GkTech S13 Roll Center/Angle Kit + P2M Hardened Inner Tie Rods

[Thursday7]

Gktech kit has bumpsteer and roll center correction for lowered cars, one of the only ways to correct geometry besides new knuckles. Also gives you a decent amount of angle for a budget front end setup. Wouldn't recommend use with large wheels or LCA's extended more than 15mm without camber plates. Comes with everything needed, I forgot to put the other larger tapered piece in the pic. I have the washers somewhere, if not any 14mm ID one will work. I'd recommend new nylocks, well, because they're nylocks. They're 200+ shipping from Gktech on backorder, asking $100 shipped.

http://i.imgur.com/pIUnt65.jpg
http://i.imgur.com/JStmDB4.jpg?1

Unboxed but never used P2M hardened inners with slip on spacers. Very beefy. Work great if you have threaded spacer in addition, likely won't be long enough with an extended LCA unless you use a heim outer or 89/90 maxima outers. Ask me how I know.

$40 shipped

http://i.imgur.com/RvoBkVr.jpg?1

I also have a pair of GKtech offset rack spacers I will throw in for free if you buy both at once, it would make a killer budget angle kit. One of the 16mm bolts is missing however, I'm sure you could find one from a hardware depot online or get one from gktech.

I reply pretty well to PM's

Located in 18038 or Philly, I travel between to two often if you'd wish to pick them up.

[asianleful]

Photobucket pictures don't work! :(

[Thursday7]

Photobucket pictures don't work! :(

Didn't realize that. kinda fixed it but imgur is bugging out on me and isn't actually resizing them, it only worked for one and I tried it dozens of times with the others. Sorry for the pics for giants.

[Thursday7]

bump up, these are currently on backorder! Save time and money!

[DUBSTEP]

How much shipped to Cali?

[wolf904]

GKtech is sold to me (;

[Thursday7]

All parts are sold.