basicmods
03-02-2017, 06:38 AM
Well guys, I sold my S12 so I'm out of the game. I have a BUNCH of parts I was storing in prep for KA24De turbo project that never happened. Instead of all this stuff sitting around, I figure maybe I can sell it to fund other projects. Located in eastern IA. Shipping at buyers expense. All parts for KA24DE.
Stuff for sale:
NismotronicSA tunable ECU installed in S13 KA24DE ECU. Comes with everything needed including the breakout box. This was in my car and running, but pulled from my car before I sold it. Comes with software (download from website) and all the stuff that normally comes with the NismotronicSA and it's already installed in a ECU. Also comes with moates bluetooth module installed. $450 - SOLD!
Innovative LC1 wideband O2 w/ LCD display. works, but o2 sensor may need replaced as it's been several years since i used it. Comes with a little LCD screen to read AFR and cables to hook to your computer (you will need a usb-serial adapter) - $100
Holset HE351CW turbo - been sitting a while. Minimal play, pulled from running truck. $225 - SOLD
qty (6) Deatschworks 740cc injectors - cleaned and flow tested by deatschwerks and never installed since - still sealed in bags. Flow results available. Have 6 total injectors - get 6 for less than the price of 4! Comes with KA24DE fuel rail and regulator. WAS $400, now $430 - read below
UPDATE ON INJECTORS - I have sent these back to DW for flow check and actuation to make sure they are working. Including shipping to/from Deatschwerks, this would normally cost ~$50. I am increasing the price of the injectors from $400 to $430. This will include new flow test results and verification of function. I will post back once I recieve these back from DW to let you know they are available again. If you are interested and want them - PM me and we can work something out. SOLD
Fidanza KA24DE aluminum flywheel - needs friction surface replaced (~ $50 most everywhere) - $120
JGY top feed fuel rail with brackets and 50 lb injectors that are probably not good anymore from sitting so long. Would recommend cleaning at a minimum - $50
Large FMIC - >3" thick, approx 12" tall, probably 24" wide. $50.
No name stainless t3 tubular manifold - $50
No name welded t2 log manifold - $40
Bunch of other stuff I will update as I find/have time. I will also add some more pictures as I get a chance to take them. Reply here or via PM
Thanks! Pics coming soon.
Stuff for sale:
NismotronicSA tunable ECU installed in S13 KA24DE ECU. Comes with everything needed including the breakout box. This was in my car and running, but pulled from my car before I sold it. Comes with software (download from website) and all the stuff that normally comes with the NismotronicSA and it's already installed in a ECU. Also comes with moates bluetooth module installed. $450 - SOLD!
Innovative LC1 wideband O2 w/ LCD display. works, but o2 sensor may need replaced as it's been several years since i used it. Comes with a little LCD screen to read AFR and cables to hook to your computer (you will need a usb-serial adapter) - $100
Holset HE351CW turbo - been sitting a while. Minimal play, pulled from running truck. $225 - SOLD
qty (6) Deatschworks 740cc injectors - cleaned and flow tested by deatschwerks and never installed since - still sealed in bags. Flow results available. Have 6 total injectors - get 6 for less than the price of 4! Comes with KA24DE fuel rail and regulator. WAS $400, now $430 - read below
UPDATE ON INJECTORS - I have sent these back to DW for flow check and actuation to make sure they are working. Including shipping to/from Deatschwerks, this would normally cost ~$50. I am increasing the price of the injectors from $400 to $430. This will include new flow test results and verification of function. I will post back once I recieve these back from DW to let you know they are available again. If you are interested and want them - PM me and we can work something out. SOLD
Fidanza KA24DE aluminum flywheel - needs friction surface replaced (~ $50 most everywhere) - $120
JGY top feed fuel rail with brackets and 50 lb injectors that are probably not good anymore from sitting so long. Would recommend cleaning at a minimum - $50
Large FMIC - >3" thick, approx 12" tall, probably 24" wide. $50.
No name stainless t3 tubular manifold - $50
No name welded t2 log manifold - $40
Bunch of other stuff I will update as I find/have time. I will also add some more pictures as I get a chance to take them. Reply here or via PM
Thanks! Pics coming soon.