Does the z32 maf work on a stock s13 redtop ecu ?

[zodpowercy]

hi there! Again i have another question that may sound silly for most of you but i am a bit confused.I was planning to buy a z32 maf (imitation from frsports) and an apexi 80mm intake to install it properly.(well until my turbo blew ..)

I have a stock s13 redtop with a stock ecu.If i replace my current airflow meter with the z32 maf will the car work properly(not to lean ,not too rich ) ? And without any kind of ecu tuning messing will it read larger airflow numbers so the ecu adjusts by itself ?

(The reason i am asking is because i am thinking to replace my gt25 with a s15 turbo gt2560r and wanted in the future to install a fmic and maybe some larger injectors)

[s13silvia123]

No.........................

[zodpowercy]

Thanks...:(
There goes my dream for a clean future pipe installation with the 80mm apexi intake ...

[OutlawLui]

wat


.............

[jedi03]

do rom tune and you are good with it on there!

[feito]

yes, it's plug and play. Buy everything.

[KAT-PWR]

Cars. Are. Not. Magical. Devices.
They rely on numbers, fuck the numbers up, fuck the car up....

[5280VertDET]

Buy a ROM tune, then get it re-tuned when you get the rest.

Before you ask:

Nismotronic, Nistune or RS-Enthalpy are the notable ROM tunes.

[S14kouki805]

This should be moved to small questions just saying, surprised they haven't locked this shit up

[zodpowercy]

"yes, it's plug and play. Buy everything. "

The ultimate reply ! :)

I have everything stock (exept the bov relocated to my hotpipe) so ...the mighty z32 maf is out of the question....I also hoped to buy the sweet 80mm chrome apexi intake pipe...

[jedi03]

do it an run a reduced coupler...I like that intake the best...I actually have an extra one if you need! intake...and maybe a coupler...I don't remember atm...

[zodpowercy]

It's a solution...!