harangatang
03-28-2017, 04:19 PM
I purchased this motor with the plans of assembling it to my liking and stabbing it in a S14 street car I was putting together.. Well, plans change! So I need to move this engine now. This engine was built by infamous Derrick Rogers. I meticulously cleaned this thing... There is not a spec of grim on it!
I am willing to do a part out but of course would prefer to sell the whole shebang. I have separated the parts below into sections I would prefer to sell together. I will NOT ship the block. Everything else is shippable on my end as long as you cover the fees.
Parts list-
-S13 sr20det block
-86.5mm Wiseco pistons 9:1 compression
-Eagle forged rods
-Apexi headgasket
-ACL coated bearings
-Stock cams in new head
-New timing chain
-ATI super dampener
-Front and rear main seals
-Cylinder head work- new valve guides, all seals, valve job, surface work and cleaning
-Block was honed and decked
-New OEM S13 water pump
-ISR S14 water outlet neck
-ARP exhaust manifold studs
-ARP intake manifold studs
-Greddy oil filter sandwich plate
-S13.4 valve cover painted wrinkle black with AN fittings already welded in
$2500 FIRM
I also have an alternator, power steering pump and a couple other brackets/accessories for the motor that I will be including with the block.
-Oem exhaust manifold that has been heat treated to 2200 F with a black coating and ported for an external wastegate (used for a short time on a previous motor)
-GTX 2871R turbo with ZERO shaft play (used for a short time on a previous motor)
-Tial wastegate (used for a short time on a previous motor)
-Brand new black/silver XRP water lines and fittings (need to be assembled)
$SOLD
-Brand new custom billet aluminium fuel rail with fittings
- Brand new ID 1000 cc injectors
$500
-Greddy intake manifold (REAL, not an ISIS or other BS)
$SOLD
-JWT S3 cams (not installed & look almost brand new) $SOLD
-Greddy lower oil pan (used, not installed, no hardware. Also been cleaned very well) $SOLD
-New/used upper oil pan (used, not installed, no hardware. Also been cleaned very well) $50
-Brand new Drift freaq engine mounts with heat shields $SOLD
-full silicone piping kit including upper/lower radiator hoses $50
- Brand new FIC 1100 CC injectors w/ 14mm to 11mm adapter caps $300
This turbo setup made 420whp on my buddies sr20 with just a JWT flashed ECU on pump gas. This could easily be a wicked fast street car/race car setup.
Please text me any questions. I don't frequent Zilvia too much these days.
I do not have pics of anything not currently pictured.
Tyler
972.921.9308
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_124034.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_124034.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123957.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123957.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123936.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123936.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123926.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123926.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123914.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123914.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_124100.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_124100.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/Mobile%20Uploads/20160622_091405.jpg (http://s89.photobucket.com/user/harangatang/media/Mobile%20Uploads/20160622_091405.jpg.html)
I am willing to do a part out but of course would prefer to sell the whole shebang. I have separated the parts below into sections I would prefer to sell together. I will NOT ship the block. Everything else is shippable on my end as long as you cover the fees.
Parts list-
-S13 sr20det block
-86.5mm Wiseco pistons 9:1 compression
-Eagle forged rods
-Apexi headgasket
-ACL coated bearings
-Stock cams in new head
-New timing chain
-ATI super dampener
-Front and rear main seals
-Cylinder head work- new valve guides, all seals, valve job, surface work and cleaning
-Block was honed and decked
-New OEM S13 water pump
-ISR S14 water outlet neck
-ARP exhaust manifold studs
-ARP intake manifold studs
-Greddy oil filter sandwich plate
-S13.4 valve cover painted wrinkle black with AN fittings already welded in
$2500 FIRM
I also have an alternator, power steering pump and a couple other brackets/accessories for the motor that I will be including with the block.
-Oem exhaust manifold that has been heat treated to 2200 F with a black coating and ported for an external wastegate (used for a short time on a previous motor)
-GTX 2871R turbo with ZERO shaft play (used for a short time on a previous motor)
-Tial wastegate (used for a short time on a previous motor)
-Brand new black/silver XRP water lines and fittings (need to be assembled)
$SOLD
-Brand new custom billet aluminium fuel rail with fittings
- Brand new ID 1000 cc injectors
$500
-Greddy intake manifold (REAL, not an ISIS or other BS)
$SOLD
-JWT S3 cams (not installed & look almost brand new) $SOLD
-Greddy lower oil pan (used, not installed, no hardware. Also been cleaned very well) $SOLD
-New/used upper oil pan (used, not installed, no hardware. Also been cleaned very well) $50
-Brand new Drift freaq engine mounts with heat shields $SOLD
-full silicone piping kit including upper/lower radiator hoses $50
- Brand new FIC 1100 CC injectors w/ 14mm to 11mm adapter caps $300
This turbo setup made 420whp on my buddies sr20 with just a JWT flashed ECU on pump gas. This could easily be a wicked fast street car/race car setup.
Please text me any questions. I don't frequent Zilvia too much these days.
I do not have pics of anything not currently pictured.
Tyler
972.921.9308
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_124034.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_124034.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123957.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123957.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123936.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123936.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123926.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123926.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_123914.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_123914.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/IMG_20170323_124100.jpg (http://s89.photobucket.com/user/harangatang/media/IMG_20170323_124100.jpg.html)
http://i89.photobucket.com/albums/k208/harangatang/Mobile%20Uploads/20160622_091405.jpg (http://s89.photobucket.com/user/harangatang/media/Mobile%20Uploads/20160622_091405.jpg.html)