MidnightGhouls
07-25-2017, 01:35 PM
Hello guys I'm new to zilvia.net! I recently purchased my first s chassis and bought a blacktop sr20. I am stumped as of now the ecu has no led for me to pull codes. And my cluster is garbage has no CEL lol. (Waiting on consult port)
Any help will be greatly appreciated!
-car will stay on with throttle
-idle is not higher when cold . (Starts as if car is already warmed up)
-idle starts dropping to the point car dies after it being in for a minute
-Maf was wired in properly with (diy auto tune) shielded wiring
-car sat for 2 years (bad gas?)
-black with yellow stripe wire on brown body harness connector (iacv power wire) does not have 12v with key on engine off.
I will be uploading video in a bit!. Thanks!
Any help will be greatly appreciated!
-car will stay on with throttle
-idle is not higher when cold . (Starts as if car is already warmed up)
-idle starts dropping to the point car dies after it being in for a minute
-Maf was wired in properly with (diy auto tune) shielded wiring
-car sat for 2 years (bad gas?)
-black with yellow stripe wire on brown body harness connector (iacv power wire) does not have 12v with key on engine off.
I will be uploading video in a bit!. Thanks!