PDA

View Full Version : FL Fully Machined S14 Head For Sale


hanzbrady
01-06-2017, 10:03 AM
I have an S14 cylinder head that was abandoned by a customer a few years back and it's time to go!

All work was performed in house at Mazworx, retail cost would be $2,542.53, this head is available for $1,371.27 shipped anywhere in the US/48, other locations will vary.

Email me at [email protected], or PM me here for questions.
PayPal: [email protected]
---------------------------------------------------------------------------------------

The head includes,

Core S14/S15 Head

Hot Tank/Clean

Sand Blast Head

Remove/Drill/Tap/Replace Oil Port Plugs, SR Head
Drill/Tap 9 Holes 1/8" NPT
Drill/Tap 4 Holes 1/16" NPT

SR 1/2" Stud Machining, Head

Stage 2 Port and Polish (per cylinder)
Open Port and Bowl
Match to Valve Seats

CNC Combustion Chamber, 90mm Bore

Remove, Reinstall, Ream Valve Guide

Valve Job, Race (per valve)
Multi Angle, For Oversized Valves

Resurface Head (parallel)

Supertech Valve Guide Intake Nissan SR20DET/RB26 6 mm stem Manganese Bronze

Supertech Nissan 6mm Exh guide, Mang. Bronze (7mm to 6mm conversion)

Supertech Exhaust Valve Stem Seal, SR20DE (ea)

Supertech Intake Valve Stem Seal, SR20 (ea)

Supertech Intake Valve, +1mm, SR20

Supertech Exhaust Valve, +1mm, 6mm Stem, SR20

30mm Freeze Plug

Pipe Plug, 1/16" NPT

Pipe Plug, 1/8" NPT

---------------------------------------------------------------------------------------

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4843_zpsiyucwstz.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4843_zpsiyucwstz.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4845_zpszrc0c3wz.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4845_zpszrc0c3wz.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4846_zpste7hts3k.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4846_zpste7hts3k.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4848_zpsrmffolzw.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4848_zpsrmffolzw.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4850_zpsrc9uaknc.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4850_zpsrc9uaknc.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4852_zpskgage5mq.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4852_zpskgage5mq.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4856_zpstfzsdivp.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4856_zpstfzsdivp.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4859_zpsc3kuigkk.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4859_zpsc3kuigkk.jpg.html)

http://i1369.photobucket.com/albums/ag214/HanzB_/for%20sale/IMG_4862_zpslfaup6xq.jpg (http://s1369.photobucket.com/user/HanzB_/media/for%20sale/IMG_4862_zpslfaup6xq.jpg.html)

jr_ss
01-06-2017, 10:53 AM
What CFM numbers does s head like this typically flow?

hanzbrady
01-09-2017, 06:53 AM
Bump,

As for CFM, we don't have an in house flowbench for me to test this specific set-up. However it's parts list is what we'd typically recommend for 500-600hp

This head also includes the cam caps and oil spray bars, they're just not pictured as they're boxed up waiting for a buyer.

RalliartRsX
01-09-2017, 06:58 AM
Sweet deal on this!

hanzbrady
01-10-2017, 07:07 AM
bumpppppppp

hanzbrady
01-13-2017, 07:42 AM
Bumppppppp

hanzbrady
01-14-2017, 01:27 PM
bump it up

hanzbrady
01-16-2017, 07:16 AM
Monday Bump!

RTB.1054
01-16-2017, 09:45 PM
How much$$ for a complete head stage 3 cams, springs to match, adjustable cam gears, valves, solid lifters, Rev 10k, 650 HP, shimmed lashed, etc "complete head"

hanzbrady
01-16-2017, 09:48 PM
How much$$ for a complete head stage 3 cams, springs to match, adjustable cam gears, valves, solid lifters, Rev 10k, 650 HP, shimmed lashed, etc "complete head"

As in how much to add those parts to this head?

RTB.1054
01-17-2017, 09:11 PM
Yeah as long as mazworx can stand behind the build and guarantee its performance

hanzbrady
01-18-2017, 07:07 AM
How much$$ for a complete head stage 3 cams, springs to match, adjustable cam gears, valves, solid lifters, Rev 10k, 650 HP, shimmed lashed, etc "complete head"

The price to suit above would be $3588.15 shipped to US48, this includes adding Tomei cam gears, Tomei solid pivots, Tomei 270 solid camshafts, Supertech retainers, Supertech 90lb dual valve springs, Ferrea valve locks, 8 new rocker arms, 16 new guides, a dual guide conversion, assembly, and valve lash. This would make the head "bolt on" As listed in the original ad oversized Supertech valves are already included in the original price.

Let me just remind everyone that they're saving over $1,000 as this head would retail for $4,659.41 + shipping and applicable taxes.

hanzbrady
01-19-2017, 11:02 AM
Bump msglength