kat oil lines, rb25 maf

[RBS14]

I've got the oil line kit from jgs turbo. this is a complete kit, you dont' need anything else in terms of oil lines. feed line, drain line, and all of the fittings that go along with it. oil feed line was installed for about a week, then taken off. nothing is wrong with any of it. not going kat anymore so i don't need it.

$85 plus shipping.

RB25 MAF is a great alternative for those looking for Z32 maf. it's the same size, uses the same plug, and is one of the maf options in SAFC's. so you don't have to find a Z32 maf, you can use this one. It doesn't come with a plug, but z32 is the same.

$75 plus shipping.

[tastyratz]

can you post the part #s you got? theres all different ones they offer for different turbos that are different lengths and prices... any references?

[Dousan_PG]

scott
i WANt that MAFS
its mine now
i can probably swing by weekend or next week
but i want it. for sure! FOR SURE!! ill call you now too

edit: yep its mine.thanks scott. see ya this weekend! or next week

[drift into a curb]

scott, that oil line kit will only work with the z31 T3 turbo set up you were originally going with right? I'm gonna be using a T25 and just want to confirm. Let me know! Thanks

James
[email protected]

[RBS14]

the oil feed kit is the 48" T3/T04 kit.
the oil return kit is the 24" T3/T04 kit.

Drift into a curb: you are gonna need to use the item below on your t25 if it's going on your ka, so the oil drain lines will work.

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLA-010&Category_Code=OIL

As for the oil feed line, if the fitting on there now doesn't thread into the turbo inlet, all you'll need to do is get another fitting that has the right thread pitch, pretty easy.

and as Aaron stated, the MAF is his, SOLD.

[RBS14]

alright, somebody make me an offer on these oil lines!!! I don't want them anymore!

[drift into a curb]

Scott, are you saying I can use YOUR lines if I get that oil drain flange and a new fitting for the oil feed should it not fit? Just want to confirm.

Thanks for the info Scott! Much appreciated.

[drifterx]

do you still have them?

[RBS14]

drift into a curb: yes, that's what i'm saying, you got it right. :)

drifterX: yea, i've still got em. I just replied to your PM. let me know.

[drift into a curb]

Sent you an e-mail.

[tastyratz]

for the drains it shows up this on the site:
TA005 18" Length TK028 T3 & T04 flg. $29.99
TA006 18" Length TK139 TD05 & GT flg $29.99
TA007 24" Length TK139 TD05 & GT flg $34.49
TA008 24" Length TK139 TD05 & GT flg $34.49

they dont show a 24" t3/4 style drain on there. are you sure its not 18" or did they make a mistake on the site and you ordered by phone?
also with the feed you said it has all the fittings but just to confirm are you talking about all the fittings from the kit or are you also talking about the 6061 alum. flanges for drain or inlet they have that you order seperately?

[Maeda]

Scott my friend didn't end up comming through on the oil lines?
doh

bump

[bobbert]

pmed you..

[oOdextaOo]

I'll give you $85 shipped

[RBS14]

John, he only wanted the drain line. Who the hell is gonna buy just a feed line? haha

Dexta: I believe someone is in the process of sending payment, but if he doesn't come through, they're yours.