PDA

View Full Version : SR20DET parts

HaLo
10-12-2004, 08:33 PM
Got tons of them..

I got a FULL SR20DET short-block apart, so pick you pieces, from piston to bloc to head, everything is for make... make an offer.

Pistons are grade 2.
HaLo
10-13-2004, 07:53 AM
Maybe a list could help you guys out.. ;)

Here is what I have:

- Bare SR20DET block, has to be honed (maybe oversize 0.20mm), cleaned and decked accord to a specialist.
- 8.5:1 Compression pistons, Grade 2, no detonation marks
- 9.5:1 Compression pistons, Grade 2, from SR20DE
- SR20DET connecting rods
- Front timing chain cover with oil pump
- Rear main crank cover
- Front crank pulley
- Upper oil pan
- SR20DET crankshaft
- SR20DET complete head with 1-2 bent valves, caps are mixed up
- SR20DET Cams with sprokets.
- SR20DET Cast exhaust manifold
- Stock elbow with AIV plug
- Stock clutch
- Stock flywheel

Might Also be for sale if price is right:
- T25 Turbo with 0 Shaft play
- Stock intake manifold without throttle body or idle adjustment unit
- Stock 370cc injectors
- Stock fuel rail with no fuel pressure regulator
- Blacktop head with cams, unmixed caps, but one broken exhaust valve
Romeyo07
10-13-2004, 08:10 AM
is it still in one piece (longblock) If so, how much shipped to 33971?
bing
10-13-2004, 08:12 AM
halo, do you have aftermarket gear for sale?
HaLo
10-13-2004, 08:17 AM
is it still in one piece (longblock) If so, how much shipped to 33971?


What do you need?? Because everything is apart at this point... I did non take the valves apart though...
It might be missing a few shims on the head too.
HaLo
10-13-2004, 08:18 AM
halo, do you have aftermarket gear for sale?

Sorry, no aftermarket cam gears.
Macadoshus
10-13-2004, 09:00 AM
How much for the Upper oil pan?
HaLo
10-13-2004, 09:18 AM
I dunno? 50$ + shipping? It's the big aluminium one, no the same steel one that keep denting. ;)
Macadoshus
10-13-2004, 10:40 AM
Sounds good to me? Any idea on shipping to 19025?

Thanks, the one on my motor was apparently damaged in an accident.
HaLo
10-13-2004, 10:47 AM
20$ should cover it.. my paypal adress is [email protected]

Do you need the bolts too? Just the pan (with baffles) right?
Romeyo07
10-13-2004, 01:05 PM
how much for everything?...or at least what's left?
HaLo
10-13-2004, 01:15 PM
assembled or dissambled?
the short block does not include manifolds, accessories, etc

i could let everything go for around 300$. it would include the following:
- Bare SR20DET block, has to be honed (maybe oversize 0.20mm), cleaned and decked accord to a specialist.
- 8.5:1 Compression pistons, Grade 2, no detonation marks
- SR20DET connecting rods
- Front timing chain cover with oil pump
- Rear main crank cover
- Front crank pulley
- SR20DET crankshaft
- SR20DET complete head with 1-2 bent valves, caps are mixed up
- SR20DET Cams with sprokets.

or whatever you want to offer. take it consideration that shipping might be close to 100$ or more. It has to be freight shipped.
Romeyo07
10-13-2004, 01:16 PM
Can you find out shipping to 33971?
HaLo
10-13-2004, 01:31 PM
I inquired with a freight company. I'll let you know by the end of the day if it's possible and how much it would cost. It would come as a pallet and be stored to an office, close to your location. you would have to pick it up... You can lift all individual pieces by hand.
Romeyo07
10-13-2004, 01:52 PM
Sounds good. I can give you a company you can send it to a buddy of mine owns.
HaLo
10-13-2004, 03:29 PM
Sounds good. I can give you a company you can send it to a buddy of mine owns.

that would help out a lot... espacially if it's a business address.. please pm me the info.
proj240sx
10-13-2004, 09:49 PM
halo you had a PM
bing
10-13-2004, 09:51 PM
not gears, gear.. as in stuff...
HaLo
10-13-2004, 09:52 PM
no aftermarket gear.. that's all on my car. ;)
Macadoshus
10-14-2004, 07:49 AM
PayPal'd you the money for the Upper Oil Pan, if you could include the bolts and the baffle that would be great.

Thanks.
Romeyo07
10-14-2004, 08:12 AM
You've got PM
HaLo
10-14-2004, 09:49 AM
PayPal'd you the money for the Upper Oil Pan, if you could include the bolts and the baffle that would be great.

Thanks.

I will!!
Thanks! I'll send ASAP!
95Blue240sx
10-14-2004, 11:30 AM
ever find out about the price of the t25? let me know, my offer still stands!

BJ
HaLo
10-14-2004, 12:26 PM
ever find out about the price of the t25? let me know, my offer still stands!

BJ

You have the top bid on it. If you're patient, you'll have it.

I just want to put the engine in, make sure it's ok, and then sell the injectors / intake manifold / turbo... I should drop it in on the 23-24th of october.
240Driver39
10-14-2004, 12:31 PM
i may be interesting in the set of 370's, how much are you lookin for them.
HaLo
10-14-2004, 12:38 PM
close to 100$ shipped, but Kid Zelda has dibs on them.
HaLo
10-14-2004, 12:57 PM
UPDATE:

Still for sale:
- 8.5:1 Compression pistons, Grade 2, no detonation marks
- 9.5:1 Compression pistons, Grade 2, from SR20DE
- SR20DET Cast exhaust manifold
- Stock elbow with AIV plug
- Stock clutch
- Stock flywheel

Might Also be for sale if price is right (at the end of October):
- T25 Turbo with 0 Shaft play
- Stock intake manifold without throttle body or idle adjustment unit
- Stock 370cc injectors
- Stock fuel rail with no fuel pressure regulator
- Blacktop head with cams, unmixed caps, but one broken exhaust valve
- Stock SR power steering pump

Pending sale:
- Bare SR20DET block, has to be honed (maybe oversize 0.20mm), cleaned and decked accord to a specialist.
- SR20DET connecting rods
- Front timing chain cover with oil pump
- Rear main crank cover
- Front crank pulley
- SR20DET crankshaft
- SR20DET complete head with 1-2 bent valves, caps are mixed up
- SR20DET Cams with sprokets.
proj240sx
10-14-2004, 01:49 PM
part numbers on stock 8.5 pistons please..
95Blue240sx
10-14-2004, 03:22 PM
im patient, i dont need it right away. But i am very interested, thanks!
HaLo
10-14-2004, 04:37 PM
part numbers on stock 8.5 pistons please..

it's the 54C pistons in a S13 Blacktop SR20DET, Grade 2
BoroBoroS13
10-14-2004, 04:58 PM
I could use the T25, elbow, and if you wanna sell it the turbo inlet w/ intake pipe. You can pm me an your asking price or just post it here. Thanks
HaLo
10-15-2004, 01:50 PM
UPDATE:

Still for sale:
- 8.5:1 Compression pistons, Grade 2, no detonation marks
- 9.5:1 Compression pistons, Grade 2, from SR20DE
- SR20DET Cast exhaust manifold
- Stock elbow with AIV plug
- Stock clutch (pending sale)
- Stock flywheel (pending sale)

Might Also be for sale if price is right (at the end of October):
- T25 Turbo with 0 Shaft play (pending sale, 160$ shipped offer)
- Stock intake manifold without throttle body or idle adjustment unit (pending sale)
- Stock 370cc injectors (pending sale, 85$ shipped offer)
- Stock fuel rail with no fuel pressure regulator (pending sale)
- Blacktop head with cams, unmixed caps, but one broken exhaust valve
- Stock SR power steering pump