PBM coilover problem

[240msh]

Alright, so I bought brand new pbm Comp coilovers.. backs are fine, but the fronts, I have no clue what happen. So my front right wheel has 0 camber without changing the camber adjustment on the coilover, but the front left has hella camber and its rubbing on the tire a little. When I take my bumper off and look at the coils from the front one is at an angle and one is almost straight up and down. What is causing this? Can I adjust the knuckle somehow? I noticed the knuckles are at different angles also..

[ZenkiKid]

Something is possibly bent. FLCA maybe?

[240msh]

That's what I thought, but everything looks unbent. The stock struts I had I never had any alignment problems.. I dmd pbm and they said to jack up my car and do something with the knuckle so Ima check it out after work

[FaLKoN240]

https://scontent.xx.fbcdn.net/v/t1.0-0/s600x600/15873148_10154020398152540_5603153786203129393_n.j pg?oh=1ca4a48b50f1f2de7e09a6a3263b8a89&oe=58DB6861

PBM coilovers have offset spindle mounts. Make sure both of your spindle mounts are flipped the right way.

They're probably like this right now / /

instead of like this / \

[240msh]

Good thing you said that because I had no idea, I'll check when I get home. I was asking my friend about it and I brought that up and he was like "nah they don't have that" lmfao. Thanks, I'll let you know if that was the problem

[Bmx240sx]

I don't think it's the coilover I installed my set with no issues


Sent from my iPhone using Tapatalk

[240msh]

You guys will never believe what it was haha, my friend flipped the front lower mount on one when I first got them.. so this entire time I'm trying to figure this out for no reason lmfao