PDA

View Full Version : MA '93 240SX Convertible Rolling Chassis


phunc
11-28-2016, 05:47 PM
Make: Nissan
Model: 240SX
Year: 1993
Trim: Convertible
Miles: 180,xxx
Price: $1000

Selling my S13 Convertible.
Top goes down on its own but needs help to go up all the way. The pump is leaking, likely needs a rebuild.
The door panel/seatbelt conversion was done on this too.

P/O was in what looks to be a low speed hit on the front end. You can see the scuffing on the front bumper. The hood buckled slightly, that's why the cover is missing on that light. The lights are fully functional. I think with a new hood the cover will go back on without issue. Radiator support wasn't damaged at all.

The car has almost no rust. Only spot that's left is in the front part of the rear wheel wells, and it's a small amount. I patched a rust spot in the back of the passenger seat area (probably where some water accumulated due to the rear window being missing).
Rear windows go up and down fine
Trunk needs to be opened with the key.
Rear interior panels - the drivers side one is missing the piece that wraps up around the top part, P/O cut it off. I like the look of it without the panels so I left them off but I'll include them.
Tonneau cover is included - needs some massaging to get it's shape back.

Modifications to the car:
R33 front brake calipers (same as Z32 30mm iron)
Z32 rear brakes
Z32 e-brake fully functional with Z32 2+2 cables
Apexi GT Spec exhaust
S14 leather seats (not perfect)
S14 wheels
ARP extended wheel studs - I think it was 350Z and Evo studs?
Muteki SR48 lug nuts

Any questions please let me know, I check back here pretty frequently. I can take more pictures of anything as well.

Thanks

http://i.imgur.com/EnsPcY0.jpg
http://i.imgur.com/7nFQZZw.jpg?1
http://i.imgur.com/UN4HYha.jpg?1
http://i.imgur.com/12f5r3U.jpg?1
http://i.imgur.com/fjfncYH.jpg?1
http://i.imgur.com/xEpmxPw.jpg?1
http://i.imgur.com/eE16U0l.jpg?1
http://i.imgur.com/kD8BshM.jpg?1
http://i.imgur.com/MDCzutY.jpg?1
http://i.imgur.com/oH3VJ4C.jpg?1
http://i.imgur.com/TvzxgwG.jpg?1
http://i.imgur.com/TvuA332.jpg?1
http://i.imgur.com/MXvonYo.jpg?1
http://i.imgur.com/TkMgio2.jpg?1
http://i.imgur.com/wYJousW.jpg?1
http://i.imgur.com/pcKZ9DA.jpg?1
http://i.imgur.com/4x5RQr1.jpg?1
http://i.imgur.com/rH5kxFL.jpg?1
http://i.imgur.com/RTRua24.jpg?1
http://i.imgur.com/XmvrlVo.jpg

phunc
12-01-2016, 05:43 AM
Bump, still available!

phunc
12-04-2016, 02:26 PM
BUMP - price reduced to $1000
The brakes and exhaust are worth almost this alone - not to mention all the labor from the seat belt conversion! Willing to hear any offers.
Thanks!