blades13.5
12-27-2017, 07:47 PM
Have a Z32 fully disassembled and parts ready to go. Need to have everything gone by the end of the month or the parts will be crushed/gone. Cheaaap Cheeaaap Cheeap. Located In Antioch. Shipping not included. Will take trades.
Rotors. 75% Good thickness $20
Front hubs (5 lug) (they have the speed sensors and lug in the back though so I’m not sure if they will work on an Schassis as they seem to fit in the front knuckles. $40
Front and rear lower control arms. $35
Upper control arms $30
Intake Plenum $50
Alternator $75
Ac compressor $50
Power steering pump and bracket $60
Differential (helical) $100
Front and rear knuckles $50
Rear hatch with glass $50
Headlights $225
Doors $100, $150 for both
Dash $50
Blower motor and any of that bullshit $20 for whatever idc.
Downpipes with cats $60
Brake hardlines $40
Clutch pedal $45
Clutch master $30
Engine block $100 Plenum not included. (There’s a hole in the oil pan) (Doesn’t include belt driven accessories or electronic accessories)
Radiator $20
Fuel pump $75
Front tension bars. $20 (From LCAs to chassis)
Ebrake handle $15
Rear quarter Side windows $45
KYB Front upgraded shocks $50
Rear shocks (OEM) $30
T-Tops $100
ABS module $20
Front passenger Fender $60
Set of OEM wheels and tires (Good tread) $100
2 piece Driveshaft (carrier bearing is good) $60
Resivoirs $20 a piece
Hood $20 (dented. Clear coats coming off. Hood hinges straight)
Taillights (3 pieces) $80
Bash bar $25
Manual ECU $50
Brake pedal $40
Injectors and fuel rails $80
Throttle bodies $75
Digital climate control $40
Tach Unit $20
Rear bumper (blue) $30
Front and rear sway bar $40 for both
Wiper motors with arms $40
All the trim $30
Fuel tank $50
Inquire for anything else!
————————————————†”————————
SOLD
Calipers
Transmission
Axles
Ebrake assembly
Shift boot and dust covers
Seats
PTU
Crank angle sensor
MAF
Cat back exhaust
Rear hubs
Gas covers
Steering wheel
Steering rack
Windshield
Radio antennae and motor
Rotors. 75% Good thickness $20
Front hubs (5 lug) (they have the speed sensors and lug in the back though so I’m not sure if they will work on an Schassis as they seem to fit in the front knuckles. $40
Front and rear lower control arms. $35
Upper control arms $30
Intake Plenum $50
Alternator $75
Ac compressor $50
Power steering pump and bracket $60
Differential (helical) $100
Front and rear knuckles $50
Rear hatch with glass $50
Headlights $225
Doors $100, $150 for both
Dash $50
Blower motor and any of that bullshit $20 for whatever idc.
Downpipes with cats $60
Brake hardlines $40
Clutch pedal $45
Clutch master $30
Engine block $100 Plenum not included. (There’s a hole in the oil pan) (Doesn’t include belt driven accessories or electronic accessories)
Radiator $20
Fuel pump $75
Front tension bars. $20 (From LCAs to chassis)
Ebrake handle $15
Rear quarter Side windows $45
KYB Front upgraded shocks $50
Rear shocks (OEM) $30
T-Tops $100
ABS module $20
Front passenger Fender $60
Set of OEM wheels and tires (Good tread) $100
2 piece Driveshaft (carrier bearing is good) $60
Resivoirs $20 a piece
Hood $20 (dented. Clear coats coming off. Hood hinges straight)
Taillights (3 pieces) $80
Bash bar $25
Manual ECU $50
Brake pedal $40
Injectors and fuel rails $80
Throttle bodies $75
Digital climate control $40
Tach Unit $20
Rear bumper (blue) $30
Front and rear sway bar $40 for both
Wiper motors with arms $40
All the trim $30
Fuel tank $50
Inquire for anything else!
————————————————†”————————
SOLD
Calipers
Transmission
Axles
Ebrake assembly
Shift boot and dust covers
Seats
PTU
Crank angle sensor
MAF
Cat back exhaust
Rear hubs
Gas covers
Steering wheel
Steering rack
Windshield
Radio antennae and motor