Helical LSD S15 SpecR

[mfvmx]

I have two HLSDs for sale from an s15 Spec R these are great for road racing and grip driving. Items are located in Richmond, VA. Email me for a shipping estimate.
Thanks,
Morgan [email protected]
http://i11.photobucket.com/albums/a186/mfvmx/s-l16002_zpse9m4qsdj.jpg
Selling:
$425 HLSD + axles
$475 HLSD + axles + 12-13mm bolts

[mfvmx]

I still have both diffs. I'll do the bolts separate for $85 shipped.

[s13love-green]

Prices shipped ?

[tonee]

If I'm swapping the s15 helical diff into an s13 housing, can I just re-use the bolts on the open diff?

[mfvmx]

Prices shipped ?
Send me your zip and I can get a quote, basically 30lbs from 23227.

If I'm swapping the s15 helical diff into an s13 housing, can I just re-use the bolts on the open diff?
You can just use 12mm bolts in a 13mm hole, I have done it once making sure to use loctite and torque them to the higher end of the spec.

[mfvmx]

One left, email for quotes.

[240boi115]

Interested. What would I need to put this into an s14 pumpkin?

[mfvmx]

Interested. What would I need to put this into an s14 pumpkin?
Ok let me search for you, here it is http://zilvia.net/f/showthread.php?t=89181&highlight=S15+HLSD

you will need:
-S15 differential
-S15 output shafts (both sides)
-80W-90 gear oil (2 quarts)
-RTV
tools:
-floor jack (one with a very wide seat is prefered)
-jack stands
-12mm wrenches (2)
-14mm wrenches
-17mm wrenches
-vise and breaker bar or impact gun

[mfvmx]

Who else wants one, I can part out too if you just need axles or bolts?

[Boss240]

How much for bolts shipped 92557

[mfvmx]

I'll do the bolts separate for $85 shipped.
How much for bolts shipped 92557
I'll sell the bolts for $85 shipped.

[xGoggles88x]

Do you still have? what would I need to fit this into a s13 pumpkin?

[mfvmx]

Do you still have? what would I need to fit this into a s13 pumpkin?
Yes, still have one.
http://zilvia.net/f/showthread.php?t...light=S15+HLSD

you will need:
-S15 differential (from me)
-S15 output shafts (both sides) (from me)
-Conversion Bolts (from me)
-80W-90 gear oil (2 quarts)
-RTV
tools:
-floor jack (one with a very wide seat is prefered)
-jack stands
-12mm wrenches (2)
-14mm wrenches
-17mm wrenches
-vise and breaker bar or impact gun

[xGoggles88x]

Yes, still have one.
http://zilvia.net/f/showthread.php?t...light=S15+HLSD

you will need:
-S15 differential
-S15 output shafts (both sides)
-80W-90 gear oil (2 quarts)
-RTV
tools:
-floor jack (one with a very wide seat is prefered)
-jack stands
-12mm wrenches (2)
-14mm wrenches
-17mm wrenches
-vise and breaker bar or impact gun
How much would it cost to ship?

Sent from my SM-G930T using Tapatalk

[mfvmx]

Email me (your address) for a shipping estimate.
[email protected]


How much would it cost to ship?


Email or PM me your address and I will come back with shipping cost. As an example it would cost $67 to California.

[mfvmx]

Who wants one? I've had a bunch of nibbles but no bites. Yes it fits S13 and S14.

[mfvmx]

I still have one more I need to sell, anyone? I can separate out the parts if needed.

[mfvmx]

One more diff, flanges, and 2 sets of bolts for sale.

[Elian1134]

Purchased one from this dude. Legit diff and output shafts. Easy install.

[anti tyler]

You need to entertain using a regional rate box or even a medium flat rate box would fit this (shipped plenty diffs in the medium box)

That's going to cut your shipping down to less than $15 for priority. Toss insurance on and you're shipping for less than $20 vs "$67 to California "

[Bernie (NoVA)]

You need to entertain using a regional rate box or even a medium flat rate box would fit this (shipped plenty diffs in the medium box)

That's going to cut your shipping down to less than $15 for priority. Toss insurance on and you're shipping for less than $20 vs "$67 to California "

AMEN to that

[mfvmx]

You need to entertain using a regional rate box or even a medium flat rate box would fit this (shipped plenty diffs in the medium box)

Thanks for the tip. I am looking into it now. The diff is 8" dia. and 7" tall, the med and large flat rate boxes seem to only 5 1/2" tall on the inside what box did you use?

[mfvmx]

One more diff, flanges, and 2 sets of bolts for sale.
Everyone ready for summer? Offer still up.

[1993fdrx7]

interested if you still have it next Tuesday

[RalliartRsX]

Thanks for the tip. I am looking into it now. The diff is 8" dia. and 7" tall, the med and large flat rate boxes seem to only 5 1/2" tall on the inside what box did you use?

Look again. There are two types of boxes each and the other size may actually fit this diff.

[mfvmx]

Look again. There are two types of boxes each and the other size may actually fit this diff.
Still looking, all I can find is 13-5/8" x 11-7/8" x 3-3/8" or 11" x 8-1/2" x 5-1/2" the other box is only 3" the big box is 5" can't fit 8"x8"x7" in a 5" box.

Even the large flat rate boxes are 23-11/16" x 11-3/4" x 3" or 12" x 12" x 5-1/2" still 3.5" or 5.5" in one dimension.

[Bernie (NoVA)]

Still looking, all I can find is 13-5/8" x 11-7/8" x 3-3/8" or 11" x 8-1/2" x 5-1/2" the other box is only 3" the big box is 5" can't fit 8"x8"x7" in a 5" box.

Even the large flat rate boxes are 23-11/16" x 11-3/4" x 3" or 12" x 12" x 5-1/2" still 3.5" or 5.5" in one dimension.

You can make it work. It's not like the box can't bulge a little.

[mfvmx]

You can make it work. It's not like the box can't bulge a little.
Why didn't I think of that? Let me save $40 on your $500 purchase by sending it in a sketchy box.
http://i.imgur.com/r2EkL7Q.jpg

[Bernie (NoVA)]

Why didn't I think of that? Let me save $40 on your $500 purchase by sending it in a sketchy box.


It doesn't have to be *that* sketchy :-)

[dcjodon]

:rofl: Would the post office accept a flat rate box like that? A little bulge is fine but that's like twice the height now.

[mfvmx]

Just acquired two more sets if anyone is interested in one.

[salemboy19]

still for sale? i can come pick up.

[mfvmx]

still for sale? i can come pick up.

Yep, I pm'd you while back, haven't heard anything.

[s14rjs]

Hey, you still got the diff with axles? I emailed you. Interested PM me.

[97SerevoSX]

I'm also interested in one of these. Do you still have any or know when you can get more?

[mfvmx]

I'm also interested in one of these. Do you still have any or know when you can get more?
Yeah still have one.
PM and I can give you a shipping quote.

[mfvmx]

Bump, realized I still have one of these I never installed.