Jnt82
09-14-2017, 01:08 PM
New items added regularly
PayPal / cash when local
Shipped w/ tracking UPS or USPS
2 piece drive shaft - $140 Shipped
S13
Manual
Non-ABS
recently installed Carrier bearing
100807
100808
100809
100810
Speed Sensor $150 Shipped
S13
Manual
21 tooth gear included
Great condition
Very Clean
Replaced the strain relief at the base of the unit and the connector
No leaks from the o-ring
Connector still has its internal gasket
Stain Relief zip-tie attached the the connectors body is still in great condition, not broken or brittle
more pics available if needed
100811
*SOLD*Climate Control - $75 Shipped *SOLD*
No problems other than a tiny bit of that weird plastic oxidation on top of the slider controls
100812
100813
Remanufactured Blower Motor $30??? OBO? +shipping
S13
Tested but never installed
100814
100815
**SOLD** TXS KnockLite -$75 shipped
Used it for tuning, works great
Can also be used as a shift light
instructions included
I have included a pigtail and t-tap wire splices to aid/simplify installation
100862
100863
S13 Manual Transmission $300 - Picked up
All sensors included,
Partial lower harness
shifter included
100902
DIY adjustable cam gear alignment aid $35 OBO
cast from a JWT cam gear
--Tools needed--
Appropriate center punch and drill bit
Gear seen in picture included
The insert itself is made from a urethane resin so save yourself a lot of hassle and just drill the ones you need.
100903
Cold Side Blow thru setup $300 OBO
Ran perfectly, no more stumbles or stalls, VTA setups are so much better for ease of tube routing, engine bay real estate and mainly idle issues.
All aluminum tubes have rolled beads
Z32 MAFS - included inside the aluminum housing
routing path
https://i.imgur.com/0U07cgx.jpg
https://i.imgur.com/X7lJAOq.jpg
https://i.imgur.com/ebXrK6U.jpg
https://i.imgur.com/P70LA2G.jpg
OE S13 Tension Rods w/ Energy Suspension bushings $30 +shipping
https://i.imgur.com/7M2sXRN.jpg
PayPal / cash when local
Shipped w/ tracking UPS or USPS
2 piece drive shaft - $140 Shipped
S13
Manual
Non-ABS
recently installed Carrier bearing
100807
100808
100809
100810
Speed Sensor $150 Shipped
S13
Manual
21 tooth gear included
Great condition
Very Clean
Replaced the strain relief at the base of the unit and the connector
No leaks from the o-ring
Connector still has its internal gasket
Stain Relief zip-tie attached the the connectors body is still in great condition, not broken or brittle
more pics available if needed
100811
*SOLD*Climate Control - $75 Shipped *SOLD*
No problems other than a tiny bit of that weird plastic oxidation on top of the slider controls
100812
100813
Remanufactured Blower Motor $30??? OBO? +shipping
S13
Tested but never installed
100814
100815
**SOLD** TXS KnockLite -$75 shipped
Used it for tuning, works great
Can also be used as a shift light
instructions included
I have included a pigtail and t-tap wire splices to aid/simplify installation
100862
100863
S13 Manual Transmission $300 - Picked up
All sensors included,
Partial lower harness
shifter included
100902
DIY adjustable cam gear alignment aid $35 OBO
cast from a JWT cam gear
--Tools needed--
Appropriate center punch and drill bit
Gear seen in picture included
The insert itself is made from a urethane resin so save yourself a lot of hassle and just drill the ones you need.
100903
Cold Side Blow thru setup $300 OBO
Ran perfectly, no more stumbles or stalls, VTA setups are so much better for ease of tube routing, engine bay real estate and mainly idle issues.
All aluminum tubes have rolled beads
Z32 MAFS - included inside the aluminum housing
routing path
https://i.imgur.com/0U07cgx.jpg
https://i.imgur.com/X7lJAOq.jpg
https://i.imgur.com/ebXrK6U.jpg
https://i.imgur.com/P70LA2G.jpg
OE S13 Tension Rods w/ Energy Suspension bushings $30 +shipping
https://i.imgur.com/7M2sXRN.jpg