PDA

View Full Version : FS:parting out 180sx drift car


daisosasen01
10-09-2004, 10:23 AM
Ok, Lets try this one again the previous thread was getting to long of people not buying anything. I am parting out my car. Here is everything on the car as of now. Everything has to go even the shell:

Automobile
--------------
1990 240sx ( CLEAN TITLE) Hatchback ( 5 spd )85,562 miles on shell, CLEAN TITLE, already has

engine bay seam welded and rear fenders pulled, has dolomite gray pearl Audi TT paint job ( $800)

Engine Rebuild Parts
------------------------
S15 Turbo manifold ( New from S15, with taka motorsports turbo lines and manifold and new gaskets)
($780)

SR20det
Engine Rebuild Sr20det motor[Rebello-Racing, NEW bearings, engine seals, O-rings etcREBUIlT WHOLE

NINE YARDS crank mag'd and polished, resleeved, blue printed, acid washed and cleaned, speacial

block and head work for extreme use etc ALL NEW PARTS] Engine has the following aftermarket EVERYTHING IN THE BLOCK IS BRAND NEW ALL NISSAN PARTS DOWN TO THE PISTONS & BEARINGS ...TO THE LAST BOLT!!!!

internals

Valve Springs ( TODA ) ( NEW )
Cams ( 268 with 10 lift TODA ) ( NEW )
Greddy Oil pan ( NEW )

asking price is $2800 ( No clutch or intake nor exhaust turbo. Motor barely broken in, has not

had its second oil change yet.)


Greddy Boost Controller Profec A $220

Suspension Upgrade
----------------------------

Tein tie rods/w tie rod ends ( Still NEW, comes wit extra tie rod ) $150
Tein TC Rods $140
Cusco Front Tower bar $60

Fuel delivery
----------------
Walbro fuel pump ( Still NEW, will be included in the shell sale )
Fuel rail with Injectors ( new, sent to RC engineering came back 444cc) $200

Brake Upgrade Saleing as Kit $1100
----------------
z32 Rear rotors & Rear spindles/w e-lines
Z32 (300zxTT 91yr) Front brake rotors 30mm
Z32 (300zx) Braided brake line's
z32 Front calipers/pair
z32 Rear Calipers/pair
z32 brake MC plug
z32 brake MC
New Z32 brake booster ( Comes with warranty recipte)

With ( complete ) 5 lug add another $420


Intake
--------------------

Intercooler Trust twin core ( With new end tank, for V mount/top mount on Sr20det ) $200 Packaged ready to ship
Z32 maf/ + plug Tomei ( Plug still NEW, unused ) $130


Body
--------------------

Body Kit Type III 180sx [ touge factory] - $500 ( used/priemered gray)


Wheels
---------------------
Volk Racing [ Winning] 18x8.0 offset +45 - $400
R32 GTS rims (2)( Comes with 2 new Kumo tires) - $220
Wheel Adaptors 1.5 inch think (2) ( life time warranty, alumn billet made) - $200
Wheel Spacers 5mm (2) - $30
5Zigen FNO1R -C (R)18x9.5, +22 / (F) 17x9, +15
( Still NEW, With tires 235/40/17 perrelli front, 225/40/18 Dunlop rear ) - $880
Dori Dori wheels 15x8, offset +35 - $450
( Still NEW, freshly powder coated face, alumn polished lip )

Transmission/Drivetrain
--------------------------
sr20det tranny ( s14/s14) with new seals ( barey bought from phase2motortrend)- $280
Ogura Clutch ( Still NEW, 2 months old, with Ogura throw out bearing ) - $700 even
180sx rear pumpkin and axles ( VLSD ) - $250


Electrical
----------------
Apexi S-AFC II ( Still NEW in box ) $250
HKS Champ System with monitor $250

Interior
----------------
Recaro SPG seat ( With seat rails for s13/s15) $550
Nardi Steering Wheel $80
Nardi Hub $20
Black simpson racing 3 inch seat belt $78
Racing Seat Belts 3 inch, Red RCI racing (2) $85
Sabelt -2inch 4pt Harness $50

Exhaust
---------------
Kakimoto R Muffler system for 180sx ( Still NEW ) $400
Test Pipe [ Davis Muffler & Hitch ] $20
Blitz 3inch Downpipe $100
Turst Turbo Extension ( Still NEW ) $180
5 Zigen 304MAX Muffler system for s13 ( Still NEW ) $400


I do not like lowballers. So don't bother sending another e-mail if I do not reply. Everything is

still new for the exception of certain parts. Send me an e-mail and I'll answer all questions

pertaining to parts. I also have the following parts availlable.

s14 zenki Front end, fenders,bumper( with all bumper lights),hood ( no head lights, I think I have

the front corner lights, front end is purple in color) Will include an extra driver side fender
$500

5 spd swap ( includes tranny, pedals clutch/brake, Clutch MC, ECU for 1989-90 or 1995 5spd)
- Also have fuse box and engine bay wireing harness with tranny harness for the 1995 5 spd, plus

front half of manual drive shaft s14. Bolt to rear half auto drive shaft and you are golden.
$400

s14 black interior complete with rug ( no holes), head liner with sunroof, dome lights and rear

view mirrow. ( No dash or center counsole has been sold)
$400

s14 airbags $120

Mic s13 hatch interior ( all are black in color )

Bottom step door jam plastic
Rear hatch upper quarter panel ( the one that covers the front of the rear quarter

window.
Side kick panel
Front window pillar panels
All for $40

Here are some links:

Misc parts for sale
http://www.imagestation.com/album/?id=4288233337

HKS Champ
http://www.imagestation.com/album/?id=3846180093

Body Kit
http://www.imagestation.com/album/?id=3436200093
Bodykit on car
http://www.imagestation.com/album/?id=4287594547

S14 front end
http://www.imagestation.com/album/?id=4285922219

5 spd swap
http://www.imagestation.com/album/p...l?id=4285922205

S14 Airbags
http://www.imagestation.com/album/?id=4285922229

S14 interior ( sorry no pics of carpet, or roof liner)
http://www.imagestation.com/album/?id=4285922293

Will toss in a free SR20 clutch and pressure plate with bulk sale
http://www.imagestation.com/album/?id=3846895093


Will post more pictures when I get a digi cam again. I am located in San Diego, California. Please e-mail me, I do a bad job of checking PM's.
Thanks
Daiso

[email protected]

kickboxin
10-10-2004, 11:33 AM
Are the prices negotiable? I am interested in the tie rods & ends.
Also what are the prices for front lip and elec. ac unit? Do you know if the ac unit is just a simple swap with the manual unit?

Jeff

brianglawson
10-10-2004, 11:50 AM
do you have the sensors with the ac unit?

sil4ty
10-10-2004, 11:56 AM
email sent

mjjstang
10-10-2004, 01:22 PM
hi, I need a few misc parts, the bracket that goes from the tranny mount that attaches to the exhaust down pipe, also I need the rubber shift boot and plate. also MT trans harness. I need these parts really bad, let me know if you have em. thanks.

Edgar
10-10-2004, 06:51 PM
still got front tower bar (cusco) email me at [email protected] if it is still for sale THANK YOU

daisosasen01
10-10-2004, 10:50 PM
Are the prices negotiable? I am interested in the tie rods & ends.
Also what are the prices for front lip and elec. ac unit? Do you know if the ac unit is just a simple swap with the manual unit?

Jeff
The price are more or less negotiable if you pic up. Other wise not really. I have lowered the prices down already and am looseing alot of money as it. As is expected in any project. ButI am trying to get as much of my money back as possible.

The front lip I guess I can let go for $100 or you can e-mail me. The AC unit I have not tried to swap out yet. It was to be a project for this winter. So I do not know what it involves.
daiso

707_ViCiOuS
10-10-2004, 10:50 PM
Where are you located?

daisosasen01
10-10-2004, 10:50 PM
do you have the sensors with the ac unit?
What you see is what I have. No sensors for the AC unit. I got the other AC mechanical components that's about it.
daiso

daisosasen01
10-10-2004, 10:51 PM
hi, I need a few misc parts, the bracket that goes from the tranny mount that attaches to the exhaust down pipe, also I need the rubber shift boot and plate. also MT trans harness. I need these parts really bad, let me know if you have em. thanks.
Unfortunatlly I am not going to sell those parts seperately. It is hard enought to sale parts as is.. sorry.
Daiso

daisosasen01
10-10-2004, 10:54 PM
Where are you located?
Did you honestly read the my whole FS post???
Don't worry I do it to some times
daiso

sil4ty
10-11-2004, 07:10 AM
you reply to my email?

Edgar
10-11-2004, 11:07 AM
Thank you for the reply email :D

rps13sh
10-11-2004, 11:26 AM
do you have an ecu? or a digital a/c cluster?

daisosasen01
10-11-2004, 03:29 PM
do you have an ecu? or a digital a/c cluster?
Yes I do the pics should be in the "parts link" the first link in my first post. Look thru the links. 90% of the stuff is there.
Daiso

daisosasen01
10-11-2004, 03:55 PM
you reply to my email?
I beleive I did.. please resend to make sure.
If you have sent an e-mail and have not heard from me.. please resend.
Thanks
Daiso

I'LL BE GOING UP TO S.F. THIS COMING THURSDAY, IF YOU WANT ANYTHING PLEASE LET ME KNOW. PAYMENT MUST BE MADE IN FULL BEFORE I LEAVE THURSDAY EVENING AT 2PM. I'LL BE CRUSING AROUND S.J/SUNNYVALLE TO SACRAMENTO AND CITIES IN BETWEEN. AS LONG AS IT IS NOT TOO OFF THE BEATEN PATH OF THE FWY. That includes Vallejo, Fremont, Dixon, Davis, Berkeley, Fairfield etc.

Edgar
10-11-2004, 04:46 PM
Sorry but no pictures of the strut bar here. So if you can email me one thank you.

sil4ty
10-11-2004, 07:04 PM
I beleive I did.. please resend to make sure.
If you have sent an e-mail and have not heard from me.. please resend.
Thanks
Daiso


sent the email again...i want to buy the simpson racing harness. just need to know shipping to 70739 and the paypal address.

Edgar
10-11-2004, 07:32 PM
Yo Gus you have another email. Please reply when you get the chance thanks.

Edgar

JaeTea
10-11-2004, 08:22 PM
YGM.

Is the sabelt harness the clip in one with the eyelets, or do you have to permanently bolt it in?

daisosasen01
10-11-2004, 09:10 PM
[QUOTE=JaeTea]YGM.

Is the sabelt harness the clip in one with the eyelets, or do you have to permanently bolt it in?[/QUOTE

You will have to bolt them in.
Thanks
Gus

crazy9ceguy
10-11-2004, 09:13 PM
i want the ogura clutch

sil4ty
10-12-2004, 04:38 AM
sent payment for the harness gus

daisosasen01
10-12-2004, 08:00 AM
i want the ogura clutch

ogura clutch has been sold
thanks
DAISO

daisosasen01
10-12-2004, 08:02 AM
YGM.

Is the sabelt harness the clip in one with the eyelets, or do you have to permanently bolt it in?

JT sorry I looked at the wrong harness.
The sabelt harness belt is the clip in, I have never had problems with that belt it holds like a champ.
DAISO

JaeTea
10-12-2004, 09:10 AM
JT sorry I looked at the wrong harness.
The sabelt harness belt is the clip in, I have never had problems with that belt it holds like a champ.
DAISO

Sent ya an email regarding the harness.

daisosasen01
10-12-2004, 01:41 PM
bump bump bump bump bump bump

mjjstang
10-12-2004, 02:11 PM
well then can i get those parts free if you dont wanna sell em?

Mike22bSTi
10-12-2004, 02:46 PM
Email sent, interested in ECU, it's a 62 right?

sticky240
10-12-2004, 06:02 PM
pm sent, please let me know asap

S14DriftR
10-12-2004, 07:05 PM
how many dori dori rims do you have, 4 or 5 lug?

daisosasen01
10-12-2004, 08:59 PM
how many dori dori rims do you have, 4 or 5 lug?
I have all four rims.
they are 5 lug
thansk
gus

daisosasen01
10-12-2004, 09:01 PM
well then can i get those parts free if you dont wanna sell em?
which parts are you asking for?
let me know
[email protected]
sorry If I have not gotten back to you, so many e-mails too many people.

daisosasen01
10-12-2004, 09:05 PM
Email sent, interested in ECU, it's a 62 right?
the ECU is not a #62
this is an OG built black top man.. it more tight then OG JDM Tight.. lol :Ownedd:

But seriously the ECU is a black top s13 sr20det #E5. Popular in japan for its ease to chip and mod.
thanks
daiso

S14DriftR
10-13-2004, 12:30 AM
I have all four rims.
they are 5 lug
thansk
gus
damn, too bad they are 5 lug, that is a steal for 4 dori dori's.

Edgar
10-13-2004, 02:18 PM
Post the updated list on www.driftingforum.com
Thank You

NISMO240SXSE1
10-22-2004, 04:23 PM
Do You Still Have The Nardi Wheel And Hub?

hongsukjune
10-22-2004, 05:12 PM
i want the nardi steering wheel and hub. i'll pick it up cuz im in sd too. send me a email at [email protected] or pm w/ your address or something so i can come get it

SoCalS14
10-22-2004, 05:53 PM
Interested in the Fuel rail and injectors...

email:
[email protected]

240trainee
10-22-2004, 08:41 PM
Do you have a horn button for the Nardi wheel? I have a nardi wheel coming, but no horn button.

daisosasen01
10-23-2004, 02:56 PM
Do You Still Have The Nardi Wheel And Hub?
sorry the nardi hub adn wheel has been sold.
daiso

daisosasen01
10-23-2004, 03:02 PM
How can I edit my list???
daiso

240trainee
10-23-2004, 03:45 PM
Go to the initial Post, there are buttons on the bottom left of the post, edit is one of them.

psychedelicbeats
10-23-2004, 03:56 PM
are there any pics of the car actually in drift mode? or is it just pics of the car pieced together with "drift" parts?

S13 RKT
11-22-2004, 12:56 PM
do you still have the z32 maf with plug?

WILDACEX187
11-22-2004, 01:23 PM
i want some of this stuff too. will u please update ur list so i can know wats sold and not. thank u.

s14turbosilvia
11-22-2004, 06:51 PM
interested in the GReddy intercooler core and Z32 MAF and Tomei plug.

-ben
email me
[email protected]

oOdextaOo
11-23-2004, 01:40 AM
still got the injectors and fuel rail? if so i'm interested. are they top-feed injectors on an aftermarket fuel rail or side-feed injectors on stock rail? haven't seen too many 444cc injectors so i was curious =P

qvester
11-23-2004, 08:41 AM
how good of condition is the vlsd in let me know [email protected]

whooha1217
11-23-2004, 10:04 AM
nardi hub and steering wheel... where can i get some pictures, i would like to take them if nardi would fit momo steering wheel as well....

AAA240SX
11-26-2004, 06:26 PM
4 Questions:

Is the 5 spd swap still available?

Is the front half of the S14 driveshaft included?

Will the ECU work with a 93 for the auto to manual conversion?

How much shipped to 60107-2304 (Streamwood, IL)?