Parts needed to complete 5 speed swap

[hyde097]

5 speed swapping my S14. Got a trans, shifter, and master/slave/hard line assembly. What do I need to complete the swap? Never done anything like this and I barely know how to drive a manual so know very little about what’s needed to complete the conversion. All I know is that I don’t have a clutch fork or clutch assembly/pedal. Any info is helpful.

Thanks.

[240sxScores]

You'll need a manual trans cross member. Might need a 5 spd driveshaft too. There should be a swap guide somewhere on the internet for this.

[brndck]

wow, is today national "I can't use google on my own" day?
http://lmgtfy.com/?q=240sx+5+speed+swap

[JustinChillenBallin]

wow, is today national "I can't use google on my own" day?
http://lmgtfy.com/?q=240sx+5+speed+swap

he's from Kentucky, cut him some slack!

[drifter5]

Just did mine last year on a '95 S14.

Looks like you're still missing...
-Driveshaft
-Pressure Plate Bolts
-Clutch + Pressure Plate
-Flywheel
-Flywheel bolts
-Dust Cover
-Bell housing bolts
-5 Speed brake pedal (or you can cut your existing one)

Also make sure you get an S14 transmission otherwise if you use an S13, you will have to drill a hole for the CAS and figure out the wiring required for the speed sensor.

I also swapped ECU on mine to a 95 5-speed to get rid of the CEL.