PDA

View Full Version : Controller installed correctly?


zenkirps13
10-24-2004, 12:20 PM
Yesterday me and my friends installed a Greddy Profec B boost controller on an sr20 redtop, but because of my custom intercooler piping we had to mickey mouse where the solenoid got its pressure readings from. There was no spigot to fit the vaccum line on the charge piping, so we teed it to the bov vaccum line, the shops we called (the few that were open saturdays) said that any place after the turbo would work for the pressure reading. But I am still unsure of this b/c adjusting the low boost setting is very sensitive, and the high boost barely moves at all and sometimes doesnt go above .5 bar. Any help would be appreciated, and also there seems to be a light permanatly on in the boost controller even though we soldered it to an ignition switched source...weird.