Nismo 2way with q45/TT axles

[Clean98]

Nismo 2way R200 diff w/ 6x1 output shafts
Q45 6 bolt driverside axle
Z32 TT 6 bolt driverside axle

All in very good condition it's a spare for my s14 I could use the cash for other goodies

Will ship at buyers expense
SOLD

IMG]http://uploads.tapatalk-cdn.com/20161128/08a7fd98cb4052c5ebb03e785b17e88c.jpg[/IMG]


Sent from my iPhone using Tapatalk

[EnergeticPhenom]

This actually works? Sorry, I could just be informed. I thought my only option was with a Vlsd and those 6 point outputshafts

[Clean98]

Of course it works it's a nismo 2way for a skyline so you get the 6 bolt shafts for the bigger axles


Sent from my iPhone using Tapatalk

[EnergeticPhenom]

Very nice setup! Figured it must be skyline. Do you know if the threads are for m13 or m12 gear bolts?

[Clean98]

It sure I will have to look I had an early model q45 ring gear in it I will measure them tonight


Sent from my iPhone using Tapatalk

[Clean98]

It's 13mm I just googled it


Sent from my iPhone using Tapatalk

[waterboy]

what diff housing does this fit in?

[Clean98]

Q45 is what I had it in not sure what else it fits it's an r200


Sent from my iPad using Tapatalk

[waterboy]

what spline are the stubs
what model nismo diff is it

[TheRealSy90]

The real benefit here is the larger splines on the stub shafts since it's a skyline carrier.


It may be an R200, but the Q45 diff doesn't fit an S-Chassis housing. So if this fits in the Q45 housing, it probably also won't fit an S-Chassis housing.

[Clean98]

Thanks for the info I have a q45 housing in my car I never tried to put it in my s housing


Sent from my iPhone using Tapatalk

[Clean98]

what spline are the stubs
what model nismo diff is it



Not sure I'm the exact model and they are the larger 31 spline stubs


Sent from my iPhone using Tapatalk

[Clean98]

Bump still available


Sent from my iPad using Tapatalk

[MaxTheRabbit]

The real benefit here is the larger splines on the stub shafts since it's a skyline carrier.


It may be an R200, but the Q45 diff doesn't fit an S-Chassis housing. So if this fits in the Q45 housing, it probably also won't fit an S-Chassis housing.

IIRC, the only thing stopping it from fitting is the larger output bearings right? you could press on different bearings to fit the s-chassis housing I think

[rawgarage]

let me know if you need help saving money on shipping

[Clean98]

let me know if you need help saving money on shipping



I priced it out yesterday it was $120 ish ups it's heavy 70 lbs lol


Sent from my iPhone using Tapatalk

[Clean98]

Hump day bump!


Sent from my iPhone using Tapatalk

[r240sxse]

The real benefit here is the larger splines on the stub shafts since it's a skyline carrier.


It may be an R200, but the Q45 diff doesn't fit an S-Chassis housing. So if this fits in the Q45 housing, it probably also won't fit an S-Chassis housing.

This fits the R200, Q45 fits LSD fits S-SHASSIS HOUSING (R200). The housings are what change R230 is the Q45 housing if im not mistaken.

[Clean98]

Q45 is an r200 not an r230 your post is confusing


Sent from my iPhone using Tapatalk

[Koukiii]

Damn dude why is my raise a couple months away...Very nice parts

[Black R]

Dang!

I want just the diff.

[Clean98]

Bump


Sent from my iPad using Tapatalk

[Clean98]

Dang!

I want just the diff.



Make me an offer


Sent from my iPhone using Tapatalk

[Clean98]

It's the weekend bump OBO!


Sent from my iPhone using Tapatalk

[Rb26kouki]

Only those output shafts will work?

Q45 6x1 output shafts seem to be longer

[Clean98]

Yes this is a clutch type the shafts are shorter than the normal q45 lsd has a longer shaft on one side you can't use these on a regular diff it won't work


Sent from my iPhone using Tapatalk

[Clean98]

To the top reasonable obo


Sent from my iPad using Tapatalk

[elguapo260sx]

i run this exact same setup. the stub shafts are from and r32 gtr with the helical diff. i used a q45 housing and gear set. yes it works. driven several thousand no issues. you just need to setup the gear lash. id rather have a 1.5way diff for how i drive. you will also need the q45 hubs or the z32tt hubs, bigger splines for the axles. bump for you

[Clean98]

Thanks!


Sent from my iPhone using Tapatalk

[Clean98]

Bump


Sent from my iPhone using Tapatalk

[Clean98]

Bump $1100


Sent from my iPhone using Tapatalk

[Clean98]

Corn flakes


Sent from my iPhone using Tapatalk

[Clean98]

Bump


Sent from my iPhone using Tapatalk

[d_nice]

bump for the man

[Clean98]

bump for the man



Thanks!


Sent from my iPhone using Tapatalk

[Clean98]

Bump also have a 3.54 ring and pinion for it


Sent from my iPhone using Tapatalk

[Clean98]

Bump


Sent from my iPhone using Tapatalk

[Clean98]

Bump


Sent from my iPhone using Tapatalk

[Clean98]

Some one needs a nice set up for christmas


Sent from my iPhone using Tapatalk

[Clean98]

Bump still for sale!


Sent from my iPhone using Tapatalk