SR20DET Turbo to Turbo Outlet Stud

[garagelu]

Nissan 14414-75F10 OEM Turbo Compressor Housing to Dump Pipe Stud - SR20DET

I need one of these studs. Its the studs that screws into the exhaust side of turbo and bolts to the turbo outlet.

I'm will to pay 7 dollars gifted for the one stud. Before buying I will need the length measurement to make sure it is the one I need. Please PM if you have one.

[cjsjodin]

you need one that goes to turbo elbow right? if so i can get one tonight and ship it tommorow

[garagelu]

you need one that goes to turbo elbow right? if so i can get one tonight and ship it tommorow

No not the stud that goes into the turbo elbow. I need the stud that goes into the turbo exhaust housing.

[EmpyreS13]

Go to your local auto parts store and purchase a 8x1.25mm stud in 40mm length. Most should carry them in stock.

[Nissan2nr22]

Go to your local auto parts store and purchase a 8x1.25mm stud in 40mm length. Most should carry them in stock.

^+

or

http://www.frsport.com/Nissan-14414-75F10-OEM-Turbo-Compressor-Housing-to-Dump-Pipe-Stud---SR20DET_p_61727.html

or

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X8x1.25mm+ stud+40mm.TRS0&_nkw=8x1.25mm+stud+40mm&_sacat=0

or

http://www.ebay.com/itm/ARP-Exhaust-Housing-Outlet-Stud-Kit-for-Nissan-SR20DET-S13-S14-S15-Copper-Nuts-/201370094821?hash=item2ee297cce5:g:Y-IAAOxyQdhSaZKN&vxp=mtr

or

http://www.ebay.com/itm/Nissan-OEM-Exhaust-Housing-Outlet-Stud-Nut-Kit-SR20DET-S13-S14-S15-Silvia-New-/151664350060?hash=item234fe6536c:g:9eEAAOxyWmxSWmD h&vxp=mtr

or

https://www.amazon.com/8-1-25-Exhaust-Manifold-Studs-N14-443-4/dp/B00BMIJUVE/ref=sr_1_2?ie=UTF8&qid=1481139562&sr=8-2&keywords=8x1.25+stud+40+mm

or

https://www.amazon.com/10-Double-End-Studs-8mm-1-25-30mm/dp/B0040CTT9M/ref=sr_1_5?ie=UTF8&qid=1481139580&sr=8-5&keywords=8x1.25+stud+40mm

or

https://www.google.com/?gws_rd=ssl#q=sr20det+8x1.25+stud

[jedi03]

the 300zx one is the same from Nissan directly

[Bernie (NoVA)]

the 300zx one is the same from Nissan directly

SR20DET uses 14414-75F10
VG30DETT uses 14414-17F00

They are not the same. The SR20DET one is longer

[jedi03]

get a bolt from hardware store, cut head off now have stud!

[Bernie (NoVA)]

get a bolt from hardware store, cut head off now have stud!

That's a great way to ruin the threads on the turbo when it smears.
Factory studs are made from heat tempered inconel. This is why they cost real money and are designed for the high temp application.

https://en.wikipedia.org/wiki/Inconel

[TheRealSy90]

Best place for inconel studs that size is Flyin' Miata. At least use them for the four bolt turbine flange.

[jedi03]

ok, well you do you, just tryin to help with some ideas...haven't ruined threads in turbos or otherwise...I do also clean up threads after cutting if I do utilize this method...have gotten the parts from Nissan myself (and used the vg stud) when I was wanting OE quality without going to the aftermarket retailers...no leaks still with second owners on multiple vehicles...have also used the axle bolts when I had extra lying around...don't go crazy on tightening it and works well...