md240
05-02-2017, 06:54 PM
Location: Eastern shore MD
Contact: PM then we can discuss further
Price: $8,000
I had to move out of the area and do not have room to bring the car with me. It is a solid project that is about 90% of the way there.
Car starts, but needs to be tuned, probably best to go with another engine management. A few odds and ends need to be fixed as well. PM me to discuss further.
Engine:
SR20 sleeved block by Mazworx
- Hot tank cleaning
- Sand Blasted Block
- R/R Oil Port Plugs
- R/R Block Small Parts
- Oil Grooved Machined
- Darton Sleeves Installed
- Bore & Hone w/ Torque Plate
- Step Decked
- Line Bore
90mm CP pistons
Manley H-beam rods
Darton sleeves
Cosworth head gasket
Head cleaned and refreshed
Jim Wolf S4 cams
Custom valve cover with catch can
Mazworx timing kit
Boost Junkyz T3 twin scroll manifold
Twin Tial wastegates
Holset Hx35 w/ billet wheel
Freddy intake manifold
1000cc Injector Dynamics
Tomei FPR
Tomei oil pan
Wiring Specialties pro harness
Mishimoto radiator
Greddy intercooler
HKS 3inch Exhaust
Nistune ECU
Stock transmission
Competition Clutch "White Bunny" 6 puck
Suspension:
ISR rear arms
Fortune Auto coilovers
Z32 front brakes
Cosmis MR2 17x9
235/45 BF Goodrich G-Force Sport Comp 2
Body:
Pretty straight body
Car is primered under the 3M vinyl
Do have the front bumper, but missing from pics
Interior:
Decent condition, two cracks on dash
Innovate wideband
Prosport gauges
Momo steering wheel
Nismo shift knob
Sparco seat
http://i.imgur.com/l36zHd3.jpg?1
http://i.imgur.com/lu0myUF.jpg?1
http://i.imgur.com/gDy9N8p.jpg
http://i.imgur.com/IoqkMou.jpg
http://i.imgur.com/ChFwtyw.jpg
http://i.imgur.com/Qv46XjB.jpg
Contact: PM then we can discuss further
Price: $8,000
I had to move out of the area and do not have room to bring the car with me. It is a solid project that is about 90% of the way there.
Car starts, but needs to be tuned, probably best to go with another engine management. A few odds and ends need to be fixed as well. PM me to discuss further.
Engine:
SR20 sleeved block by Mazworx
- Hot tank cleaning
- Sand Blasted Block
- R/R Oil Port Plugs
- R/R Block Small Parts
- Oil Grooved Machined
- Darton Sleeves Installed
- Bore & Hone w/ Torque Plate
- Step Decked
- Line Bore
90mm CP pistons
Manley H-beam rods
Darton sleeves
Cosworth head gasket
Head cleaned and refreshed
Jim Wolf S4 cams
Custom valve cover with catch can
Mazworx timing kit
Boost Junkyz T3 twin scroll manifold
Twin Tial wastegates
Holset Hx35 w/ billet wheel
Freddy intake manifold
1000cc Injector Dynamics
Tomei FPR
Tomei oil pan
Wiring Specialties pro harness
Mishimoto radiator
Greddy intercooler
HKS 3inch Exhaust
Nistune ECU
Stock transmission
Competition Clutch "White Bunny" 6 puck
Suspension:
ISR rear arms
Fortune Auto coilovers
Z32 front brakes
Cosmis MR2 17x9
235/45 BF Goodrich G-Force Sport Comp 2
Body:
Pretty straight body
Car is primered under the 3M vinyl
Do have the front bumper, but missing from pics
Interior:
Decent condition, two cracks on dash
Innovate wideband
Prosport gauges
Momo steering wheel
Nismo shift knob
Sparco seat
http://i.imgur.com/l36zHd3.jpg?1
http://i.imgur.com/lu0myUF.jpg?1
http://i.imgur.com/gDy9N8p.jpg
http://i.imgur.com/IoqkMou.jpg
http://i.imgur.com/ChFwtyw.jpg
http://i.imgur.com/Qv46XjB.jpg