TheRealSy90
05-29-2017, 06:38 PM
Complete S13 SR20 AEM Infinity standalone setup. PM or Text 928-261-6932.
Take this all home for $2,500. I'm pretty sure with a proper tune and all the failsafes this would enable, you couldn't blow your sr20 if you tried to.
New AEM Infinity 506 EMS, never used.
MSRP was $1,400.
New custom built Wiring Specialties Pro-Infinity506 s13sr-s13 engine harness wired for boost control, fuel pressure, oil pressure, wideband o2 feedback, fuel ethanol content all directly fed to the ecu for logging and tuning, wired with injector dynamics injector plugs. Never installed. This is not their off the shelf harness and I have over $800 invested in the harness build plus the build time.
New AEM DTM IAT sensor
New AEM Stainless 2.5bar MAP sensor
New AEM Stainless 150psi Fuel Pressure sensor
New AEM Stainless 100psi Oil Pressure sensor
New AEM 3port boost controller
New AEM fuel ethanol content sensor
New AEM X-Series wideband gauge/controller
There's over $1,000 invested in just the sensors for this setup.
Also have a new Radium top feed s13sr fuel rail and new InjectorDynamics ID1000cc injectors for $400 extra.
And a New Tomei Type-L regulator with the fuel Pressure sensor already installed for $150?
https://uploads.tapatalk-cdn.com/20170530/0dd175f6201667cf47dfb88a42fffac4.jpg
https://uploads.tapatalk-cdn.com/20170530/ddfcab3a61904ec5d88165b0f42528f3.jpg
Sent from my iPhone using Tapatalk
Take this all home for $2,500. I'm pretty sure with a proper tune and all the failsafes this would enable, you couldn't blow your sr20 if you tried to.
New AEM Infinity 506 EMS, never used.
MSRP was $1,400.
New custom built Wiring Specialties Pro-Infinity506 s13sr-s13 engine harness wired for boost control, fuel pressure, oil pressure, wideband o2 feedback, fuel ethanol content all directly fed to the ecu for logging and tuning, wired with injector dynamics injector plugs. Never installed. This is not their off the shelf harness and I have over $800 invested in the harness build plus the build time.
New AEM DTM IAT sensor
New AEM Stainless 2.5bar MAP sensor
New AEM Stainless 150psi Fuel Pressure sensor
New AEM Stainless 100psi Oil Pressure sensor
New AEM 3port boost controller
New AEM fuel ethanol content sensor
New AEM X-Series wideband gauge/controller
There's over $1,000 invested in just the sensors for this setup.
Also have a new Radium top feed s13sr fuel rail and new InjectorDynamics ID1000cc injectors for $400 extra.
And a New Tomei Type-L regulator with the fuel Pressure sensor already installed for $150?
https://uploads.tapatalk-cdn.com/20170530/0dd175f6201667cf47dfb88a42fffac4.jpg
https://uploads.tapatalk-cdn.com/20170530/ddfcab3a61904ec5d88165b0f42528f3.jpg
Sent from my iPhone using Tapatalk