PDA

View Full Version : ALL NEW Front frame Power Brace $89.95/New Urethane Bushing kits for S13/S14

CPARKPowertrix
10-12-2004, 11:15 AM
ALL NEW Front frame Power Brace $89.95/New Urethane Bushing kits for S13/S14

ALSO- Check out our ALL NEW S14 Chrome Finish Suspension arms TC rods/RUCA/TOE and CLOSEOUTS specials From $89.95:

http://www.zilvia.net/f/showthread.php?t=64363

ALL NEW Front frame Power Brace solidifies the frame of the S13/S14 and prevents flex under hard cornering. It eliminates the need for the Nismo power brace and is much easier to install and you do not have to remove and replace the whole front frame assembly. It is also tension able as you increase or decrease outer force on the frame with the adjustable inner knuckle. It is made of the same quality heat tempered and forged steel as the rest of our suspension components and is an absolute must have for the autocross/road race, drift and aggressive driver.

***INTRODUCTORY SPECIAL PRICING ***
S13/S14 Front frame Power Brace $89.95 shipped (IN STOCK) Reg. $109.95

http://www.powertrix.com/240supportthumb.jpg (http://www.powertrix.com/240support.JPG) http://www.powertrix.com/240supportinstall2thumb.jpg (http://www.powertrix.com/240supportinstall2.JPG)
-------------------http://www.powertrix.com/240supportinstall1thumb.jpg (http://www.powertrix.com/240supportinstall1.JPG)

NEW URETHANE BUSHINGS KITS FOR S13/S14

INDIVIDUAL BUSHINGS PRICING:
S13 (ONLY) front tie rod boots $10.00
S13/S14 front lower control arm bushings $29.95
S13/S14 rear arm bushings for (traction, toe rod & RUCAs) $15.00 a set
S13/S14 rear lower control arm bushings $29.95
Sub Frame Spacers $60.00

PACKAGED BUSHINGS PRICING:
S13 Full kit (tie rod boots, front & rear control arm boots, and 3 sets of rear arm bushings) $99.95 shipped (ADD sub frame spacers for $55.00)

S14 Full kit (front & rear control arm boots, and 3 sets of rear arm bushings) $89.95 shipped (ADD sub frame spacers for $55.00)

http://www.powertrix.com/240bushingsthumb.jpg (http://www.powertrix.com/240bushings.JPG) http://www.powertrix.com/240bushingdisplaythumb.jpg (http://www.powertrix.com/240bushingdisplay.JPG)

S13/S14 Sub frame Spacers

http://www.powertrix.com/spacersthumb.jpg (http://www.powertrix.com/s13spacers1.JPG)

ORDERING AND PAYMENT DETAILS:

Please email me:

Name
Shipping address (for shipping quote) if applies
Contact Number
Components wanted

Paypal payments:
If using a Credit card through Paypal use [email protected] Please add 2.9% for Paypal fees.

If transferring from Paypal to Paypal account use [email protected] (NOTE: This account will not accept Credit Card Payments.)

Or you can send a money order to:

POWERTRIX
Attn: Charles Park
9450 Mira Mesa Blvd # B 447
San Diego CA 92126

Please inform me if you are sending payment by mail and send it by means that are track able for your own protection. Example: any shipping company that will provide you with a tracking number or delivery confirmation.

Please feel free to call me or email me at [email protected] with any questions you may have.
jc
10-12-2004, 11:40 AM
Bah! I just bought a NISMO Power Brace too!
HaLo
10-12-2004, 10:45 PM
How much extra is it to ship that brace to Canada?
CPARKPowertrix
10-13-2004, 09:37 AM
How much extra is it to ship that brace to Canada?

Yes, I can ship to Canada. Shipping is an additional $10.00. THanks for the inquiry.
chineseb0i
10-17-2004, 02:58 AM
does this brace fit WITH the nismo power brace? I believe i saw a picture of someones car with aftermarket sway bars, nismo power brace, and the expensive Cusco bar that is similiar to what you are selling.
INeedNewTires
10-18-2004, 01:14 PM
NO, it does not, it takes the place of a NISMO power brace, but is alot cheaper. The NISMO power brace offers reinforced TC brackets as well. IMHO its probably a little bit stronger and engineered better (because its from nismo) but you have to justify the cost. If your on a budget, their probably nearly the same.
CPARKPowertrix
10-19-2004, 01:03 PM
NO, it does not, it takes the place of a NISMO power brace, but is alot cheaper. The NISMO power brace offers reinforced TC brackets as well. IMHO its probably a little bit stronger and engineered better (because its from nismo) but you have to justify the cost. If your on a budget, their probably nearly the same.

The frame brace actually bolts up to where the stock TC rod brackets reside to further enhancing the strenght of those brackets. With the this frame power brace you can even increase the tension at these specific points as it is adjustable from the center of the bar. It a nice feature that the Nismo power brace does not have and it is great for those vehicles that may be just a bit out of alignment do to front end damage and that don't want to replace the whole front bottom frame.
tastyratz
10-24-2004, 02:54 PM
how much would you want for this power brace, rear toe rods, and lca bushings shipped for my s13 to 01876? also can i get everything in the new finish? ive had nothing but problems with the finish on my tc rods, they are already rusting a little bit and i just got them! is there any way I could pick up the new chrome finish center peices off you with nothing else and ship mine back so you could strip them and chrome them as a core or something when they arrive for a few bucks?
DriftingXJDM
10-28-2004, 09:15 PM
Is this still on?
CPARKPowertrix
10-29-2004, 08:53 AM
Is this still on?

YES, The group buy is still running. This is also an open group buy. There is no minimum and no waiting for others to join the GB. All products are in stock and shipped with in 24hrs of ordering. Thanks for the inquiry.
MELLO*SOS
10-29-2004, 11:54 AM
Paypal'd ya $92.55 now for s13 brace... Pls ship to my work addy :D
MELLO*SOS
11-02-2004, 11:07 AM
Got my bar today, it looks like top notch quality. No installation instructions or hardware included. Will probably install this weekend.

Thanks!
theicecreamdan
11-02-2004, 12:29 PM
Can locals pickup parts for super deals?
decksy
11-03-2004, 12:40 PM
Got my bar today, it looks like top notch quality. No installation instructions or hardware included. Will probably install this weekend.

Thanks!

no bolts or anything?
CPARKPowertrix
11-03-2004, 08:24 PM
Can locals pickup parts for super deals?

Yes, local pick up is fine. Just give me a call and let me know when you are going to be in my area as I am usually out and about either R&Ding and or delivering product. Also, depending on how local you are I can deliver to you as long as its not too far off of my regular routes. Thanks.
CPARKPowertrix
11-03-2004, 08:28 PM
no bolts or anything?

There is no hardware needed for installation as you will use the stock hardware for installation. As illustrated in the above pictures, the brace is installed in front of the front sway bar using the stock nuts and bolts that hold the tension rods in place.
tastyratz
11-04-2004, 06:39 AM
yea you dont need anything to install you dont have already, and its extremely easy I could have my grandmother do it! the fact that its adjustable is really awesome too. btw charles just out of curiosity is it s13 or s14 specifically made applications or is it universal one bar fits all 240s 89-98 kinda thing? btw just wanted to mention i got mine in the mail the other day and its top notch quality too!
DriftingXJDM
11-06-2004, 07:59 PM
Damn everytime I read this I really want one... do you still have this? if you do I will send you a money order. are this for S13/S14 or is it just for one car? thanks
MELLO*SOS
11-06-2004, 08:06 PM
Okay I tried to install my bar today, and found that the nuts on the tension rods are on there too tight. I tried using two impact guns but they both sucked... I couldn't break the nuts loose with my ratchet either :(. It should have been an easy install, it's just that there is a lot of flex due to the rubber bushing in there, and I have little leverage laying under the car. Anyone else experience this? I'm going to see if I can rent or borrow a higher torque impact wrench tomorrow.
CPARKPowertrix
11-09-2004, 12:57 PM
Damn everytime I read this I really want one... do you still have this? if you do I will send you a money order. are this for S13/S14 or is it just for one car? thanks

Yes, we have them in stock they are for both S13/14
CPARKPowertrix
11-09-2004, 01:03 PM
Okay I tried to install my bar today, and found that the nuts on the tension rods are on there too tight. I tried using two impact guns but they both sucked... I couldn't break the nuts loose with my ratchet either :(. It should have been an easy install, it's just that there is a lot of flex due to the rubber bushing in there, and I have little leverage laying under the car. Anyone else experience this? I'm going to see if I can rent or borrow a higher torque impact wrench tomorrow.

We usually use air tools for the installation of the tension rods. The tension rods come with the locknuts to ensure they do not come loose. Some do not like using them and just use the stock nuts as they have a bit larger base on the nut. (your preference/one is not better than the other) If you do use the stock nuts, make sure you torque them to 80-85 ft-lbs. Please let me know if you have any further questions.
AzNCmB
11-11-2004, 01:52 PM
is this gb still going on?
snp_ethan
11-23-2004, 03:27 AM
Ji. Im interested in the bushings and spacers, but how hard arre thye to install? ive heard its a bitch to get them done, so, my question is, do you have any manul for installation ro something? I have an S14, what is the shipping to 90019, im sory if you answered any of these q in the thread i just coulnt read them, please PM me with this info, since i write a few msgs and i loose track of all of what i wrote
s14turbosilvia
11-23-2004, 08:58 AM
Charles-
I would like to place an order for the chrome finish front tension rods and your power brace bar, shipped to 49009, Kalamazoo, MI. Oh, for an S13 please.

Please reply with a total cost, and I can paypal you the money asap.
-ben
Ghettokracker71
11-30-2004, 12:04 PM
How much shipped for the power brace,and RUCA bushings for an S13 ? (23237, or 23831 if it matters.)

Thanks.
drift_time
12-08-2004, 08:23 AM
still for sale?
snp_ethan
12-16-2004, 05:41 PM
do you have any instructions on how to install the bushings? i've heard its a real pain and I am really short on cash so I was thinking bout doing it myself
ihmeg
12-16-2004, 09:01 PM
gb still going ? if so i'll take an s13 tension rod
rps13sh
01-03-2005, 07:55 PM
Bah! I just bought a NISMO Power Brace too!

sell your powerbrace. ill buy it.