S14/13 pbm knuckles, sr20 maf intake and more

[Jnev7]

*all prices do not include shipping and PayPal fees*
-I am open to offers on most items-
All are either fresh off my old build, or have been sitting for a little bit will work[emoji1360]

*contact me at (9two5)550six683, fast response to make deal, texts have priority.
Don’t panic if I don’t respond right away. I work 2300-0700 pst. So sleep 0800-1630

S14 parts by max knuckles. They will work on s13 you just need s14 hubs, and sometimes bore out coilover holes. Used 3 track events, practically new. Cost $400 + tax and shipping new, save a little and buy mine for $sold

S14 Sr20det tomei procam solid lifter 270duration. Was told you can use it on s13 but need adjustable sprocket. Not 100 on that tho. $150

S13 Sr20det oem intake, with maf/maf adapter/ pod filter/ mounting bracket. $sold

Single din gauge holder for 52mm gauges. Worked grate on my s13. $25

S14 oem knuckles and lower control arms and 5 lug hubs. Great for s13 5 lug conversions. $sold
Z32 rear hub assembly for s13 5 lug conversion $sold
Whole set for $sold

Z32 rear aluminum knuckles. Use on s13/14 for light weight knuckles. Just need z32 mounting on your coil over $45





https://uploads.tapatalk-cdn.com/20171109/070d95187917039292d0df082142887f.jpg

https://uploads.tapatalk-cdn.com/20171109/9d2a5fce5616c843f7262c02352e0f1c.jpg
https://uploads.tapatalk-cdn.com/20171109/f795a771b845dd7b6731f20b0388ebdb.jpg

https://uploads.tapatalk-cdn.com/20171109/6f1e7b305cdf1b615ad40e1194a7235e.jpg
https://uploads.tapatalk-cdn.com/20171109/00529f66629ddf0db3f89ecef71d3c51.jpg
https://uploads.tapatalk-cdn.com/20171109/34674efa7f433e6ed0ad50fec5cc5547.jpg
https://uploads.tapatalk-cdn.com/20171109/480a31f422ff415453353bb20f3de11a.jpg

https://uploads.tapatalk-cdn.com/20171109/6b98ecd5a4bef96eba1e328af19f52a8.jpg
https://uploads.tapatalk-cdn.com/20171109/b9d8185e5a7978f47cf4eca0f773726b.jpg
https://uploads.tapatalk-cdn.com/20171109/e45c7dc9a918e50d95e830dae7d9beef.jpg
https://uploads.tapatalk-cdn.com/20171109/ab47f149e6fca7c9e9146ff43e0b3a62.jpg
https://uploads.tapatalk-cdn.com/20171109/15bb21ca06edd5cc511ca9a55c83e4bc.jpg


Sent from my iPhone using Tapatalk

[lgsr20swap]

Tried to pm u. I want knuckle. Shipped to 06512 please


Sent from my iPhone using Tapatalk

[Jnev7]

Text me at number above


Sent from my iPhone using Tapatalk

[Jnev7]

5 lug swap sold


Sent from my iPhone using Tapatalk

[Jnev7]

Up. Someone has to want these Pbm knuckles. Text me an offer people


Sent from my iPhone using Tapatalk

[Jnev7]

Up


Sent from my iPhone using Tapatalk

[Jnev7]

Text me an offer, worst I can say is no


Sent from my iPhone using Tapatalk

[afishysilvia]

Does gauge holder work for s14

[Jnev7]

Does gauge holder work for s14



Yes


Sent from my iPhone using Tapatalk

[Jnev7]

Up to top


Sent from my iPhone using Tapatalk

[red_240]

One more thing to consider if putting these on a s13 is that ball joint taper will be different. You will need to press s14 ball joints into your control arm or use s14 lowers I run s13 PBM knuckles on my s14.

[Jnev7]

No offers?


Sent from my iPhone using Tapatalk

[Jnev7]

One more thing to consider if putting these on a s13 is that ball joint taper will be different. You will need to press s14 ball joints into your control arm or use s14 lowers I run s13 PBM knuckles on my s14.



Yes you are correct. I personally believe s14 on s13 are better in all aspects. All joints are thicker and stronger.... to bad no one is fallowing through with this deal


Sent from my iPhone using Tapatalk

[Jnev7]

To the top.
*also have a oem Sr20det drive shaft


Sent from my iPhone using Tapatalk

[Jnev7]

Knuckles sold


Sent from my iPhone using Tapatalk