3.4L 2jz Stroker, built 2jz vvti head, 1jz vvtiswap, polised parts ect..

[MC.Understeer]

BC 3.4L Short block, 94mm leight weight stroker crank, BC rods, JE 10:1 custom pistons w/ upgraded wrist pins, ARP mains, ACL race bearings. Block has been bored .20 over, line honed, deck surfaced. The stroker kit Retails for more than my assembled price, receipt for over $1400 in machine work/assembly plus the ARP mains, ACL bearings and the block itself. Only asking - $6000
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_213757_zpsphag3v9j.jpg
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_214355_zpsmhz06fi0.jpg
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_214332_zps8c4tqotj.jpg
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_213744_zps3xk6l5wp.jpg


Head has been surfaced, valve seats cut, BC oem size intake and exhaust valves, BC 264 VVTi cams, BC retainers, HD springs, BC valves. The head is not on the block yet and I'm open for partout on the head and block. All built by Universal machine. $2600
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_214943_zpsuafjqi9b.jpg
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161129_215050_zpst4uaetlh.jpg

Have a vvti 1jz head that I could sell with the block but ONLY if you buy a short block.

Asking $8k as a whole, this doesn't mean low ball me.

Polished gte water pump, pump and housing only have 20 minutes of run time and were pulled off and parting out now $200

Polished alternator, never used myself but was used before it was polished $200

Polished acc tensioner $100

Polished upper water neck, coolant lines for turbos are welded shut but could be drilled back out $150

Upper neck to water pump crossover pipe $40

Polished timing tensioner $50

Polished Q45 throttle body that has been shaved down and simplified $180

Drift motion -8 black fuel rail $160

1200cc injectors, only had pump gas and idle time $450

Brand new ID1000's $500

New Defi 11k tach $180

Ds oem kouki headlight, no damage $180
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161120_154928_zpsodml0qcz.jpg

New in box Stance s14/s15 D1 spec, 12/6k custom made to order. Msrp is $1795 asking price is $1100

Used S13 SPL tension rods $200
Used S14 SPL RUCA's $200
Used S13 toe arms $200
Used Tein inners $100
Used SPL outters $120


1jzvvti vvti swap
Engine is complete with wiring, ecu and manual late model verossa style shifter so no shifter extension required and has auto trans, engine has never been messed with.
Get Nuts Lab S chassis swap mounts
S13/14/15 one piece driveshaft
Fidanza flywheel
RPS 6 puck clutch almost new
W55

http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161121_155126_zpsle7bucj8.jpg
http://i1266.photobucket.com/albums/jj521/jeffreycelica187/20161205_131955_zpsq1ivypd5.jpg

$3800 obo trades for
Trades for a vented s14 kouki hood
Nice wheels
R154
W55 or w58 with bell housing only
Vented carbon s13 pop up hood
Mint s14 dash
Aftermarket seats
Maybe other cool parts.


OR $1500 for the engine
$300 for the swap mounts
$300 for the Fidanza flywheel
$350 for the RPS 6 puck clutch
$800 for for the trans
$350 for the bell housing
$350 for the driveshaft

All prices are plus shipping and BEFORE Paypal fee's.

Located in Seattle,WA

[Mr. Withdrawl]

if your willing to seperate the get nuts lab mount kit let me know!

[MC.Understeer]

if your willing to seperate the get nuts lab mount kit let me know!

Yeah sure, they go for $300

[MC.Understeer]

Bump, added more parts

[Y0SH]

That's a hell of a deal on all these parts. I'm going to have to keep myself from buying that 3.4 block.

[s14_zenki_seatown]

Bump for the homie