PDA

View Full Version : TX PARTOUT VQ35 Swapped '90 S13 Hatch - Tons of Parts!!!!


FattyMcBaggins
03-28-2017, 03:41 PM
Hey folks, I've decided to part out my project as my priorities have shifted a great deal and I don't really have the time or energy left to play with it. So, my loss is your gain!

The car is a 1990 S13 hatch with a 2003 G35 VQ35DE swap. Tons of parts available, and I will continue to update as I look the car over and spot parts that are maybe forgotten. Please note that most of the performance parts on the engine will not be available to ship until a buyer has been found for the motor/transmission.

Here's a link to my build thread that has pictures of MOST of these parts, in one fashion or another.

BUILD THREAD
(http://forums.nicoclub.com/build-thread-project-blue-t467670-30.html?sid=2762d36ad3615152b0f7189783181991)

All items OBO, and do not include shipping! Anything not listed that you see on the car is available, including the chassis.

$1000 OBO! - Shell - Body is currently primered, as I had an altercation with a deer! Body work is done and car is uber straight. Needs a round of sanding on a few panels. I knew it would be sitting for awhile so last coat of primered was left unsanded so that it would be sealed until I was ready for paint.

$120 - Pignose Lip - Paint is chipped on it, but I actually bought this brand new, right before they became impossible to find new. Urethane is still super flexible, just needs fresh paint. Will ship at buyers expense!

http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/20120323_195953.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/20120323_195953.jpg.html)


$1500 - 03 VQ35DE from a G35 - ~70k miles, put down 273whp and 255 ft/lbs with all mods below.
Flashed ECU (Nats delete, UpRev dyno tuned)
*Harness will need to be replaced as wiring has been customized for a very specific setup
No Clutch/flywheel - Can be included (see OS-Giken)"

http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/IMG_0148.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/IMG_0148.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P6280055.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P6280055.jpg.html)

$950 - CD 009 6-Speed Transmission - Shortened linkage

$350 - McKinney VQ Swap mounts

$1000 - McKinney race headers, ceramic coated and wrapped. Beautiful set of headers with V-Bands welded to them.
http://i344.photobucket.com/albums/p356/fattymcbaggins/IMG_0679.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/IMG_0679.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2668.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2668.jpg.html)

$100 - JWT Pop charger w/ Polished Z Tube
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190019.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190019.jpg.html)

$600 - OS-Giken Super Single clutch / Flywheel setup - Flywheel weighs 8-9lbs I believe...makes for a super rev happy motor when compared to the stock 31lb flywheel!
http://i344.photobucket.com/albums/p356/fattymcbaggins/Deer%20Hunter/IMG_0672.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/Deer%20Hunter/IMG_0672.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/Deer%20Hunter/IMG_0671.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/Deer%20Hunter/IMG_0671.jpg.html)

$350 - Driveshaft - VQ to J30 Diff (ABS)

$250 - J30 Diff
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190006.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190006.jpg.html)

$180 - Shifter Adapter
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190008.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190008.jpg.html)

$175 - Motordyne plenum spacer

$350 - Motordyne MRev2 Lower Plenum

$125 - Fuel Labs FPR setup for converting VQ returnless setup to S-chassis return-style flow path
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2694.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2694.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2693.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2693.jpg.html)

$20 - Walbro 255

$150 - Mishimoto KA Rad with custom AN lines plumbing to VQ
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190010.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190010.jpg.html)

$175 - Mishimoto dual E-Fan/shroud

$70 - Derale Dual Fan Controller

$300 - Chase Bays Powersteering adapter kit with power steering cooler

http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190009.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190009.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P5190005.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P5190005.jpg.html)

$550 - Tien Flex Coilovers

$100 - ISIS suspension Arms front and back
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2653.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2653.jpg.html)

$75 - Circuit Sports FLCA
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2652.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2652.jpg.html)

$220 - Suspension Techniques Sway Bars

$1800 - 4x113 Gram Lights 57C's - 17x9 +25 and 17x7 +27
Rims are wrapped in Bridgestone RE11A's, rears have a ton of tread left, fronts have some camber wear"
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/IMG_0098.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/IMG_0098.jpg.html)

$450 - Kouki S13 Tail Lights
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/P6210008.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/P6210008.jpg.html)
http://i344.photobucket.com/albums/p356/fattymcbaggins/VQ%20Swap/100_2923.jpg (http://s344.photobucket.com/user/fattymcbaggins/media/VQ%20Swap/100_2923.jpg.html)

$400 - Apexi GT Spec Exhaust - Modded for Vbands/VQ Ypipe

2muchboost
03-29-2017, 10:50 AM
Hey bud....tossing the idea around of building my current S14. I am not sure if it makes sense to complete a swap right now due to business expansion. But out of interest to see if its feasible, could you give me a picked up price on the following. I am located in Austin so everything would be picked up:

-VQ35
-CD009
-McKinney Mounts
-McKinny Headers
-Shifter Adapter
-Motordyne MRev2 Lower Plenum
-Motordyne Plenum Spacer

If the cost is feasible then I would consider buying the entire setup noted above.

Feel free to PM me your response as your inbox if completely full. Cheers!

FattyMcBaggins
03-29-2017, 11:27 AM
@2muchboost - A PM has been sent, thanks!

I'm going to post a ton of pictures this evening once I get home. I didn't have time yesterday evening.

FattyMcBaggins
03-30-2017, 08:45 PM
----------Bump!

StinkyWhiteMike
03-31-2017, 03:56 PM
Just sent you a PM

FattyMcBaggins
04-01-2017, 09:43 PM
April Fools Bump!

nisileighty
04-02-2017, 11:46 PM
Awesome wheels, wish they weren't 4 lug.

Free bump, glws!


Sent from my iPhone using Tapatalk

Po_31
04-02-2017, 11:58 PM
do you still have the shell im very interested
8328773417