Power FC: S14 Zenki D-jetro IAT sensor wiring help

[Kriskouki]

Hi,

Looking to get some help or suggestion to wire up the Intake Air temp sensor (IAT) into the engine harness.... I need to know what's the Pins you guys use to wire up the sensor

Again, it is for power FC SR2D19 which is for Zenki SR20DET to be exact

Sent from my HUAWEI VNS-L22 using Tapatalk

[Lil_D]

the wires you need to tap into are the EGR temp sensor wires and sensor ground

pn 57 is ground (thats the one in the pics showing the 4th pin on the bottom if you count from the right)

pn 30 is the red wire (first pin from the right top row)

according to this http://forums.nicoclub.com/zenki-s14-sr20det-apexi-power-fc-djetro-sensor-install-t396226.html

[Kriskouki]

I am a bit confused as i found another piece of information off wiring specialist that IAT sensor is connected through pin 27....see pictures attached

So, anymore help?

https://uploads.tapatalk-cdn.com/20170608/2e4121c293fac7b37c45e97d0a4324bf.jpg

Sent from my HUAWEI VNS-L22 using Tapatalk