attention to detail. Did not expect to see a thread in Zilvia from you, but glad I discovered this one because it's perfect. Can't wait for updates.

supersayianjim

12-25-2018, 05:05 PM

it's so boxy though, so I take it you are NOT a fan of the r33's. and since you mentioned welding the "seams"? I have a question about that..

supersayianjim

12-25-2018, 06:04 PM

check out this thread, what would YOU do next?

http://zilvia.net/f/showthread.php?p=6314031#post6314031

RVAE34

12-26-2018, 08:04 PM

Sick build. Cool rear swap suspension

Thanks! I can't wait to drive with it after having some good drive time in the R31. They share the same rear setup basically so I would have direct comparison once the Z31 is done.

After discovering your E39 and E38 build threads I was always amazed by the sheer quality and attention to detail. Did not expect to see a thread in Zilvia from you, but glad I discovered this one because it's perfect. Can't wait for updates.

Thank you!

it's so boxy though, so I take it you are NOT a fan of the r33's. and since you mentioned welding the "seams"? I have a question about that..

I am not a fan of the R33 but I do love the R32. The problem is that they are far too common now and I would only want a super nice GTR which would be very pricey. I think I was smart buying the R31 since they are far more rare and I am happy to have a GTS since the body is identical. I am already ordering up a number of replacement parts from Japan to really freshen the car up.

check out this thread, what would YOU do next?

http://zilvia.net/f/showthread.php?p=6314031#post6314031

Sorry, I wouldn't have a clue what to do there since I am not doing the metal fab/body work.

RVAE34

01-05-2019, 06:10 AM

A guy who has done some render work for me owed me one and is working on how I would want my dream R31 to look in case I decide to keep and build the car. I must admit even though I bought to flip eventually, I am loving and driving the car more and more each day. Such on obscure car but rich in Nissan history/heritage and the epitome of the 80's. The front end is simply intoxicating to me as well for some reason. It's just perfectly and aggressively designed IMO.

https://c1.staticflickr.com/5/4848/45698974955_4abb8e1bdc_b.jpg

RVAE34

01-05-2019, 04:30 PM

Sorry, I'm not sorry. Keeping this one!!!!

https://c2.staticflickr.com/8/7915/46563655142_47733aeab4_b.jpg

https://c1.staticflickr.com/5/4859/46563655122_b404946043_b.jpg

https://c2.staticflickr.com/8/7800/46563655112_d898575dd8_b.jpg

Reece

01-05-2019, 06:18 PM

That E38 killed me holy fuck

I love everything going on in this thread.

RVAE34

01-13-2019, 08:04 AM

Thank you!! I am actually selling the wheels off the E38 to buy my friend's RB25 for the R31.

The Z31 is finally getting back on track. Lifter shims have been ordered and are the final pieces for the head. The pistons are done and getting treated/coated. Those will be shipped next week too. Then this year long engine build will finally wrap up.

RVAE34

01-17-2019, 04:15 PM

Pistons, rings and wrist pins arrived along with the lifter shims. Last of the required parts for the engine!

I also stopped by the body shop just as they were starting to weld the seams.

https://c2.staticflickr.com/8/7884/45866411425_9cf0847f97_b.jpg

https://c2.staticflickr.com/8/7820/45866411595_3d07ffd28b_b.jpg

https://c1.staticflickr.com/5/4826/46056463674_5b0ced2b94_b.jpg

https://c1.staticflickr.com/5/4871/46056463304_509cf1633f_b.jpg

https://c2.staticflickr.com/8/7913/45866411115_f73a71e339_b.jpg

https://c2.staticflickr.com/8/7886/45866410475_21a30dc690_b.jpg

https://c2.staticflickr.com/8/7803/46056462834_387e16c857_b.jpg

https://c2.staticflickr.com/8/7804/45866410765_6ecd25d63f_b.jpg

https://c1.staticflickr.com/5/4818/46056462674_fd18c4dee6_b.jpg

https://c1.staticflickr.com/5/4811/46728837252_1a0f87d218_b.jpg

https://c1.staticflickr.com/5/4812/46728837622_58ceca44f8_b.jpg

https://c2.staticflickr.com/8/7887/32905784928_86c38c905a_b.jpg

https://c2.staticflickr.com/8/7840/46728837822_5b894c5d04_b.jpg

https://c1.staticflickr.com/5/4881/32905785098_b9dac6d813_b.jpg

https://c1.staticflickr.com/5/4884/32905785598_25a84489df_b.jpg

https://c2.staticflickr.com/8/7831/46728837392_7baa26d35a_b.jpg

https://c2.staticflickr.com/8/7909/46728837102_fcca740a9b_b.jpg

jumpman2334

01-17-2019, 05:29 PM

https://i.ibb.co/WgKwX84/AAAAAAAA.jpg

RVAE34

01-18-2019, 05:48 AM

lol!!:keke:

TheRealSy90

01-18-2019, 07:44 AM

Those pistons are hot fire.

RVAE34

01-25-2019, 02:54 PM

Dropped off the last of the parts with the machinist! And stopped by Japan Parts Service to get some pics with Fatmankev's 4 door R31.

https://c2.staticflickr.com/8/7875/46150591824_f96a56cb97_b.jpg

https://c1.staticflickr.com/5/4906/46150591584_f0f5d70e31_b.jpg

https://c2.staticflickr.com/8/7850/39910596303_3759bf7569_b.jpg

https://c1.staticflickr.com/5/4819/39910596193_83836ce6f4_b.jpg

RVAE34

01-30-2019, 05:47 PM

Some welding updates on the Z. Btw, my BMW E38 M7 is going to be on bringatrailer soon.

https://c2.staticflickr.com/8/7901/46006854025_a1316fe8fd_b.jpg

https://c1.staticflickr.com/5/4821/46006853955_812b056b46_b.jpg

https://c1.staticflickr.com/5/4807/46921302121_d2b542a2d0_b.jpg

RVAE34

02-03-2019, 07:23 AM

Engine bay should be wrapped up this week and I cannot wait to post final pics. Paint not long after that.

My BMW E38 M7 is going up on bringatrailer soon and I will post a link when it's live. Ready to move on after 2 years. Actually looking for another classic skyline for the stable. DR30 iron mask kouki RS turbo red/black. The end goal is beast HR31, stock'ish DR30 and the N/A RB Z31. Best of all worlds.

Stock steering wheel back in and replaced the trim below the tail lights. Better paint and sticker/logo. Gave her a bath too. I have 2 of those worn switches but waiting until I find the rest because I only want to remove the dash panel once.

https://c1.staticflickr.com/5/4903/32031375947_b0c73058e4_b.jpg

https://c1.staticflickr.com/5/4869/46248132754_834dffe2df_b.jpg

https://c2.staticflickr.com/8/7853/40007840503_636f58509b_b.jpg

https://c1.staticflickr.com/5/4877/32031375857_499d1c902f_b.jpg

https://c2.staticflickr.com/8/7849/46058678905_08892ff03f_b.jpg

RVAE34

02-12-2019, 12:35 PM

Few updates on the Z31. Slow and steady.

Also for anyone interested, my BMW E38 is up on bringatrailer and ends in 2 days.

https://bringatrailer.com/listing/2001-bmw-740i-27/

https://c2.staticflickr.com/8/7920/47022753282_f4ffa7e81f_b.jpg

https://c2.staticflickr.com/8/7854/47022753252_c179f75d79_b.jpg

jumpman2334

02-12-2019, 01:50 PM

why is the add written in third person? does BAT have you submit info to them, and then they re-write it? weird.

RVAE34

02-12-2019, 02:35 PM

Yeah. I just give them the mod list and car details. I also tell them all the flaws.

RVAE34

02-14-2019, 06:03 AM

Head is done!!!! Block is bored and honed. He needs the dampener and flywheel for crank balancing. Dampener shipped this week and I just need to figure out which flywheel to order today.

RVAE34

02-18-2019, 07:02 AM

My R31 is for sale if anyone has interest.

https://www.ebay.com/itm/113647015155

Got the dampener and it's a beast. Comp flywheel/dual clutch shipped as well so the engine will be together soon!

https://c2.staticflickr.com/8/7821/46181483725_3d223d8f8d_b.jpg

https://c2.staticflickr.com/8/7828/40130389083_db50c01112_b.jpg

TheRealSy90

02-19-2019, 11:24 AM

I think I spent a half shift at work just reading comments on your BAT auction haha. Sorry it didn't meet your initial reserve price because it definitely deserved more. Stoked to see what you build next though.

RVAE34

02-19-2019, 03:27 PM

Haha! I think it may have broken a record with the number of comments.

I did get my reserve and made money on the car but I really thought it was going higer. But I am still happy and am replacing it with two cars. One of which will be finalized tomorrow morning and the other is being inspected in Japan over night and then purchased within 48 hours if it checks out.

TheRealSy90

02-20-2019, 01:39 PM

Enlarged throttle bodies (49mm) with new plates, bearings, seals, bore coating and freshly plated hardware.

https://c1.staticflickr.com/5/4781/38984970490_c4dbc23f5d_b.jpg

Do you remember what product was used for the throttle plate sealing? After doing some research i'm up to Molykote 321 as the prefered stuff to use? As far as the application it's unclear if you are supposed to let it Fully cure (24hrs+) before cracking the plates open, of if you open them when it is tacky and not fully cured. And man is that stuff expensive! Also not sure if brush on or aerosol is better.

RVAE34

02-21-2019, 11:43 AM

Here is one of two cars replacing the e38.

This thing is just so damn cool!

https://c2.staticflickr.com/8/7912/32218721287_cac5bca3c1_b.jpg

https://c2.staticflickr.com/8/7865/40195672433_c4dff83702_b.jpg

https://c2.staticflickr.com/8/7909/47160565941_ab4b6ff67a_b.jpg

https://c2.staticflickr.com/8/7918/47108511462_4ae3791713_b.jpg

https://c2.staticflickr.com/8/7877/32218716927_a1902c8187_b.jpg

https://c2.staticflickr.com/8/7923/32218716907_0e1c528d08_b.jpg

https://c2.staticflickr.com/8/7903/47108506792_d7b521e1ab_b.jpg

https://c2.staticflickr.com/8/7922/47112254051_e5e0df9b9a_o.jpg

https://c2.staticflickr.com/8/7846/47112254061_6810bb21c2_o.jpg

https://c2.staticflickr.com/8/7846/32170227737_e2eab269d5_o.jpg

jumpman2334

02-21-2019, 12:34 PM

christ that is gorgeous.

TheRealSy90

02-21-2019, 04:30 PM

I just want one of those center roof antenna's off of those skylines haha.

FJ20ET is an awesome engine. Basically an iron block sr20. Always wanted to build one of those but parts sourcing scares me.

EFITTZY

02-22-2019, 01:40 PM

Ohhh man is that thing cool! Enjoy seeing some FJ20 love :yum:

RVAE34

02-23-2019, 05:26 AM

Here is a teaser of the other car replacing the BMW.

https://c2.staticflickr.com/8/7919/40220564883_3a5d6324e1_b.jpg

Ka24Power

02-23-2019, 12:16 PM

E55 or CLS55? Either way.. looks like it makes some serious jam.

Corbic

02-23-2019, 05:16 PM

E55 or CLS55? Either way.. looks like it makes some serious jam.Not a E55 nor a G55

RVAE34

02-25-2019, 10:42 AM

06 e55 in designo mocha metallic with 2 tone interior

Corbic

02-25-2019, 10:48 AM

06 e55 in designo mocha metallic with 2 tone interiorMy condelences.

BryanS14

02-26-2019, 08:28 AM

06 e55 in designo mocha metallic with 2 tone interior

Finally a quality car. Im a huge MB nut. Have 3 and have owned over 20 of them. You will love the E55, just don't drive a Bi-Turbo MB, those are addicting.

RVAE34

02-26-2019, 08:35 AM

Corbic

02-26-2019, 09:21 AM

RVAE34

02-26-2019, 09:45 AM

That's why I have AAA and many several backup vehicles. That's the risk with anything made in Germany.

Corbic

02-26-2019, 10:58 AM

That's why I have AAA and many several backup vehicles. That's the risk with anything made in Germany.Likewise, but it still doesn't make it any less inconvenient nor the subsequent $1,400 dealer bill any less painful.

I do prefer the M113k to the turbo engines. Simpler, more down low instant torque and the SOHC engines sounds way better.

To bad no one makes an Eaton setup for these engines. A 2.65 would be wicked.

RVAE34

02-26-2019, 11:03 AM

Risk vs reward I suppose. Luckily I got a hell of a deal on this car with a massive pile of service history. Everything was done at MB and the car was taken in for the slightest of issues. It's a dream find as far as these cars go imo.

BryanS14

02-27-2019, 07:47 AM

Ha, too late! That was the first AMG I ever drove. 2014 e63. Loved the car but not exterior so I bought an 07 e63. I like this e55 much better than my old e63 even though it only had like 34k miles. This one has 89k.

Weistec 2.9L whipple, eurocharged tuning, weistec twin pump water cooled FMIC, snow methanol system, long tube headers, race cats, full exhaust etc. I know the builder who described it as a blank check build!

Sounds like an awesome car. It seems most people who have gone from W211 E55 to E63 or the other way almost always like the 55 more, its one of my all time favorite MB's. A coworker has a 42k mile 06 CLS55 that is stock. All my current MB's are slow. :(

Even though the biturbo V8's are awesome, I was talking about the S/CL/SL 600/65 V-12 cars. I keep forgetting MB has turbos all over the place now. I had an 06 S600, sooo much torque and soooo smooth and comfy.

Corbic

02-27-2019, 01:27 PM

Sounds like an awesome car. It seems most people who have gone from W211 E55 to E63 or the other way almost always like the 55 more, its one of my all time favorite MB's. A coworker has a 42k mile 06 CLS55 that is stock. All my current MB's are slow. :(

Even though the biturbo V8's are awesome, I was talking about the S/CL/SL 600/65 V-12 cars. I keep forgetting MB has turbos all over the place now. I had an 06 S600, sooo much torque and soooo smooth and comfy.Even brought back the I6. Damn Catt is bigger then the engine.

https://uploads.tapatalk-cdn.com/20190227/a5855f7efcaab143b00292250da531ae.jpg

https://www.caranddriver.com/news/a19479730/nine-things-you-must-know-about-the-new-mercedes-inline-six/

BryanS14

02-28-2019, 07:43 AM

Even brought back the I6. Damn Catt is bigger then the engine.

https://uploads.tapatalk-cdn.com/20190227/a5855f7efcaab143b00292250da531ae.jpg

https://www.caranddriver.com/news/a19479730/nine-things-you-must-know-about-the-new-mercedes-inline-six/

HMMMM wonder if I can get that turbo and head on my 92 190e 2.6. :bowrofl:

RVAE34

03-03-2019, 04:34 PM

The engine bay of the Z31 was just about wrapped up this weekend until they ran out of gass. Literally. I should have engine updates very soon.

The Skyline should be leaving Japan soon too and can't wait to see it.

Meanwhile, had the E55 polished and ceramic coated.

https://farm8.staticflickr.com/7801/47259334691_2834b5a203_b.jpg

https://farm8.staticflickr.com/7816/47259335441_34aa8180b5_b.jpg

https://farm8.staticflickr.com/7870/47259335691_b1e41bf14e_b.jpg

https://farm8.staticflickr.com/7818/33396930398_e3c3c7525c_b.jpg

https://farm8.staticflickr.com/7858/47272659201_96b437e743_b.jpg

https://farm8.staticflickr.com/7810/40303144973_362cf59089_b.jpg

BryanS14

03-04-2019, 07:51 AM

Love it! My favorite interior on the W211.

I had an 06 E500 4matic wagon. I bought it with 201k miles on it, sold it to a friend at 217k about a year ago and he has close to 240k on it now. The interior held up extremely well and looked better than some cars with 40k. The drivers bolster was the only noticeable issue. The only major exterior issues were the headlights yellowing and your typical rock chips. Your car should last a looong time.

RVAE34

03-17-2019, 05:38 AM

My machinist called me yesterday to say last chance to get pics before it starts going together.

While I was there he ran the crank on the balancer and said it's within NASCAR tolerance. He checked all the pistons and removed some weight to get them balanced and he had to slightly hone out the rods for the wrist pins.

CP said they wanted .0015 gap from piston to deck height at TDC and with the slight decking to get the block clean, it's slightly less than that at .00135 so after he does the final flow bench test on the head to check how much improvement was made, he can put it all back together and check valve to piston clearance and worst case, I get a slightly thicker head gasket but he doesn't think it's enough of a difference to matter so we will see.

Also added some carbon to the E55 ;)

https://farm5.staticflickr.com/4820/33521874898_343c6f5c3a_b.jpg

https://farm5.staticflickr.com/4874/33521875008_bda9d7a676_b.jpg

https://farm8.staticflickr.com/7804/47397733561_a09f082702_b.jpg

https://farm5.staticflickr.com/4853/47397733971_656c2ca37a_b.jpg

https://farm8.staticflickr.com/7842/46482684255_1d27b41d36_b.jpg

https://farm8.staticflickr.com/7911/46482684565_f3c6007b13_b.jpg

https://farm8.staticflickr.com/7824/47397734551_54703162aa_b.jpg

https://farm8.staticflickr.com/7921/46482684695_ed65f69ca5_b.jpg

https://farm5.staticflickr.com/4830/47397734701_0c729d0925_b.jpg

https://farm5.staticflickr.com/4888/46482685465_8d7347fe6f_b.jpg

https://farm5.staticflickr.com/4901/47397735421_fdc5a0d32e_b.jpg

https://farm5.staticflickr.com/4810/46482685625_5e16415e1c_b.jpg

https://farm8.staticflickr.com/7867/46482682865_9c89e63723_b.jpg

https://farm5.staticflickr.com/4808/46482682945_8587ba92c3_b.jpg

https://farm5.staticflickr.com/4913/47397732301_89ecb27d21_b.jpg

https://farm5.staticflickr.com/4907/47397735631_608812903e_b.jpg

https://farm5.staticflickr.com/4817/47397732451_5e385e14d0_b.jpg

https://farm8.staticflickr.com/7865/46482682605_91783c195c_b.jpg

https://farm8.staticflickr.com/7856/47353088341_494ebb7641_b.jpg

https://farm8.staticflickr.com/7828/46438012205_3043a51267_b.jpg

https://farm8.staticflickr.com/7849/46629864434_4561036841_b.jpg

https://farm8.staticflickr.com/7868/33476975338_82cddbc271_b.jpg

https://farm8.staticflickr.com/7854/32411114097_b135c1fbd4_b.jpg

https://farm8.staticflickr.com/7923/46438015045_d31be2a7eb_b.jpg

https://farm8.staticflickr.com/7872/46629865234_b0573fd880_b.jpg

https://farm8.staticflickr.com/7923/40387638343_3cb2b88a72_b.jpg

bardabe

03-18-2019, 07:26 PM

*insert eggplant emoji *

RVAE34

03-26-2019, 03:26 PM

Should be primed this week.

https://farm8.staticflickr.com/7851/47474403651_59a5da0a2f_b.jpg

https://farm8.staticflickr.com/7926/47474405211_782ec40561_b.jpg

https://farm8.staticflickr.com/7861/47474403761_712b2d92d3_b.jpg

https://farm8.staticflickr.com/7852/47474403861_6d3823ba1a_b.jpg

https://farm8.staticflickr.com/7916/47474404021_a764658b8c_b.jpg

https://farm8.staticflickr.com/7838/47474404131_44397e6a32_b.jpg

https://farm8.staticflickr.com/7809/47474404211_79eb0fc305_b.jpg

https://farm8.staticflickr.com/7888/47474404341_211ceeb914_b.jpg

https://farm8.staticflickr.com/7867/47474404481_7eef8cd8c0_b.jpg

https://farm8.staticflickr.com/7840/47474404651_54a3828b1c_b.jpg

https://farm8.staticflickr.com/7832/47474404741_41f8f0e66c_b.jpg

https://farm8.staticflickr.com/7815/46559068605_1ff6abe01a_b.jpg

https://farm8.staticflickr.com/7904/47474404941_15576a0351_b.jpg

https://farm8.staticflickr.com/7875/46559068755_1cecee01f1_b.jpg

https://farm8.staticflickr.com/7817/47474405131_6f056bbb97_b.jpg

https://farm8.staticflickr.com/7860/47474403541_862d898496_b.jpg

https://farm8.staticflickr.com/7809/46559068925_980a896d73_b.jpg

JIMB0

03-27-2019, 07:02 AM

cant wait to see that yellow!!!

BryanS14

03-27-2019, 07:36 AM

Clear coating the engine bay and making a steam punk engine bay? lol

da_crew10

03-28-2019, 12:04 PM

Gets better and better.

RVAE34

03-29-2019, 08:44 AM

My R30 car was picked up last night in Japan and will head to port very soon!

https://farm8.staticflickr.com/7845/33616247948_6f40866cfc_b.jpg

https://farm8.staticflickr.com/7862/33616247958_9342acda28_b.jpg

https://farm8.staticflickr.com/7863/32550483347_cc4bbd89d5_b.jpg

https://farm8.staticflickr.com/7814/33615872938_0087f9ba55_b.jpg

https://farm8.staticflickr.com/7899/46769093824_25c44c28d8_b.jpg

https://farm8.staticflickr.com/7850/32550483167_742cf56d7e_b.jpg

https://farm8.staticflickr.com/7905/32550481837_5618fc6f6a_b.jpg

https://farm8.staticflickr.com/7924/32550482837_c9d1975dfa_b.jpg

https://farm8.staticflickr.com/7925/32550481987_eba1071f09_b.jpg

https://farm8.staticflickr.com/7805/47492513491_4f7a7059aa_b.jpg

https://farm8.staticflickr.com/7817/47492523151_623199494e_b.jpg

https://farm8.staticflickr.com/7917/32550482217_4c59b574ae_b.jpg

https://farm8.staticflickr.com/7808/32550481137_82b663039f_b.jpg

5280VertDET

03-29-2019, 09:15 AM

https://media.tenor.com/images/aa3e97f7b0b6e0066bb2c53f5522b421/tenor.gif

jumpman2334

03-29-2019, 03:12 PM

christ that thing is beautiful. i think the r30s are my new favorite skyline. thanks. :)

RVAE34

03-29-2019, 03:20 PM

Mine too. And the FJ20 was the first 4 valve 4 cylinder in production vehicle and the most powerful 4 cylinder ever with the FJ20et at the time.

future

03-30-2019, 06:25 AM

Omg I'm in love

irax

04-02-2019, 07:20 PM

Mine too. And the FJ20 was the first 4 valve 4 cylinder in production vehicle and the most powerful 4 cylinder ever with the FJ20et at the time.

Nissans first 4 vavle 4 cyl any manufacturer ?

RVAE34

04-03-2019, 06:07 AM

I thought I had read the first in general but cannot confirm that. I did find where it said at the time it was the most powerful 4 cylinder engine ever made.

RVAE34

04-09-2019, 01:29 PM

Engine bay gets primed tomorrow morning!! This is getting close to being reality!!

https://live.staticflickr.com/1915/45221760572_9d68149af0_b.jpg

RalliartRsX

04-09-2019, 02:21 PM

Oh. FJ with modern ignition. Nice!

RVAE34

04-10-2019, 03:18 PM

Uggg, still not primed as there were a few small pin holes that still needed to be welded but at least it's in the booth.

https://live.staticflickr.com/7838/40614775833_2a8a1b3790_b.jpg

https://live.staticflickr.com/7906/40614775983_54997184d4_b.jpg

https://live.staticflickr.com/7864/40614776253_701abce793_b.jpg

https://live.staticflickr.com/7882/40614776303_6f006d6c9d_b.jpg

https://live.staticflickr.com/7847/47527870732_3744e38fd6_b.jpg

https://live.staticflickr.com/7823/33703917648_1f27d3ece8_b.jpg

https://live.staticflickr.com/7838/40614777043_59133e89df_b.jpg

https://live.staticflickr.com/7883/33703917888_8f64c42651_b.jpg

https://live.staticflickr.com/7890/33703915068_a99bacf2d6_b.jpg

https://live.staticflickr.com/7878/40614777193_bcacfdf428_b.jpg

https://live.staticflickr.com/7920/33703918428_52c418603a_b.jpg

https://live.staticflickr.com/7898/40614777523_85828268e5_b.jpg

https://live.staticflickr.com/7819/33703918648_7e4b536592_b.jpg

https://live.staticflickr.com/7827/47527872652_b296af0327_b.jpg

https://live.staticflickr.com/7885/33703918818_53f8ca9997_b.jpg

https://live.staticflickr.com/7915/40614774923_b192b6de69_b.jpg

https://live.staticflickr.com/7894/47527872872_085fabb3c1_b.jpg

RVAE34

04-10-2019, 04:54 PM

Yes!!!

https://live.staticflickr.com/7818/46666778255_79123c213e_b.jpg

feito

04-10-2019, 08:42 PM

Prepping a surface for paint down to bare metal gives me a huge erection.

RVAE34

04-11-2019, 05:29 AM

Thursday7

04-11-2019, 11:36 AM

My R30 is at the port ready to be loaded on a boat!! And the progress on the vision render.

https://live.staticflickr.com/7911/47532484492_4db55a48e6_b.jpg

https://live.staticflickr.com/7869/47532484512_f74ed6764f_b.jpg

https://live.staticflickr.com/7875/32638349227_b94cff4a1a_b.jpg

Have you considered anything other that wats? There's so many old school wheel options that would look righteous on that thing when you have wats on the Z31, with a few rebuilding options for smaller wheels stateside now. Impul D-01s or Starsharks would look the part. Just my $.02, you obviously have this figured out.

IIIXziuR

04-11-2019, 11:52 AM

You have some excellent taste, boss man.
That R30 is going to look sharp. The paint color and the interior as-is are so cool.

RVAE34

04-11-2019, 12:30 PM

I am just a huge fan of Watanabe's.

Thank you!

To say my expectations have been exceeded would be an understatement. It's amazing and the car should be painted next week!!

https://live.staticflickr.com/7916/47587699491_2b98b4b732_b.jpg

https://live.staticflickr.com/7812/47587699801_6dd2f0247a_b.jpg

https://live.staticflickr.com/7817/47587699721_62a5550f5c_b.jpg

https://live.staticflickr.com/7922/47587699841_d056366b82_b.jpg

https://live.staticflickr.com/7802/47587699931_1bdea32b49_b.jpg

https://live.staticflickr.com/7870/47534705922_a57910a0bb_b.jpg

https://live.staticflickr.com/7925/47534706022_d1f99c1668_b.jpg

https://live.staticflickr.com/7811/47534706232_62d338d40e_b.jpg

https://live.staticflickr.com/7812/47534706322_51d45a2af9_b.jpg

https://live.staticflickr.com/7887/47534706412_16559a4fd8_b.jpg

https://live.staticflickr.com/7923/47534706542_df2585ed7e_b.jpg

https://live.staticflickr.com/7854/47534706602_78436819f8_b.jpg

https://live.staticflickr.com/7832/47587699561_b43d222730_b.jpg

https://live.staticflickr.com/7807/47534706782_ac8295f758_b.jpg

https://live.staticflickr.com/7815/47534707182_9567002d32_b.jpg

RVAE34

04-12-2019, 03:08 PM

Ignore the runs and the small imperfections. It will be final smoothed by Wednesday. Then paint soon after! Check out the before and afters.

https://live.staticflickr.com/1845/44230125632_6189a088e1_b.jpg

https://live.staticflickr.com/7895/32652392327_846d0e75f5_b.jpg

https://live.staticflickr.com/850/41885489160_43094363bc_b.jpg

https://live.staticflickr.com/7836/47594881581_b3065a1781_b.jpg

https://live.staticflickr.com/7882/47594881171_eff637a896_b.jpg

https://live.staticflickr.com/7867/47541851172_d75e1e08f3_b.jpg

https://live.staticflickr.com/7893/47541851222_90559348d1_b.jpg

https://live.staticflickr.com/7870/47541851262_35b35ac364_b.jpg

https://live.staticflickr.com/7809/32652392127_4ef3dc73ca_b.jpg

https://live.staticflickr.com/7850/32652393027_62afc2f7a3_b.jpg

RVAE34

04-17-2019, 03:02 PM

Brand new R34 RB25 5 speed transmission!

https://live.staticflickr.com/65535/33754680718_7411556726_b.jpg

https://live.staticflickr.com/65535/40665533243_c018724275_b.jpg

teck

04-17-2019, 03:09 PM

Every bit of this thread makes me wanna build another Z31, such a quality build

IIIXziuR

04-17-2019, 03:21 PM

What does it feel like taking delivery of a brand new, never been grinded, never been mis-shifted RB25 transmission? Pretty sensational, I imagine.

RVAE34

04-17-2019, 03:59 PM

It's crazy. One of the coolest things I have purchased but not as cool as the NOS R30 skyline tail lights for my 84 on the way. They are so nice that I am afraid to install.

C. Anderson

04-19-2019, 10:51 AM

Good choice on the transmission. I picked one up for my rb26 build as well. For the price of new it's actually not that bad and close to what it would cost to find a used one and rebuilding it.

RVAE34

04-20-2019, 08:42 AM

I agree. And as far as I have gone on the car to date, I am not cutting any corners. I don't care how long it takes for the car to be finished, it's going to be done the right way.

RVAE34

05-04-2019, 07:43 AM

Talked to my machinist. The head flowed 90cfm over stock which he didn't have the base numbers for at the moment. By his calculations, the engine can make 400hp as is naturally aspirated but of course it most likely won't on pump gas. I was always hoping for 300 rwhp so we will see.

The body is being mocked up so it can be painted.

Dropped off the front subframe and torsion bar brackets for powdercoat and got a high quality reman steering rack.

IIIXziuR

05-04-2019, 09:10 AM

Patiently awaiting cool progress update pictures =)

RVAE34

05-09-2019, 11:16 AM

Machinist got the tighter main bearings and had crank, one rod and piston in so he can check piston to valve clearance.

He said he recalls stock intake cfm being 148 and he got it to 238! Got 75% of that on exhaust. Huge increase! He said should be done very soon now.

TheRealSy90

05-09-2019, 01:08 PM

I'm loving that FJ20ET in the R30. It's literally the predecessor to the sr20 and is basically an iron block sr20 with better valvetrain. Huge potential for power and durability but aftermarket support is few and far between outside of custom parts. Love it.

kanyedian

05-09-2019, 02:32 PM

I am crying this is so good!

I was looking at a lot of Zs like this before I ended up with my S13 vert. I totally love the direction you're going. And wow that color is so good. The builds on this site are out of control. I need to step my game up and stop being a sissy! aha Cheers from Tampa Bay

RVAE34

05-10-2019, 11:53 AM

Thank you, gentlemen!!

I went by to talk how we wanted the rear bumper to look. The first plan was to section, shorten and shave the 87-89 bumper but after we started comparing the two on the car, we decided to use the early rear bumper and he would start sectioning it. I was adament about having the rear bumper 1.5-2" closer to the body to match more modern proportions and ideally, I wanted to replicate the depth of an R34 GTR rear bumper. 30 minutes later he sent me this pic which is perfect!! He is going to fill that center bumper body line that's totally out of place too btw. The other two pics are just the start of the final mockup before paint. He was going to spend all day today and all day Monday on that so will post more photos soon.

https://live.staticflickr.com/65535/47819010301_d543df9d59_b.jpg

https://live.staticflickr.com/65535/46903060485_08d699c075_b.jpg

https://live.staticflickr.com/65535/46903060345_22b499847a_b.jpg

RVAE34

05-10-2019, 02:59 PM

So impressed! And a shot of how the old bumper looked to see how it was sectioned, shortened and will be blended.

https://live.staticflickr.com/65535/32876608307_8575f37d49_b.jpg

https://live.staticflickr.com/65535/47820426951_7f1ff20a97_b.jpg

https://live.staticflickr.com/65535/47820532351_804b706872_b.jpg

RVAE34

05-12-2019, 07:07 AM

Toon vectors

https://live.staticflickr.com/65535/47828778511_785059ab79_b.jpg

https://live.staticflickr.com/65535/47828793171_eb048b60dc_b.jpg

RVAE34

05-13-2019, 03:18 PM

About a year or so ago, all the detailed photos I had from the intial teardown got deleted somehow when there was a software update on my phone. I checked everywhere and could not find them. It was a heart wrenching moment when I realized it because I took such great care to document everything. Always knew the easiest thing would be to find another car to have and dissasemble it as I reassemble the other one. Mainly under the dash because I removed everything and it was quite a bit more complex than you would imagine. Can't hurt to have some spare parts along the way as well.

Today I found that car after searching almost daily ever since that initial moment where I lost everything. I only wanted something $500 or less and local within 20-30 miles. Not much to look at and has a locked up wheel but it's complete and original. They wanted $600, I offered $400 and then told them $500 and they could just call me back. We settled there and I think it's absolutely worth it. I already know of at least 3 parts I need which I have not been able to find.

I also just realized it has the $200+ mudflaps!

https://live.staticflickr.com/65535/32900233667_3049f96b84_b.jpg

https://live.staticflickr.com/65535/47054626484_8684a92245_b.jpg

RVAE34

05-14-2019, 03:05 PM

Machinist is putting the oil pump and crank gear on today! Then he can check the piston to valve clearance. The only slightly questionable number is the piston to deck clearance. CP wanted the flat portion of the piston to come out of the deck .014 inch and it's at .016 now. Hopefully minor enough that I don't need to up the HG from 1.2mm to 1.5mm. Very exciting that it's finally coming together.

Stopped by the body shop and the Kouki front end is all fitted and gapped. He is going to do some modificatons to eliminate the annoying rubber trim strip that goes between the bumper and fenders/hood. That and the long rear bumper have always been the small details I hated the most about the Z31. The side skirts are dry fitted and he will need to tighten them up a tad without the rubber gasket strip. I want everything to be super clean and tight.

https://live.staticflickr.com/65535/47851142751_6e5d16d7e2_b.jpg

https://live.staticflickr.com/65535/32907115937_467971ddc7_b.jpg

https://live.staticflickr.com/65535/32907116447_313a49952f_b.jpg

https://live.staticflickr.com/65535/33973806118_cf410e590c_b.jpg

https://live.staticflickr.com/65535/33973805688_d40c783248_b.jpg

https://live.staticflickr.com/65535/33973805518_c9097fb0df_b.jpg

https://live.staticflickr.com/65535/33973804978_4fee7ee380_b.jpg

kanyedian

05-14-2019, 03:13 PM

Very nice. Yes that line from the front wing to the bumper needs to be handled! Maybe able it up so it seems to progress into the fender or just eliminate it altogether like you were saying. I like the mismatch of colors too haha. but I know it will all be one in the end. That hue of yellow is so good

RVAE34

05-14-2019, 03:36 PM

The hood part is easy because you can slide the bracket forward ever so slightly. But the front sides of the bumper are moulded to have that piece so the mounting points stick out past the edge. They plan to cut that off and make a tab on the back side to reinforce and will adhere it back on. I am sure that is easy compared to everything else he has done so far. The side skirts don't quite bit as tight as we thought either so he plans to make a few modifications to bring them tighter to the body. It's really close now and I cannot wait to see it all in that color! But yes, the multi has quickly grown on me and it's been referred to as the Harlequin Z31 now lol.

Here is the piece being removed. It's a weird trim/spacer piece and when removed, creates a 1/8-3/16" gap between the bumper and fenders/hood.

https://live.staticflickr.com/65535/33974145648_97ab487e8a_o.jpg

supersayianjim

05-15-2019, 10:14 AM

sexy looking as usual

Wknd

05-15-2019, 11:26 PM

There's something oddly satisfying about mismatched panels and seeing the work in progress.
Can't wait for the end result.

RVAE34

05-20-2019, 05:59 PM

Agreed!

Picked up the front crossmember, torsion bar brackets and the intake manifold from the powdercoater.

https://live.staticflickr.com/65535/47104984984_1c64aa9d0f_b.jpg

https://live.staticflickr.com/65535/46978161345_fef6135458_b.jpg

https://live.staticflickr.com/65535/46978160605_a15ebda28f_b.jpg

NextTimeJr

05-20-2019, 08:20 PM

Looking good!! That shortened bumper looks so much better compared to the factory shelf of a bumper they had

Sent from my iPhone using Tapatalk

RVAE34

05-31-2019, 03:10 PM

The guy who bought my R31 wanted to have it painted before he took delivery. It's almost finished and then he will be back on my car. Engine should be finished any time and all he wants to do now is check piston to valve clearance with aggressive cam settings. Going to try and use some Mikuni 44PHH velocity stacks on the RB26 throttle bodies and just notch the holes since the RB is 70mm and the Mikuni's are 65mm center to center.

https://live.staticflickr.com/65535/47974712893_914a7fecc0_b.jpg

https://live.staticflickr.com/65535/47974757266_7d6990879c_b.jpg

https://live.staticflickr.com/65535/47974756841_d27050b50b_b.jpg

https://live.staticflickr.com/65535/47974712993_18c2cb456e_b.jpg

https://live.staticflickr.com/65535/47974757026_93549ffc37_b.jpg

https://live.staticflickr.com/65535/47974712828_f7e036f46b_b.jpg

kanyedian

06-02-2019, 01:43 PM

So yuummm. That two tone is oof! :wackit:

RVAE34

07-12-2019, 08:06 PM

https://live.staticflickr.com/65535/48268970462_efef86f54b_b.jpg

https://live.staticflickr.com/65535/48268893906_83cd71e490_b.jpg

https://live.staticflickr.com/65535/48268894296_cb1e139507_b.jpg

https://live.staticflickr.com/65535/48268969997_5336532792_b.jpg

https://live.staticflickr.com/65535/48268894416_c7eabcfb1e_b.jpg

https://live.staticflickr.com/65535/48268894746_04f0010c12_b.jpg

https://live.staticflickr.com/65535/48268895281_0860fb24c9_b.jpg

https://live.staticflickr.com/65535/48268895361_83d244068d_b.jpg

https://live.staticflickr.com/65535/48268971872_2b8750dc62_b.jpg

https://live.staticflickr.com/65535/48268895796_0b3f8a6735_b.jpg

https://live.staticflickr.com/65535/48268896026_12e63f3b76_b.jpg

https://live.staticflickr.com/65535/48268893781_39a3318538_b.jpg

RVAE34

07-13-2019, 07:21 AM

I definitely need to raise it back up a tad but man it looks good like this. I simply adore this car and am so impressed/pleased with my purchase. The underside is incredible with no rust or leaks of any sort. Everything is adjustable. Heims on the rear trailing arms, beautifully finished off rear upper shock adjusters accesible from the interior, adjustable tension rods, 2" bump steer spacers and almost all hardware is still cad plated. The interior is super nice and the racing seat really doesn't bother me.

The paint is very well done but it is not glass out so there is some minor tape lines on some of the rubber but it doesn't bother me at all. The hood fitment/finish is better than I expected being fiberglass but I am still looking for a stock steel one.

Best riding coilovers I have ever experienced.

Getting used to the diff but still definitelely want to switch to something more streetable.

Lastly, I kind of like the all green so not sure if I will follow through with the 2 tone wrap or not. Will at least give it a while.

https://live.staticflickr.com/65535/48271814737_b7e6cb35e4_b.jpg

https://live.staticflickr.com/65535/48271814887_ba202b2994_b.jpg

https://live.staticflickr.com/65535/48271815552_1d1f868ea6_b.jpg

https://live.staticflickr.com/65535/48271735556_82391548a7_b.jpg

https://live.staticflickr.com/65535/48271815767_58567997c0_b.jpg

https://live.staticflickr.com/65535/48271735691_23936d00a4_b.jpg

https://live.staticflickr.com/65535/48271735811_9cf0b3f2a7_b.jpg

https://live.staticflickr.com/65535/48271816377_d13d01d652_b.jpg

https://live.staticflickr.com/65535/48271736236_de6756dc71_b.jpg

https://live.staticflickr.com/65535/48271816517_47d1b13336_b.jpg

https://live.staticflickr.com/65535/48271816577_b305879556_b.jpg

https://live.staticflickr.com/65535/48271736386_4a30395857_b.jpg

https://live.staticflickr.com/65535/48271736456_ce0568b308_b.jpg

https://live.staticflickr.com/65535/48271816827_75d604c4d6_b.jpg

https://live.staticflickr.com/65535/48271736821_94ae1bb0cd_b.jpg

https://live.staticflickr.com/65535/48271817317_ba57466474_b.jpg

https://live.staticflickr.com/65535/48271737191_0542661e16_b.jpg

https://live.staticflickr.com/65535/48271817552_e853a7367c_b.jpg

https://live.staticflickr.com/65535/48271737321_06268d3926_b.jpg

https://live.staticflickr.com/65535/48271814497_3ca2df670d_b.jpg

https://live.staticflickr.com/65535/48271817677_50219e7d5d_b.jpg

https://live.staticflickr.com/65535/48271734426_dbf5e313c4_b.jpg

https://live.staticflickr.com/65535/48271817932_b16dfb1ac6_b.jpg

https://live.staticflickr.com/65535/48271733896_9f379c8ed3_b.jpg

https://live.staticflickr.com/65535/48271818017_9c0097fc96_b.jpg

https://live.staticflickr.com/65535/48271734036_56ed2f1b7b_b.jpg

future

07-13-2019, 09:52 AM

That MF clean

Ka24Power

07-13-2019, 10:28 AM

That R30 is beyond good. Never seen one that made me want to own one until now.

How’s the Z31 coming? Dying to see it with some paint, I’m sure you are too.

RVAE34

07-16-2019, 09:16 AM

Z31 is supposed to be done with paint in 3 weeks!

Counteract

07-19-2019, 02:09 AM

Your R30 is incredible! I searched the last few pages for a paint code but couldn't find one - is it Millennium Jade?

RVAE34

07-19-2019, 05:14 AM

Thank you and yes, it is millenium jade! It's a beautiful color and this car was incredibly well built. My expectations were exceeded which was fantastic after waiting 5 months for it to arrive!

RVAE34

07-22-2019, 06:15 PM

Engine done this week! The intake is advanced 1.5 degrees and the exhaust, 2 degrees for cam degree to spec. He said there is plenty of tolerance for far more aggressive settings on both.

Added some decals to the R30 and painted the upper windshield trim, mirrors and rear spoiler.

https://live.staticflickr.com/65535/48351143551_fd273b8296_b.jpg

https://live.staticflickr.com/65535/48351275142_f45c07ae19_b.jpg

https://live.staticflickr.com/65535/48351274657_928a6390e4_b.jpg

https://live.staticflickr.com/65535/48351275332_8e72617287_b.jpg

https://live.staticflickr.com/65535/48351143141_912dc41deb_b.jpg

https://live.staticflickr.com/65535/48351753417_1c405fae20_b.jpg

https://live.staticflickr.com/65535/48351577781_767a09d065_b.jpg

https://live.staticflickr.com/65535/48351710872_521ebcf75c_b.jpg

https://live.staticflickr.com/65535/48351578451_c0dd4840e5_b.jpg

RVAE34

07-26-2019, 09:01 AM

The z31 n/a fully built RB28 is finally done after almost 2 years. Just needs oil pan and rear main seal bolts to wrap up as they were somehow lost or misplaced.

JIMB0

07-26-2019, 09:43 AM

The z31 n/a fully built RB28 is finally done after almost 2 years. Just needs oil pan and rear main seal bolts to wrap up as they were somehow lost or misplaced.

where are the pictures!!!!

RVAE34

07-26-2019, 09:44 AM

I won't be picking it up until next week :(

augustus maximus

07-28-2019, 08:08 PM

where are the pictures!!!!
Of what car...oh you mean the Z31?

RVAE34

08-07-2019, 05:58 PM

The Z31 is back in action. There were some unsightly gaps to the body with the 87-89 side skirts on the 86 and the skirts themselves had small notches in the edge so my body guy trimmed them and welded in some metal which he shaped to close the gaps and retain the OE door gapping.

https://live.staticflickr.com/65535/48484172301_d74359e841_b.jpg

https://live.staticflickr.com/65535/48484169881_75252aba05_b.jpg

RVAE34

08-20-2019, 05:08 PM

Not much news on the Z31. The head studs pulled the threads out of the block on 2 holes at 95 of 105 ft lbs so machinist is talking it all apart and using timeserts on all the holes.

The R30 is live on stanceworks though!

http://www.stanceworks.com/2019/08/brandon-millers-1984-r30-nissan-skyline/

S14rebuild

08-20-2019, 06:57 PM

R30 is pure sex. Never had that older car style grab me before..but man that thing is ART

RVAE34

09-08-2019, 06:08 AM

The engine is finally done after timeserts were installed in all the stud holes. The issue ended up almost doubling my expected budget and in the end, I should have started with an RB30 or 26 block but the dissasembly was the same price no matter what and the block was already bored, decked with all the custom specs on the piston being used from the head/block so....

I won't be able to pick it up until October but the car likely won't be ready to come home anyway.

Either way, it's really close to being back so I can get to work on putting it back together.

RVAE34

09-17-2019, 03:36 PM

Front end is getting together and he is going above and beyond to get the gaps and surfaces all perfect.

The plan for the rear bumper was to put a filler piece in where the plywood is now but I feel like it makes the rear horizontal surface look too tall. I suppose if the bevel radius was perfectly carried around, it might not be too bad though. I was thinking drop that entire top section down to where it was cut making sure the top is flat and then build up the top under the tail lights/license plate recess and where the bumper meets the quarter to make sure that body line is mirrored. Thoughts?
https://live.staticflickr.com/65535/48751501317_2dc7fb8dee_b.jpg

https://live.staticflickr.com/65535/48751501267_2b159fa2b6_b.jpg

https://live.staticflickr.com/65535/48751309916_1d2d60293f_b.jpg

https://live.staticflickr.com/65535/48751309811_176457311d_b.jpg

https://live.staticflickr.com/65535/48750985018_efc14c0f3d_b.jpg

BryanS14

09-18-2019, 09:42 AM

That is one shitty body line/quarter/bumper transition. Not sure what I would do. Its like the quarter needs to be extended and wrapped around under the tail lights, but that would be a ton of metal work and money.

potatomonkey99

09-19-2019, 12:01 AM

Whats the deal with bogging the hood fenders and lights? Making them even then cutting them apart?

RVAE34

09-21-2019, 10:17 AM

More work on front with the wrap around trim delete between the fenders/hood and bumper. The JDM lip is apparently not very good and will need some work to be perfect.

FInished engine.

https://live.staticflickr.com/65535/48767068672_fe6f107ee3_b.jpg

https://live.staticflickr.com/65535/48766867046_44dc1784b2_b.jpg

https://live.staticflickr.com/65535/48767068142_2d4c703d4c_b.jpg

https://live.staticflickr.com/65535/48766532768_105db2c4d1_b.jpg

https://live.staticflickr.com/65535/48767068737_18a26034f1_b.jpg

https://live.staticflickr.com/65535/48769842391_06e2ce80e7_b.jpg

https://live.staticflickr.com/65535/48769842561_1aed16dde4_b.jpg

https://live.staticflickr.com/65535/48769508293_320af7e19a_b.jpg

https://live.staticflickr.com/65535/48769508358_4275b51516_b.jpg

https://live.staticflickr.com/65535/48770042507_d8554c475a_b.jpg

https://live.staticflickr.com/65535/48770041577_9fea359ac6_b.jpg

https://live.staticflickr.com/65535/48769508763_0762de8238_b.jpg

Ka24Power

09-21-2019, 02:16 PM

That RB ��

RVAE34

09-26-2019, 05:24 PM

Covers are finished with the intercooler notch and igniter delete. Finished in the same color as the exterior trim using an NOS door handle for comparison.

https://live.staticflickr.com/65535/48800923157_9aa0803b8c_b.jpg

https://live.staticflickr.com/65535/48800923272_5f3d2e722a_b.jpg

https://live.staticflickr.com/65535/48800922842_b05cc5530a_b.jpg

https://live.staticflickr.com/65535/48800922782_29fb3c6494_b.jpg

bardabe

09-28-2019, 08:48 PM

*eggplant emoji*

240_

09-29-2019, 02:09 PM

too much JDM goodness.

RVAE34

10-11-2019, 05:17 AM

The front bumper has the ugly bulging trim strips bonded and shaved along with the emblem hole. Now he just has to make the front spoiler fit better and finish the rear bumper and it's ready for paint!

Also, Watanabe R type's showed up 1.5 months early and fitment is dead on. Barely any clearance for the calipers.

https://live.staticflickr.com/65535/48866840418_3b4f9d10a2_b.jpg

https://live.staticflickr.com/65535/48867358426_2d091eab37_b.jpg

https://live.staticflickr.com/65535/48877562281_b6aa198f06_b.jpg

https://live.staticflickr.com/65535/48877462436_24fbc8b057_b.jpg

https://live.staticflickr.com/65535/48877659882_efbd848fb4_b.jpg

https://live.staticflickr.com/65535/48877660147_7c0687085a_b.jpg

https://live.staticflickr.com/65535/48877659542_33a60100c2_b.jpg

https://live.staticflickr.com/65535/48877464406_d6f7e06943_b.jpg

https://live.staticflickr.com/65535/48876931068_49979368c9_b.jpg

https://live.staticflickr.com/65535/48877660737_6dfa2e2820_b.jpg

https://live.staticflickr.com/65535/48876930748_db96ea1d99_b.jpg

https://live.staticflickr.com/65535/48876930603_cba3b3a5e4_b.jpg

https://live.staticflickr.com/65535/48876930433_a56a04ca72_b.jpg

https://live.staticflickr.com/65535/48877660147_7c0687085a_b.jpg

S14rebuild

10-11-2019, 06:37 AM

HOLY santa claus SHITTTTTT

RVAE34

10-19-2019, 06:31 PM

Hard to believe the engine has taken almost 2 years! It's finally home now though. Also, more photos of the 30 with the Watanabe's. I put some 3mm spacers on because the 7's I got were too much. I suppose 5 would be perfect.

https://live.staticflickr.com/65535/48926679832_d11b020afb_b.jpg

https://live.staticflickr.com/65535/48926484296_951b75b709_b.jpg

https://live.staticflickr.com/65535/48926679472_c704866d3f_b.jpg

https://live.staticflickr.com/65535/48925668026_87883ac5ee_b.jpg

https://live.staticflickr.com/65535/48925667841_4917710f8c_b.jpg

https://live.staticflickr.com/65535/48925132008_31e92bac6f_b.jpg

https://live.staticflickr.com/65535/48925132103_066e39e786_b.jpg

https://live.staticflickr.com/65535/48925865467_8dc23931c7_b.jpg

austinth0rnt0n

10-24-2019, 11:55 AM

so stoked for you man. I've been waiting to see that engine come home for ages, I can't imagine how excited you are to finally have it back. You're doing an awesome build for the z31 community. Definitely an inspiration my own 87 z31 turbo. Keep up the hard work man, I cannot wait for the NA RB to screaming down the road.

RVAE34

10-26-2019, 05:19 AM

Thank you!!

Final push before paint! He was working on the rear bumper when I left.

https://live.staticflickr.com/65535/48959791277_bda4ec7cc2_b.jpg

https://live.staticflickr.com/65535/48959791227_f0649669f5_b.jpg

https://live.staticflickr.com/65535/48959791182_3e95ab25ba_b.jpg

https://live.staticflickr.com/65535/48959051698_356a2464f4_b.jpg

https://live.staticflickr.com/65535/48959603561_eb57e461ba_b.jpg

https://live.staticflickr.com/65535/48959051623_7e68c7f29c_b.jpg

https://live.staticflickr.com/65535/48959603486_25866ba276_b.jpg

future

10-27-2019, 08:25 PM

TheRealSy90

10-28-2019, 05:25 PM

Man, your body work guy is amazing.

S14rebuild

10-30-2019, 04:56 PM

My cars about to hit bodywork time....im hopen and prayn his work is equal to this.....

Car is amazing

RVAE34

11-01-2019, 05:28 AM

This is one of the few threads I come here for. I know it might not mean shit to you but believe me people watch this thread. I just never know what to say so I never post. But keep it going! So close

Thank you for that! Gives me the warm and fuzzies!!!

Man, your body work guy is amazing.

You aren't kidding!

My cars about to hit bodywork time....im hopen and prayn his work is equal to this.....

Car is amazing

Me too and thank you!

Filler piece added to the top of the rear bumper to clean up all the gaps and make the lines look like factory. Now just the front spoiler is all that's left before it gets ready to go into the paint booth!!!!!

https://live.staticflickr.com/65535/48994806998_33ba42b9e3_b.jpg

https://live.staticflickr.com/65535/48995550602_b3bd9bb446_b.jpg

https://live.staticflickr.com/65535/48994807008_aa6ef22449_b.jpg

Thursday7

11-02-2019, 09:23 AM

irax

11-02-2019, 05:35 PM

This is pretty much the only thread that brings me back to Zilvia

RVAE34

11-16-2019, 06:11 AM

Greatly appreciate the kind words, everyone!

There had been a few cracks in the primer so he took a bunch of areas back down to metal on the main body. Rear bumper progressing well and he took the liberty of sanding the inner doors down to bare metal which I didn't even ask! He is trying to make my car the ultimate showcase of his abilities and I am happy to be a rolling billboard for his work!

https://live.staticflickr.com/65535/49066493441_ac68482106_b.jpg

https://live.staticflickr.com/65535/49065974478_a4e16d404a_b.jpg

https://live.staticflickr.com/65535/49066493751_d275d4c2d3_b.jpg

https://live.staticflickr.com/65535/49066706287_29b57476df_b.jpg

https://live.staticflickr.com/65535/49066494086_12e0757b2d_b.jpg

https://live.staticflickr.com/65535/49066494146_31c65aecfe_b.jpg

https://live.staticflickr.com/65535/49073310806_9aa7f7e263_o.jpg

RVAE34

11-22-2019, 04:14 PM

Getting ready for final prime and next week the jams will see color! Then the rest of the car. So much excite!

https://live.staticflickr.com/65535/49107030962_21ec69c5f1_b.jpg

https://live.staticflickr.com/65535/49106332338_07c2dc77fe_b.jpg

https://live.staticflickr.com/65535/49106841166_f2689feeff_b.jpg

https://live.staticflickr.com/65535/49106840576_f5847eb513_b.jpg

https://live.staticflickr.com/65535/49106332628_0da4d0ba6a_b.jpg

https://live.staticflickr.com/65535/49106332768_fa5302977a_b.jpg

https://live.staticflickr.com/65535/49107030802_22064593bf_b.jpg

https://live.staticflickr.com/65535/49106332143_b7e91ba0bb_b.jpg

https://live.staticflickr.com/65535/49106841646_db37c2a80b_b.jpg

https://live.staticflickr.com/65535/49106841806_59c3d4ecdb_b.jpg

RVAE34

11-27-2019, 01:10 PM

https://live.staticflickr.com/65535/49129006558_716efed5b4_b.jpg

https://live.staticflickr.com/65535/49129496851_5036fa9f16_b.jpg

https://live.staticflickr.com/65535/49129006683_12ca9356e3_b.jpg

https://live.staticflickr.com/65535/49129680962_b26efd4e7d_b.jpg

https://live.staticflickr.com/65535/49129680822_841aef2e5e_b.jpg

https://live.staticflickr.com/65535/49133498223_902c5a7d12_b.jpg

https://live.staticflickr.com/65535/49133498228_d7183d5c51_b.jpg

https://live.staticflickr.com/65535/49133501233_618179342e_b.jpg

https://live.staticflickr.com/65535/49133989051_42ebce50d2_b.jpg

RVAE34

12-01-2019, 05:46 AM

Color next week for sure! It's like Christmas for me.

https://live.staticflickr.com/65535/49151484101_1378cce309_b.jpg

https://live.staticflickr.com/65535/49150990568_ac27a6c91c_b.jpg

https://live.staticflickr.com/65535/49150990573_0421b0847e_b.jpg

future

12-01-2019, 11:36 PM

Did you ever post what color?

RVAE34

12-05-2019, 03:22 PM

https://live.staticflickr.com/65535/49175389017_76342ebe21_b.jpg

https://live.staticflickr.com/65535/49174685223_5dff0138e4_b.jpg

https://live.staticflickr.com/65535/49175234612_424ed20c3f_b.jpg

https://live.staticflickr.com/65535/49175234622_2d970025be_b.jpg

Ka24Power

12-05-2019, 07:50 PM

Duuuude how can you tease us like that???

I've been checking this thread way too often hoping for updates. Can't wait to see more!

S14rebuild

12-05-2019, 08:37 PM

Hmmmmm, wanna see it together...color is an interesting choice

RVAE34

12-06-2019, 05:27 AM

The color is an original Nissan color used on the 240z and Hakosuka GT-R. It is my favorite Datsun/Nissan color and was the one on the 240Z my dad and I restored together. It's perfectly fitting for my vision of a restored Z31 version of a Datsun 240Z Z432.

The body should be painted tomorrow!

https://live.staticflickr.com/1915/45221760572_9d68149af0_b.jpg

Thursday7

12-06-2019, 07:55 AM

Safari Gold is to die for. I cannot wait to see this come together.

BryanS14

12-06-2019, 07:59 AM

Dude... That color is insane.

Your body guy and painter to some top notch work.

Beautiful!

Super_OK_S13

12-07-2019, 12:10 PM

I am Super excited to see this car painted and all the body work looks like it WILL pay off in the end.

RVAE34

12-09-2019, 05:24 AM

All that is left now is cutting the holes in the front fenders for JDM mirrors then mounting the doors. Color later today and clear tomorrow supposedly. Also took the R30 for the likely last drive before winter.

https://live.staticflickr.com/65535/49189884758_8c3e6652dc_b.jpg

https://live.staticflickr.com/65535/49189884763_c4bd9e2fba_b.jpg

https://live.staticflickr.com/65535/49189319293_c05b6e6310_b.jpg

https://live.staticflickr.com/65535/49189822221_3d08760dfd_b.jpg

https://live.staticflickr.com/65535/49190018072_e57c20aff9_b.jpg

https://live.staticflickr.com/65535/49189319013_8ce2558698_b.jpg

https://live.staticflickr.com/65535/49189318713_2f1c6a41df_b.jpg

JIMB0

12-09-2019, 07:05 AM

i cannot wait to see this completed.

you create some really great cars

S14rebuild

12-09-2019, 08:23 AM

Legendary thread!!

TheRealSy90

12-09-2019, 09:02 AM

Since the FJ20 was basically the prototype to the SR20 how does it feel in comparison? I would guess that they drive very similarly.

RVAE34

12-10-2019, 05:20 AM

I love the FJ20! And yes, very similar in power delivery to the SR. Has a unique sound though.

Woke up to these in my email! Btw, I meant JDM markers not mirrors before..

https://live.staticflickr.com/65535/49197938923_c60e3dc789_o.jpg

https://live.staticflickr.com/65535/49198434326_d4411ce11f_o.jpg

https://live.staticflickr.com/65535/49198434261_556e48b90c_o.jpg

https://live.staticflickr.com/65535/49197938868_4c9ac3d90f_o.jpg

https://live.staticflickr.com/65535/49197938863_cfd1d0a3c6_o.jpg

https://live.staticflickr.com/65535/49198633657_e9169dfc24_o.jpg

https://live.staticflickr.com/65535/49198433386_ccb64c0dd6_o.jpg

https://live.staticflickr.com/65535/49197936438_eb48639e2d_o.jpg

BryanS14

12-10-2019, 07:20 AM

Beautiful!

RVAE34

12-10-2019, 02:49 PM

https://live.staticflickr.com/65535/49200861631_8b84442f94_b.jpg

https://live.staticflickr.com/65535/49200861176_e44f542e87_b.jpg

https://live.staticflickr.com/65535/49200861701_0cb4d02f3d_b.jpg

https://live.staticflickr.com/65535/49201064087_04eb0c143b_b.jpg

https://live.staticflickr.com/65535/49200369423_d6a08292cf_b.jpg

https://live.staticflickr.com/65535/49201063837_a93a53d92a_b.jpg

https://live.staticflickr.com/65535/49200369758_31cbf62dc1_b.jpg

https://live.staticflickr.com/65535/49200370023_a6d0bddb71_b.jpg

https://live.staticflickr.com/65535/49200370323_70a7641093_b.jpg

https://live.staticflickr.com/65535/49200861421_ba9f121224_b.jpg

https://live.staticflickr.com/65535/49201064887_0211ca6613_b.jpg

https://live.staticflickr.com/65535/49200370928_abca462b87_b.jpg

https://live.staticflickr.com/65535/49200862126_aa605b784c_b.jpg

https://live.staticflickr.com/65535/49201065732_465779debd_b.jpg

https://live.staticflickr.com/65535/49200862586_20bd8e68b4_b.jpg

https://live.staticflickr.com/65535/49200862901_7c700358a0_b.jpg

https://live.staticflickr.com/65535/49200862966_2ed54e977d_b.jpg

EF_jaycee

12-10-2019, 07:39 PM

wooohooo, im so happy to see it nice and painted!!!

CamryOnBronze

12-13-2019, 07:24 AM

A friend recently told me to check out this thread and I am so glad I did! Awesome read. So cool to see it painted. Keep up the good work!

ingmar F

12-16-2019, 02:43 AM

awesome project! and that color is great

feito

12-16-2019, 09:45 PM

https://www.reactiongifs.us/wp-content/uploads/2014/03/stop_penis_erect_archer.gif

RVAE34

12-21-2019, 05:42 AM

More color

https://live.staticflickr.com/65535/49249759978_4b2c2ff02d_b.jpg

https://live.staticflickr.com/65535/49249759983_6470da1f33_b.jpg

https://live.staticflickr.com/65535/49250434722_6f28e5d040_b.jpg

future

12-21-2019, 06:23 PM

Not a bad way to spend 30k

RVAE34

12-22-2019, 10:45 AM

A bit high but not too far off.

tb13

12-22-2019, 11:22 AM

Dude this thing is going to be stunning, can't wait to see how it all comes together and hear that N/A RB sing!

Jens

12-24-2019, 12:49 AM

This is Amazing, i never knew that i needed a Yellow Z in my life until now!

RVAE34

12-31-2019, 02:19 PM

Final body work on the sectioned, shortened and shaved rear bumper! This ended up being the most challenging part of the project so far.

https://live.staticflickr.com/65535/49306174268_7d4d54f6a8_o.jpg

https://live.staticflickr.com/65535/49306174273_c8668e99ac_b.jpg

https://live.staticflickr.com/65535/49306875857_6bc2441d23_b.jpg

RVAE34

01-05-2020, 06:12 AM

3rd most difficult part of the project. Behind the engine bay/S14 rear subframe swap.

This bumper is intended to look more like a kouki rear without the over riders/bumper crash bulges. It's sectioned into 7 pieces, shortened to the body by 2-3" and then shaved. Entirely made from a zenki bumper.

https://live.staticflickr.com/65535/49324903542_766d53b2d8_b.jpg

RVAE34

01-09-2020, 03:22 PM

To say I am impressed with the way the rear bumper came out would be an understatement. Also, he wasn't quite happy with the engine bay so he is spraying it again.

https://live.staticflickr.com/65535/49358210488_88bf82decf_b.jpg

https://live.staticflickr.com/65535/49358669326_6484c0817f_b.jpg

https://live.staticflickr.com/65535/49358874437_8c2fb22382_b.jpg

https://live.staticflickr.com/65535/49358673961_cb63e4716c_b.jpg

https://live.staticflickr.com/65535/49358214783_a15aea0e36_b.jpg

https://live.staticflickr.com/65535/49358669221_4faa086e33_b.jpg

https://live.staticflickr.com/65535/49358874002_45f4dbef8f_b.jpg

Break Beat

01-17-2020, 10:03 AM

Updates?! I love the attention to detail!

RVAE34

01-23-2020, 06:58 AM

Techno Toy Tuning control arms, tie rod ends, tension rods and BBK for the Z31. Inner fender sprayed so the fenders can be mounted. Then the front bumper which will allow final fitment on the front spoiler. After that, the rest of the paint will go on. Very close!

https://live.staticflickr.com/65535/49426248103_78a62882b2_b.jpg

https://live.staticflickr.com/65535/49426247938_586e4d636d_b.jpg

https://live.staticflickr.com/65535/49426720321_71196633fd_b.jpg

https://live.staticflickr.com/65535/49364669641_dab430d370_b.jpg

https://live.staticflickr.com/65535/49384518392_be9ede71d4_b.jpg

https://live.staticflickr.com/65535/49383856258_928c1d4a54_b.jpg

https://live.staticflickr.com/65535/49426968847_c9bbf63f7a_o.jpg

https://live.staticflickr.com/65535/49426271563_50e1cd4fef_o.jpg

Break Beat

01-23-2020, 02:57 PM

What brand undercoating are you using? It looks great.

RVAE34

01-24-2020, 04:20 PM

I forgot to ask but will next time^.

https://live.staticflickr.com/65535/49435942778_15bfddd6bd_b.jpg

https://live.staticflickr.com/65535/49436417986_ed43c2712c_b.jpg

https://live.staticflickr.com/65535/49436418076_71b42e000f_b.jpg

https://live.staticflickr.com/65535/49436418226_6a421bc356_b.jpg

https://live.staticflickr.com/65535/49435943533_9b6085b46f_b.jpg

https://live.staticflickr.com/65535/49436640757_23e544b866_b.jpg

https://live.staticflickr.com/65535/49435943723_4ca817d61a_b.jpg

https://live.staticflickr.com/65535/49436641237_535ff82741_b.jpg

https://live.staticflickr.com/65535/49435942898_0fc7036102_b.jpg

https://live.staticflickr.com/65535/49436419596_ecfa69574b_b.jpg

https://live.staticflickr.com/65535/49435944988_f597cfdabc_b.jpg

https://live.staticflickr.com/65535/49436420081_c33c9691f1_b.jpg

https://live.staticflickr.com/65535/49435945348_f34d9f0c5f_b.jpg

https://live.staticflickr.com/65535/49436642652_9104855c9f_b.jpg

https://live.staticflickr.com/65535/49435945783_1dcb46bd55_b.jpg

https://live.staticflickr.com/65535/49435946098_f24ca299e9_b.jpg

https://live.staticflickr.com/65535/49436643542_bc9859fc91_b.jpg

https://live.staticflickr.com/65535/49436643817_43ddd09e86_b.jpg

https://live.staticflickr.com/65535/49436421506_36d3fcd173_b.jpg

https://live.staticflickr.com/65535/49435943363_349d52621c_b.jpg

Tearlessj

02-05-2020, 12:30 PM

Looks great! Your body guy really knows what he's doing. Did you ever find out the brand of the undercoating?

5280VertDET

02-05-2020, 05:22 PM

Just bought an E38 for an offroad race, Gambler 500, and found your E38/M5 build. Spectacular. Looking forward to this.

feito

02-05-2020, 08:58 PM

Bro, I wouldnt even dare to tighten up the bolts that go on the body.... so pristine!

Thursday7

02-06-2020, 07:53 AM

Bro, I wouldnt even dare to tighten up the bolts that go on the body.... so pristine!

Lol forreal. Nylon washer under errythang.

RVAE34

02-09-2020, 05:58 AM

Just bought an E38 for an offroad race, Gambler 500, and found your E38/M5 build. Spectacular. Looking forward to this.

Thanks!

Bro, I wouldnt even dare to tighten up the bolts that go on the body.... so pristine!

Lol forreal. Nylon washer under errythang.

Haha, then the gaps would be off. But I hear you!

Last parts should be painted tomorrow or Tuesday! Until then, some shots I took of the R30.

https://live.staticflickr.com/65535/49505970168_da1c01b561_b.jpg

https://live.staticflickr.com/65535/49505970293_819bab2571_b.jpg

https://live.staticflickr.com/65535/49506478056_8e082e5270_b.jpg

https://live.staticflickr.com/65535/49506478216_e4d7328616_b.jpg

https://live.staticflickr.com/65535/49506698007_91fb65afee_b.jpg

https://live.staticflickr.com/65535/49505971133_90ce71d5c2_b.jpg

https://live.staticflickr.com/65535/49506478466_73449275b1_b.jpg

https://live.staticflickr.com/65535/49506694237_91bf961171_b.jpg

https://live.staticflickr.com/65535/49506477411_a99a2e5c72_b.jpg

future

02-09-2020, 09:20 AM

Oh baby.......

Bluejayde

02-11-2020, 01:18 PM

I like it. Raw.

AndrewS13

02-18-2020, 05:12 PM

Can't wait to see the 300zx all finished up. The swap was an interesting choice but I dig it.

Jens

02-19-2020, 03:07 AM

Damn, these cars man. I have never seen Build on this level. Mad respect!!

RVAE34

02-19-2020, 05:52 PM

Thanks, everyone!!!

Front bumper is on and the final major item is getting proper fitment of the JDM style front spoiler which fit terribly out of the box. Next is the underside getting sprayed all black, final assembly of the car, cut and polish then painting and installing the trim. So close!!

https://live.staticflickr.com/65535/49558065443_c6543a90e7_b.jpg

https://live.staticflickr.com/65535/49558797257_e1cb0a502c_b.jpg

https://live.staticflickr.com/65535/49558797582_3ff5292cf2_b.jpg

https://live.staticflickr.com/65535/49558797957_df5f9cdfd6_b.jpg

https://live.staticflickr.com/65535/49558562401_d060d91c41_b.jpg

https://live.staticflickr.com/65535/49558066148_272afcf0ee_b.jpg

https://live.staticflickr.com/65535/49558066253_d25d0919fd_b.jpg

https://live.staticflickr.com/65535/49558066358_7fa45e40ab_b.jpg

https://live.staticflickr.com/65535/49558563536_c25d209d62_b.jpg

https://live.staticflickr.com/65535/49558563866_028b66ef88_b.jpg

https://live.staticflickr.com/65535/49558564041_e16b908368_b.jpg

https://live.staticflickr.com/65535/49558564331_6d2eed28e0_b.jpg

https://live.staticflickr.com/65535/49558561261_263cab6f89_b.jpg

https://live.staticflickr.com/65535/49558799997_769e78d15a_b.jpg

https://live.staticflickr.com/65535/49558564991_a1ddf32cf8_b.jpg

https://live.staticflickr.com/65535/49558068633_ff48e162af_b.jpg

https://live.staticflickr.com/65535/49558800877_ebaa47e42b_b.jpg

https://live.staticflickr.com/65535/49558565411_c4a4010d47_b.jpg

https://live.staticflickr.com/65535/49558565526_ea4561e880_b.jpg

https://live.staticflickr.com/65535/49558801317_ddf15023d4_b.jpg

https://live.staticflickr.com/65535/49558566231_29bb8af2f7_b.jpg

https://live.staticflickr.com/65535/49558070723_f0f384fc77_b.jpg

https://live.staticflickr.com/65535/49558803287_8e00b2084f_b.jpg

https://live.staticflickr.com/65535/49558071338_a43e912797_b.jpg

https://live.staticflickr.com/65535/49558796762_bc594b3cc2_b.jpg

Donedreamin

02-19-2020, 06:31 PM

This is quality!

RVAE34

02-26-2020, 06:09 PM

Wetsanding commences. He said it will be ready to leave in 2 weeks! Then I will have it towed to the place that does XPel clear wrap to have the front bumper, hood, fenders and rockers done then it will go to my best friends house for wiring and the installation of the engine and brand new R34 5 speed transmission. Then back to me for the rest of the reassembly.

https://live.staticflickr.com/65535/49589932877_7e95aa337f_b.jpg

https://live.staticflickr.com/65535/49589933047_9d80c82868_b.jpg

https://live.staticflickr.com/65535/49589933212_b2f993342f_b.jpg

https://live.staticflickr.com/65535/49589200158_d0db23fc53_b.jpg

https://live.staticflickr.com/65535/49589933647_beb6412084_b.jpg

https://live.staticflickr.com/65535/49589933712_996bb15a95_b.jpg

https://live.staticflickr.com/65535/49589933597_9063b25d00_b.jpg

https://live.staticflickr.com/65535/49589933447_15f5d955ea_b.jpg

BryanS14

02-27-2020, 08:02 AM

Seeing an update on this car is like seeing a notification that Bad Obsession Motorsports has an update on project Binky.

You might have already answered this, but is the work being done at a large collision repair shop or is it a couple of guys that do unique repairs/builds like yours? There are some interesting cars in the background of some of your pics.

Either way they do amazing work and the car is beautiful, cannot wait to see it done.

RVAE34

02-27-2020, 08:18 AM

da_crew10

02-27-2020, 08:42 AM

Wow this keeps getting even better!

BryanS14

02-27-2020, 09:55 AM

Yeah, just a small shop with 3 guys. No insurance work. He really just wants to do stuff like my project. My goal/dream is to retire early and build cars like this to sell. Hopefully that will happen sooner than later and I have a bunch of friends who are all amazing in individual fields that I'd like to pool together for an all in one custom shop.

Very cool.

I work at a body shop, we are mainly an insurance repair shop. I do minor restorations when I have time on the side. Would love to have the time, wife + 2 kids under 6 + house = no time for big toy projects. :wtc:

feito

02-27-2020, 01:23 PM

Excuse me sir, if I were to travel to you, would you let me lick your car before they re-assemble it? Please? just a few passes here and there

RVAE34

02-28-2020, 03:20 PM

LOL

It just got put on the lift for full undercoating. So close!!!! The hanging wheels are to counterbalance until the rear subframe comes out.

https://live.staticflickr.com/65535/49597614811_39a6f69546_b.jpg

https://live.staticflickr.com/65535/49597118913_d8a6fe4df3_b.jpg

https://live.staticflickr.com/65535/49597865532_28454ec2a6_b.jpg

https://live.staticflickr.com/65535/49597615531_6da3cda048_b.jpg

https://live.staticflickr.com/65535/49597614886_ce91a978b3_b.jpg

https://live.staticflickr.com/65535/49597117973_83f7b3bcbd_b.jpg

https://live.staticflickr.com/65535/49597865262_3643439f1f_b.jpg

RVAE34

03-05-2020, 12:19 PM

Took the engine, trans and tons of parts to my friends house who is doing the wiring and fabrication to fit the NOS R34 5 speed trans. I ordered a wiring specialties harness, coils, injectors, iat sensor, knock sensors, radium fuel rail and FPR.

Prototype throttle linkage is underway now along with carbon kevlar velocity stacks!

https://live.staticflickr.com/65535/49622982503_e7cbd4879b_b.jpg

https://live.staticflickr.com/65535/49623498556_d5d6c72d41_b.jpg

da_crew10

03-05-2020, 12:39 PM

I love those VA plates....

RVAE34

03-08-2020, 04:47 PM

Should have some solid updates on the Z31 soon but in the meantime, shot my dad's 240z's along with my R30. Missing from the photo is my Z31, his Z32 300zx and his NSX. Was definitely too bright out but it was the only time we had.

https://live.staticflickr.com/65535/49637136592_a66c6522c1_b.jpg

https://live.staticflickr.com/65535/49636338053_355fdbab40_b.jpg

https://live.staticflickr.com/65535/49637137007_fcb318893c_b.jpg

https://live.staticflickr.com/65535/49636337023_29bcc6c0fd_b.jpg

https://live.staticflickr.com/65535/49637137207_52f0d418e5_b.jpg

https://live.staticflickr.com/65535/49636867051_0f09606be2_b.jpg

https://live.staticflickr.com/65535/49636867216_045b295c33_b.jpg

https://live.staticflickr.com/65535/49636339008_48174edcc8_b.jpg

https://live.staticflickr.com/65535/49637138222_930b498762_b.jpg

https://live.staticflickr.com/65535/49637138437_8ca5ef39b1_b.jpg

https://live.staticflickr.com/65535/49636339713_f496cc1835_b.jpg

https://live.staticflickr.com/65535/49637138742_72b432fdb0_b.jpg

https://live.staticflickr.com/65535/49637138887_4a23e7b799_b.jpg

https://live.staticflickr.com/65535/49636865226_a6a1c9b95d_b.jpg

https://live.staticflickr.com/65535/49637135922_e9630c36c4_b.jpg

https://live.staticflickr.com/65535/49636868306_4d8759ef94_b.jpg

https://live.staticflickr.com/65535/49637139162_fedbdc0980_b.jpg

https://live.staticflickr.com/65535/49636868756_6f7764c5f9_b.jpg

https://live.staticflickr.com/65535/49637139562_a797fbfb00_b.jpg

https://live.staticflickr.com/65535/49636337303_03c8422034_b.jpg

ingmar F

03-09-2020, 04:34 AM

wow thats a nice collection! awesome work on the z31!

RVAE34

03-09-2020, 05:13 PM

Thanks!

Almost ready for undercoat. He found one small pinhole where the subframe mounts to the floor so once that is fixed, the entire underside will be cleaned and coated. The front spoiler will be ready for paint soon.

https://live.staticflickr.com/65535/49641651917_3c82bf53f4_b.jpg

https://live.staticflickr.com/65535/49641376326_a6364389b5_b.jpg

https://live.staticflickr.com/65535/49640852233_c6d28b2175_b.jpg

https://live.staticflickr.com/65535/49641376126_3cb0c211e2_b.jpg

https://live.staticflickr.com/65535/49641376221_5b06375a43_b.jpg

https://live.staticflickr.com/65535/49641651997_b4ee149068_b.jpg

future

03-09-2020, 08:27 PM

I might have missed it but was your R31 built the same way as this?

RVAE34

03-10-2020, 05:23 AM

You mean the r30? Because I had an r31 too but sold it to buy this r30. I bought this car from Japan mostly as you see but added the Watanabe's and 2 tone. It was similarly built though with extensive modification and amazing attention to detail. I was really nervous buying a car sight unseen from Japan but in the end it was about twice as good as I could have hoped. I basically stole it.

RVAE34

03-14-2020, 05:47 AM

Undercoat is done. Now just finish buffing and paint/install the trim and rubber door/t top seals and she comes home. I would imagine 7-10 days. He also notched the frame rails and welded in some metal to box it in so that the control arms can have full clearance just in case I ever wanted it to almost lay frame. Not that I ever will but I wouldn't ever want to have to go back in and have it done.

https://live.staticflickr.com/65535/49649257731_bf8459fa58_b.jpg

https://live.staticflickr.com/65535/49655809201_9a888bc50a_b.jpg

https://live.staticflickr.com/65535/49655809026_c970b86528_b.jpg

https://live.staticflickr.com/65535/49655271463_5d614efe1c_b.jpg

https://live.staticflickr.com/65535/49655808421_60eaeb395e_b.jpg

https://live.staticflickr.com/65535/49655270933_af39534096_b.jpg

https://live.staticflickr.com/65535/49655807966_79f746aab6_b.jpg

future

03-14-2020, 10:03 AM

Sorry R30

But yes. But if so, your builds are insane. I can comprehend ever building a car to this level

RVAE34

03-14-2020, 10:21 AM

I don't intend to ever do anything like this again unless I open a business to build cars which is my dream. I also typically sell cars within 2 years but clearly this one is different from all my prior cars.

Super_OK_S13

03-15-2020, 08:07 AM

RVAE34

03-15-2020, 03:55 PM

Thank you and no, neither of us have been. This year is up in the air on stuff like that with the virus.

Bought an ultrasonic cleaner along with a bunch of CLR for cleaning factory bolts. The first two images is before and after with just 20 minutes at 50 degrees celcius. My friend is getting other parts in order. The car should be a roller again this week and should be coming home soon.

https://live.staticflickr.com/65535/49662789783_8488765d09_b.jpg

https://live.staticflickr.com/65535/49663326006_74948db323_b.jpg

https://live.staticflickr.com/65535/49663326206_53b36416f1_b.jpg

https://live.staticflickr.com/65535/49663611452_a48849c73e_b.jpg

https://live.staticflickr.com/65535/49663611677_62328bbf5a_b.jpg

https://live.staticflickr.com/65535/49662790568_cfbc5a431d_b.jpg

https://live.staticflickr.com/65535/49663611582_384c654b65_b.jpg

Thursday7

03-17-2020, 12:42 PM

I really love following this build. It truly is a resto-mod build!!

By chance have you or your dad ever come to the Carlisle PA, Import and Performance car show? this year it is from may 15th-17th. This year there is a 50 years of Datsun Z display. Check this link for info!!

https://www.carlisleevents.com/events/events-detail/index?id=import+and+performance+nationals

I've been going to that show for 10+ years now and its dwindled down in size from the tuner show, so they added the import/kit car show together in hopes of making the show bigger in size.. I'll have my S13 there at the show this year for sure. I hope to see you or meet you if you guys go!!

I'd love too see some of your dad's/friends Z's at Carlisle this year RVAE. This will be my 4th year there, not usually one for car shows but the variety there is always impressive. The drifting there is subpar but it's a good season-start shakedown event with plenty of other activities and partying to do. It's basically lawless there.

Sucks that the covid may fuck it up. Carlisle is a blast even though it's just a car show with lackluster drifting.

Cool progress on the thread as always.

RVAE34

03-19-2020, 04:40 PM

The engine bay is being wetsanded and buffed now and it's looking incredible. The rear subframe is cleaned up and installed and the front subframe will go in tomorrow. All that is left is the body to be wetsanded/buffed, the cargo bay will sprayed in the safari gold, the tail panel to be sprayed the trim color and the body panels/door rubber and T top seals to be installed. I am hoping it will be towed to my friends house on Sunday but might be a stretch.

https://live.staticflickr.com/65535/49677603346_c085a71092_b.jpg

https://live.staticflickr.com/65535/49677884887_ba471f3d1e_b.jpg

https://live.staticflickr.com/65535/49677603661_7151755de8_b.jpg

https://live.staticflickr.com/65535/49677886097_c8b585e61f_b.jpg

https://live.staticflickr.com/65535/49677886262_16f9cfd695_b.jpg

https://live.staticflickr.com/65535/49677604266_ec26f4b3ba_b.jpg

https://live.staticflickr.com/65535/49677603071_f7e678a82a_b.jpg

https://live.staticflickr.com/65535/49677604406_a3f0c7cd07_b.jpg

https://live.staticflickr.com/65535/49677072898_8d9e2a7cf2_b.jpg

https://live.staticflickr.com/65535/49677604646_4c550e5147_b.jpg

https://live.staticflickr.com/65535/49677604756_51752eb6e8_b.jpg

https://live.staticflickr.com/65535/49677604871_a0f0db36ba_b.jpg

https://live.staticflickr.com/65535/49677605061_2dae1c1a7f_b.jpg

https://live.staticflickr.com/65535/49677887262_c5885b73de_b.jpg

https://live.staticflickr.com/65535/49677071578_e94229046d_b.jpg

RVAE34

03-20-2020, 01:59 PM

These photos don't do it justice. He wetsanded and polished the entire bay and it looks better than most cars exteriors. It will be a full roller soon and will be done between Sunday-Wednesday. Yes, I know the camber plates are rotated 90 degrees. He thought the bolt pattern wasn't symetrical.

https://live.staticflickr.com/65535/49679871423_5aa987075a_b.jpg

https://live.staticflickr.com/65535/49680404061_565aa5b681_b.jpg

https://live.staticflickr.com/65535/49679871863_2d7a11590e_b.jpg

https://live.staticflickr.com/65535/49680404416_7a22cf3133_b.jpg

https://live.staticflickr.com/65535/49679872243_a0ef941ba3_b.jpg

https://live.staticflickr.com/65535/49680695652_8255cdf48d_b.jpg

https://live.staticflickr.com/65535/49680404936_01a9804e5d_b.jpg

https://live.staticflickr.com/65535/49680695937_832d773ff3_b.jpg

https://live.staticflickr.com/65535/49679872828_2175cb8b0b_b.jpg

https://live.staticflickr.com/65535/49679872988_8e2e191d8a_b.jpg

https://live.staticflickr.com/65535/49679873158_c20abd499f_b.jpg

https://live.staticflickr.com/65535/49679873353_637af74a50_b.jpg

https://live.staticflickr.com/65535/49680696812_9074f7c7ac_b.jpg

https://live.staticflickr.com/65535/49680696962_36219c3fc4_b.jpg

https://live.staticflickr.com/65535/49680697057_52d643d7bb_b.jpg

https://live.staticflickr.com/65535/49680697162_d419f4d52e_b.jpg

https://live.staticflickr.com/65535/49679873958_e9f8dc881a_b.jpg

https://live.staticflickr.com/65535/49680697402_c4cc9ebbf3_b.jpg

TheRealSy90

03-20-2020, 04:39 PM

Not being nit picky just out of a pure safety standpoint;

It looks like your double-adjusters on the rear suspension arms aren't adjusted properly, from what I can see it seems one side of each adjuster is fully threaded in, while the other half is outward. They should be "equally" adjusted, as in set them fully shortened and use the center nut to adjust longer so that both threads (standard and reversed) extend equally.

Or i'm seeing it wrong, just noticed the center adjust nut is touching the arm on most of them.

RVAE34

03-20-2020, 05:45 PM

Nothing is even remotely adjusted properly yet. It's a long way from getting the suspension set up. I'll get it close with the string method getting equal lengths before being towed to an alignment shop. Probably 2-3 months from now.

RVAE34

03-24-2020, 05:51 AM

Last of the color. Comes home today!

https://live.staticflickr.com/65535/49691888218_e047818539_b.jpg

Bluejayde

03-24-2020, 10:56 AM

This is my favorite thread right now. Quality work on an under-appreciated chassis. Show em what's possible!

RVAE34

03-25-2020, 05:46 PM

Huge compliment, thank you!

Tail panel painted matte pewter to match all the trim and spoilers. The car and most of the hood is wetsanded and will all be final buffed tomorrow.

https://live.staticflickr.com/65535/49698147448_bb4b8cfdc1_b.jpg

https://live.staticflickr.com/65535/49698986322_339eca4d23_b.jpg

https://live.staticflickr.com/65535/49698149093_818cf6394c_b.jpg

https://live.staticflickr.com/65535/49698680581_824384c464_b.jpg

https://live.staticflickr.com/65535/49698680386_6d6ca033cf_b.jpg

https://live.staticflickr.com/65535/49698680181_773eaa075e_b.jpg

https://live.staticflickr.com/65535/49698148288_c351203432_b.jpg

https://live.staticflickr.com/65535/49698986637_41a11568ec_b.jpg

https://live.staticflickr.com/65535/49698986447_47bb3b4a09_b.jpg

RVAE34

03-26-2020, 08:05 PM

Ready to begin wiring, engine and trans install at my good friends before it comes back to my house for final assembly.

https://live.staticflickr.com/65535/49702833751_971a1dde47_b.jpg

https://live.staticflickr.com/65535/49703149497_f13e6b128a_b.jpg

https://live.staticflickr.com/65535/49703149562_b48de6e053_b.jpg

https://live.staticflickr.com/65535/49702302618_c05c99289f_b.jpg

https://live.staticflickr.com/65535/49703149762_7e59283101_b.jpg

https://live.staticflickr.com/65535/49702302793_34aa78a2d9_b.jpg

https://live.staticflickr.com/65535/49702834091_4970bb4362_b.jpg

https://live.staticflickr.com/65535/49702302963_8f9227941f_b.jpg

https://live.staticflickr.com/65535/49703150107_ed08131aab_b.jpg

RVAE34

04-03-2020, 07:15 PM

http://www.superstreetonline.com/features/1984-nissan-skyline-hr30

future

04-03-2020, 09:11 PM

Do they still make a printed copy?

RVAE34

04-15-2020, 06:06 AM

No, just digital now.

Sectioned, shortened and shaved rear bumper put on the car for the first time. Will take some tweaking to get the gaps just right but I had to just get it loosely bolted to the car to see it. Fuel rail, injectors and power steering pump are on the car and I had to order a few extra pieces. Haltech oil pressure, fuel pressure and ECU coolant temp sensors. The first test velocity stack was also made but they are refining the release process as it broke coming out of the mold. They are practicing with carbon before switching to kevlar.

https://live.staticflickr.com/65535/49771072516_c8c76b2bfa_b.jpg

https://live.staticflickr.com/65535/49771397292_4836432efc_b.jpg

https://live.staticflickr.com/65535/49770539373_4b3e63bd92_b.jpg

https://live.staticflickr.com/65535/49771072301_432e655dae_b.jpg

https://live.staticflickr.com/65535/49771072181_7cbeaafd8b_b.jpg

https://live.staticflickr.com/65535/49771396862_57d7d270f1_b.jpg

https://live.staticflickr.com/65535/49770538713_87acb12fff_b.jpg

https://live.staticflickr.com/65535/49771071736_6b2fbdd6f3_b.jpg

https://live.staticflickr.com/65535/49771396487_fdf4e3a8d1_b.jpg

https://live.staticflickr.com/65535/49771396332_375697eb3d_b.jpg

https://live.staticflickr.com/65535/49770538138_304e716223_b.jpg

https://live.staticflickr.com/65535/49771397777_7565d276c8_b.jpg

https://live.staticflickr.com/65535/49771397677_12a72710e5_b.jpg

https://live.staticflickr.com/65535/49770539648_538af5b511_b.jpg

https://live.staticflickr.com/65535/49771072611_4dc15dc6e1_b.jpg

https://live.staticflickr.com/65535/49760598671_13729763c2_b.jpg

https://live.staticflickr.com/65535/49760897742_f0c477fd73_b.jpg

https://live.staticflickr.com/65535/49760917777_aa23db1e31_b.jpg

IIIXziuR

04-15-2020, 11:49 AM

Fantastic. Nice to see it all in the safari gold color. It came out superb.

future

04-16-2020, 05:15 AM

Omg omg omg

Thursday7

04-16-2020, 06:33 AM

I see them NOS T-Tops in place:cool:

Slideurmom

04-18-2020, 01:12 PM

ugh so much goodness

RVAE34

04-26-2020, 09:48 PM

Still waiting on the engine mounts from Japan but the engine is getting really close to being complete. Just waiting on the Ross water pulley to arrive along with the LS alternator kit then I just need an alternator and starter and that's about it. I have a tinted acrylic Watanabe oil cap on the way too. The next photos are of a Nissan D21 hardbody speedometer sensor which fits the NOS R34 5 speed transmission since the Skyline uses an electronic speedo and the Z31 uses a cable. I will just need to figure out the correct gear once the car is driveable. Lastly, my R30 parked next to a JDM Supra at my friends house and then a night shot I took of the 30 as well.

https://live.staticflickr.com/65535/49822878318_1a19791b22_b.jpg

https://live.staticflickr.com/65535/49823407041_3504b5f0c1_b.jpg

https://live.staticflickr.com/65535/49823407201_2843d0b26a_b.jpg

https://live.staticflickr.com/65535/49822877038_245bc5f782_b.jpg

https://live.staticflickr.com/65535/49822877223_99d86a07dd_b.jpg

https://live.staticflickr.com/65535/49822877378_3ffe32d1e1_b.jpg

https://live.staticflickr.com/65535/49822877748_87ac8edc07_b.jpg

https://live.staticflickr.com/65535/49822878608_d35b8f62d0_b.jpg

https://live.staticflickr.com/65535/49822879073_ddf81f3c0f_b.jpg

https://live.staticflickr.com/65535/49823729637_4b115e1419_b.jpg

https://live.staticflickr.com/65535/49823409541_f03c37164a_b.jpg

https://live.staticflickr.com/65535/49823729987_74149f4eb3_b.jpg

https://live.staticflickr.com/65535/49823409786_ec1750dab7_b.jpg

https://live.staticflickr.com/65535/49823409876_7894fa2a98_b.jpg

https://live.staticflickr.com/65535/49823426726_854c1a1824_b.jpg

https://live.staticflickr.com/65535/49822879818_85fcaff6c6_b.jpg

https://live.staticflickr.com/65535/49823410081_6161f2ca45_b.jpg

https://live.staticflickr.com/65535/49822879898_0c77118671_b.jpg

https://live.staticflickr.com/65535/49822876233_3d6140a3b6_b.jpg

https://live.staticflickr.com/65535/49817355448_73134053d3_b.jpg

coupesallday!

05-04-2020, 10:29 PM

Sorry if I missed it, but are you running a a rear sway bar?

da_crew10

05-05-2020, 09:52 PM

I thought basketball season was over lol. You baller.

RVAE34

05-08-2020, 01:57 PM

I will be. I haven't gotten the sway bars or strut towers yet.

Some minor z31 updates as I am still waiting for engine brackets from Japan.

My intake manifold, vacuum tube, throttle bodies, water necks and windshield wiper motor parts are at a specialist who restores GT-R parts using vapor blasting and then puts a corrosion resitant material over the bare aluminum. He is making it all look factory new and replacing all hardware with yellow cad. He shaved off the bosses from the vacuum tube that are used to mount the stock wiring harness case since we are doing a full wire tuck. It looks so much better without these and he re-textured the aluminum by hand to make it look stock. He shaved off the casting marks too. Mine is on the right and original is left. The last photos are of the guys restored parts. Looks factory fresh.

The guy doing my velocity stacks made a test one in carbon but he wasn't happy with the outer finish so he made a billet mold for the outer too so it will be 100% perfect. Cannot wait to see the kevlar velocity stacks!

I also took my R30 to Driver Motorsports for the day. They are doing some youtube videos. They also put it on the dyno.

https://live.staticflickr.com/65535/49870115063_900eb2c63b_b.jpg

https://live.staticflickr.com/65535/49870115073_4bfe761c17_b.jpg

https://live.staticflickr.com/65535/49870648001_f155d20cdd_b.jpg

https://live.staticflickr.com/65535/49871156512_9010d84d78_b.jpg

https://live.staticflickr.com/65535/49869550838_85248f75db_b.jpg

https://live.staticflickr.com/65535/49870390872_34cfc22718_b.jpg

https://live.staticflickr.com/65535/49870083786_69726f42c9_b.jpg

https://live.staticflickr.com/65535/49870318063_a600f76d49_b.jpg

https://live.staticflickr.com/65535/49870848851_f011f7f89f_b.jpg

https://live.staticflickr.com/65535/49871156432_b8cfbc7192_b.jpg

https://live.staticflickr.com/65535/49871156507_b779f518cf_b.jpg

https://live.staticflickr.com/65535/49858517383_d2bb0d6ebb_b.jpg

https://live.staticflickr.com/65535/49859052721_7ac9dedff1_b.jpg

https://live.staticflickr.com/65535/49856817746_1f6be94c0b_b.jpg

https://live.staticflickr.com/65535/49856277008_54714d18c9_b.jpg

https://live.staticflickr.com/65535/49856278223_dc5a9c2617_b.jpg

https://live.staticflickr.com/65535/49856278278_36a035365d_b.jpg

https://live.staticflickr.com/65535/49852618102_df5be06e5b_b.jpg

https://live.staticflickr.com/65535/49851783248_c037e96336_b.jpg

https://live.staticflickr.com/65535/49856276668_5d9045c591_b.jpg

https://youtu.be/uB3wtdGY5Ks

IIIXziuR

05-12-2020, 09:26 AM

Wow. Those restored aluminum parts look so good. Fantastic work.
Love your color selection on your cars.

k00laid83

05-15-2020, 09:13 AM

I'm loving this build! Plus the safari gold looks so good on cars that it never came on. I actually just picked up a pint to shoot my Legacy GT engine bay before I drop in the engine. Great job man! Inspirational to say the least!

future

05-15-2020, 09:39 AM

That RB26.......drip drip

RVAE34

05-15-2020, 10:45 AM

Thank you!!

Wiper motor restoration under way. Just awaiting the plated parts now. Also, test kevlar velocity stack #3. He has figured out all the issues and the next one will be the final product.

https://live.staticflickr.com/65535/49894699403_65f4e365b8_b.jpg

https://live.staticflickr.com/65535/49895213626_6513c903fe_b.jpg

https://live.staticflickr.com/65535/49894699553_1aae0be97c_b.jpg

https://live.staticflickr.com/65535/49895214171_0d3a588366_o.jpg

https://live.staticflickr.com/65535/49895214176_81f78dba78_o.jpg

https://live.staticflickr.com/65535/49895215111_283ae22622_b.jpg

https://live.staticflickr.com/65535/49894700763_47dc1c9bf2_b.jpg

https://live.staticflickr.com/65535/49897689878_6f0ff38ffe_b.jpg

https://live.staticflickr.com/65535/49898205321_f5884c7b78_o.jpg

https://live.staticflickr.com/65535/49898205326_2d14fb747a_o.jpg

https://live.staticflickr.com/65535/49898205436_370949cb58_o.jpg

future

05-15-2020, 12:41 PM

Wow! The before and after of that part your holding (idk what it is or made of lol) is crazy!

RVAE34

05-15-2020, 12:50 PM

The wiper motor housing? Aluminum. That original photo was after I soaked it in degreaser over night too. And scrubbed with a wire and tooth brush. Then I had it along with all my aluminum engine parts vapor blasted and treated with a corrosion inhibitor. Wait until I post how my throttle bodies came out!

future

05-17-2020, 12:44 AM

No that carbon looking stuff

RVAE34

05-17-2020, 12:11 PM

Oh, that's carbon/kevlar.

RVAE34

05-18-2020, 10:58 AM

Unfortunately, I ran into a slight issue with my engine build. I realized that since my block was for a head with hydraulic lifters, it would create an issue with overfilling the head with oil so it's at the machinist getting the head pulled back off to block off the rear oil feed and having the front one stepped down a tiny bit. Shame this came to light so late. Sucks that this happened but better now than when in the car. Could have been catastrophic too! Luckily the head and bottom end can remain assembled and just has to have the head removed. Ordered a new HG just in case too.

My brackets finally shipped from Japan too so they should be here in a week or so. The engine will be back from the machinist this weekend.

RVAE34

05-21-2020, 10:07 PM

Got the engine brackets and the engine itself is ready for pickup!

While awaiting the install, some new photos I took of the R30. And a dyno video.

Also, throwing in some photos of the daily since it's pretty much done now. Just need a winch but that is on hold while I finish the Z.

https://live.staticflickr.com/65535/49921712812_bbe7a25a30_b.jpg

https://live.staticflickr.com/65535/49920894828_24bba32e23_b.jpg

https://live.staticflickr.com/65535/49920895043_ab774ea7e1_b.jpg

https://live.staticflickr.com/65535/49921713547_992d67e781_b.jpg

https://live.staticflickr.com/65535/49920895273_a295f37c9f_b.jpg

https://live.staticflickr.com/65535/49920895903_3b0f37e0a9_b.jpg

https://live.staticflickr.com/65535/49921714402_98f8eddf74_b.jpg

https://live.staticflickr.com/65535/49921412246_cc3737faf7_b.jpg

https://live.staticflickr.com/65535/49921153086_c8dd647a76_b.jpg

https://live.staticflickr.com/65535/49921153836_81932f6510_b.jpg

https://live.staticflickr.com/65535/49921153981_7fe3eb40fe_b.jpg

https://live.staticflickr.com/65535/49920638518_1852526204_b.jpg

https://live.staticflickr.com/65535/49921455452_8667fef956_b.jpg

https://live.staticflickr.com/65535/49920640568_60b3be6d12_b.jpg

https://live.staticflickr.com/65535/49921455757_9b51730efb_b.jpg

https://live.staticflickr.com/65535/49920640898_7018295a18_b.jpg

https://live.staticflickr.com/65535/49920636853_4e95221413_b.jpg

https://live.staticflickr.com/65535/49920636703_023d55631d_b.jpg

https://live.staticflickr.com/65535/49916617753_5b0ed45c99_b.jpg

https://live.staticflickr.com/65535/49916616198_eb467ac20b_b.jpg

https://live.staticflickr.com/65535/49917130276_520022856e_b.jpg

https://live.staticflickr.com/65535/49917430752_7f7964462e_b.jpg

https://live.staticflickr.com/65535/49916615848_eb93989447_b.jpg

https://live.staticflickr.com/65535/49916742398_9be7716731_b.jpg

https://live.staticflickr.com/65535/49918399962_3d6d44c5b8_b.jpg

https://www.youtube.com/watch?v=FTn6O4CKCT0&t=4s

lonewanderer

05-22-2020, 11:19 AM

odd question, but what do you do for work and are they hiring... lol need this kind of paper in my life

RVAE34

05-22-2020, 11:31 AM

Haha, financial advisor and yes but it took many years of hard work making almost nothing before I started making good money.

RVAE34

05-23-2020, 04:37 PM

https://www.youtube.com/watch?v=ncNmgrO_8uQ&t=13s

RVAE34

05-23-2020, 10:02 PM

Not sure if that is working correctly but here are the youtube links.

https://www.youtube.com/watch?v=ncNmgrO_8uQ&list=UUzmJRqxCc_F1Fd8iw4gofuA&index=2&t=30s

https://www.youtube.com/watch?v=FTn6O4CKCT0

RVAE34

05-25-2020, 04:24 PM

All my intake parts, vaccum rail, water necks and wiper motor housing have been restored and holy $hit! He also removed the bosses off the top of the vacuum rail that the stock harness case mounted too since everything will be tucked. Then he re-textured. All aluminum was vapor blasted and coated with corrosion inhibitor, all re-plated hardware, OEM sticker and factory paint/QC marks. It's incredible!

First photo is how they looked when I got them. And remember, the ITB's were bored to 48mm and the intake manifold was port matched to the ITB's and head work.

https://live.staticflickr.com/4633/38590219504_65d29ea00c_b.jpg

https://live.staticflickr.com/65535/49935032463_8214ff0481_b.jpg

https://live.staticflickr.com/65535/49935847587_99bb0aaee0_b.jpg

https://live.staticflickr.com/65535/49935847737_5648084b12_b.jpg

https://live.staticflickr.com/65535/49935032578_4778e7778d_b.jpg

https://live.staticflickr.com/65535/49935545196_dbd4a9a910_b.jpg

https://live.staticflickr.com/65535/49935032668_4f00f36018_b.jpg

https://live.staticflickr.com/65535/49935847922_5ba12c59d2_b.jpg

https://live.staticflickr.com/65535/49935847927_659839a36b_b.jpg

https://live.staticflickr.com/65535/49935545416_6f6250d22c_b.jpg

https://live.staticflickr.com/65535/49935545481_ace6563d73_b.jpg

https://live.staticflickr.com/65535/49935545556_52580b8836_b.jpg

https://live.staticflickr.com/65535/49935545621_02db150ed2_b.jpg

https://live.staticflickr.com/65535/49935033183_a2562ccea2_b.jpg

https://live.staticflickr.com/65535/49935033208_ba2d5a46c7_b.jpg

IIIXziuR

05-27-2020, 09:17 AM

Man, that is wild. Even better than brand new!
Hats off for attention to detail.

RVAE34

05-30-2020, 11:40 AM

Everything matters on this build so even the wiper motor is getting restored. The intake parts came out incredible.

https://live.staticflickr.com/65535/49951911023_ab0d18e479_b.jpg

https://live.staticflickr.com/65535/49951911078_b0d1a1605c_b.jpg

https://live.staticflickr.com/65535/49952683387_b1f2e359ca_b.jpg

https://live.staticflickr.com/65535/49952393486_c1aa75c43e_b.jpg

https://live.staticflickr.com/65535/49952683272_a68950e8ff_b.jpg

https://live.staticflickr.com/65535/49952393116_e533ac9537_b.jpg

https://live.staticflickr.com/65535/49952682967_27371d78fd_b.jpg

https://live.staticflickr.com/65535/49951893288_3b04239b82_b.jpg

https://live.staticflickr.com/65535/49951893223_cfc4a75a0c_b.jpg

https://live.staticflickr.com/65535/49951893108_384372021a_b.jpg

https://live.staticflickr.com/65535/49952392456_5607ed9652_b.jpg

feito

05-31-2020, 08:55 PM

what company's doing the restoration on the small parts like the throttle bodies and what's the cost for those services? Also, what is the black stuff around the throttle body plates?

Dolph_KYAS13

06-01-2020, 07:31 AM

what company's doing the restoration on the small parts like the throttle bodies and what's the cost for those services? Also, what is the black stuff around the throttle body plates?

Black stuff is sealer. Big problem is when people try and clean up Rb26 throttle bodies, they wipe all this away and then it never runs right afterwards.

This refresh is so proper :)

RVAE34

06-01-2020, 10:14 AM

Remade in the USA did all the restoration but EFI hardware in Australia did the boring and re-building of the ITB's along with the throttle seal paint before Remade restored the outer housings and re-plated all the hardware.

TheRealSy90

06-01-2020, 05:17 PM

what company's doing the restoration on the small parts like the throttle bodies and what's the cost for those services? Also, what is the black stuff around the throttle body plates?

That's sealant for the throttle blade that every kid removes from their throttle body when they "clean" it and then it has a vacuum leak.

RVAE34

06-01-2020, 09:52 PM

Got a lot of work done but didn't have enough time to get it in the car today. Swapped out all the front incorrect hardware with the proper fasteners, modified the front heater hose port to go straight back instead of out, swapped the clutch mechanism in the trans from pull type to push type, drilled and tapped for new slave cylinder location, drilled the plug out for the rear sump dipstick tube, installed the pilot bushing, flywheel and clutch along with the transmission. We have decided to put the crossmember on the engine and then put everything in from the bottom.

https://live.staticflickr.com/65535/49961934346_b5a5b0a4e5_b.jpg

https://live.staticflickr.com/65535/49962216632_a3801292bf_b.jpg

https://live.staticflickr.com/65535/49961429528_24483070db_b.jpg

https://live.staticflickr.com/65535/49961933761_14717248b9_b.jpg

https://live.staticflickr.com/65535/49961933506_1fc42bf298_b.jpg

https://live.staticflickr.com/65535/49961427588_1c03eea7f6_b.jpg

https://live.staticflickr.com/65535/49962216092_d406fae6fd_b.jpg

https://live.staticflickr.com/65535/49962216037_46c178584b_b.jpg

https://live.staticflickr.com/65535/49961933151_1392f1da0a_b.jpg

https://live.staticflickr.com/65535/49962215697_58b25d16a9_b.jpg

https://live.staticflickr.com/65535/49961933076_79acafffab_b.jpg

https://live.staticflickr.com/65535/49961428118_5d6d8e121e_b.jpg

https://live.staticflickr.com/65535/49962215187_905474930d_b.jpg

https://live.staticflickr.com/65535/49962215372_d0e5a20d39_b.jpg

https://live.staticflickr.com/65535/49961427798_48dce5b733_b.jpg

https://live.staticflickr.com/65535/49961427448_e2302847e3_b.jpg

RVAE34

06-08-2020, 09:39 AM

Turns out the NA 300zx crossmember doesn't work :( I thought I checked the part numbers and they were the same with NA 300 and a ZR. I have found a full ZR drivetrain in Japan that I am trying to buy though and then will have my guys there strip all the parts I want off and trash the engine/trans etc.

We did install all of the accessories and only the starter is left. It looks so good! Coffee table worthy.

https://live.staticflickr.com/65535/49982182462_343f597f59_b.jpg

https://live.staticflickr.com/65535/49981401273_ecb7d49586_b.jpg

https://live.staticflickr.com/65535/49981926221_aa5a56e638_b.jpg

https://live.staticflickr.com/65535/49982182107_3419f5e206_b.jpg

https://live.staticflickr.com/65535/49981925896_4acc6381ef_b.jpg

https://live.staticflickr.com/65535/49981400808_e476fe0d9c_b.jpg

https://live.staticflickr.com/65535/49981400658_e0b280cfaf_b.jpg

https://live.staticflickr.com/65535/49982142616_feb065b661_b.jpg