PDA

View Full Version : CA CHEAP!!! Top-feed fuel rail and 1600cc injectors


racepar1
01-15-2017, 09:38 PM
Top Feed Fuel Rail
This rail was originally made by Luis Gonz. The rail still needs finishing work, brackets and a little polishing to the injector bores. I'm not sure what the fitting size is as i'm not super familiar with AN fittings, but I can tell you they're big. This rail was built with the intention of running E85 and going for big power.
$50

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3304_zpsyt59iuz1.jpg



1600cc top feed injectors
This is a set of 6 1600cc top feed Bosch injectors, originally intended for an RX-7. 5 injector pigtails are also included. The 6th injector is chipped and looks like it was dropped, but resistance is still good and it should be useable. Resistance and operation of all injectors was tested, all checked within .02 ohm of eachother. Obviously these would be intended for use with E85 and BIG power goals.

$60

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3305_zpsdyboyi8o.jpg

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3306_zpsf3n0rlnd.jpg

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3307_zps3dx5gndk.jpg