PDA

View Full Version : OR sr20 parts, rb25 parts, s14 parts!


Levi
11-11-2016, 04:02 PM
SR20 PARTS:
- Apexi isamu turbo kit (capable of up to 500whp) - $2000 obo
Garrett/Air Research T3/TO4S turbo
60-1 journal bearing, .48 exhaust A/R
Apexi equal length stainless manifold
44mm Apexi external wastegate
Full 3" custom stainless downpipe, heat wrapped
More info: http://www.2kracing.com/Product/412.html
- REAL Greddy Intake Manifold - $600
- sard fuel rail (brand new never installed) - $200
- ACT 6-puck clutch (less then 700 miles) - $300
- koyo radiator - $200
- sr coil packs - $50
- custom carbon fiber coil pack cover - $75
- nismo motor and tranny mounts - $200
- circuit sport sr motor mounts - $50
- SR20det Water Pump - $30
- Crank Angle Sensor - $75
- Freddy oil pan - $50

Had a fully built s13 blacktop sr, cracked the block at 700 miles during the break in period. This is all that's left of it, sold the head, wiring, power fc, ect. I'm probably forgetting some stuff but that’s most of it. I also have all the little miscellaneous stuff off a SR so if you need something specific just text me.


RB25 parts from a series 1 motor:
- RB25 turbo upgrade 20g turbo I think. (capable of around 400whp) - $300
- RB25 Cosworth Headgasket - $200
- RB25 740cc top feed injectors - $200
- s14 rb25 swap engine harness, wired for z32 maf - $200
- RB25 stock cams - $100
- RB25 series 1 ecu from a r33 - $200
- Rb25 stock exhaust manifold - $50
- RB25 stock lifters – 100
- RB25 stock springs and retainers - $100
- RB25 series 1 coil packs - $100
- RB25 Timing belt cover - $50
- RB25 stock pistons and rods - $150
- RB25 ACT street strip clutch (pretty worn but has a little life left) $100
- Random gaskets and other small parts I’m sure I forgot

I have a lot of random s14 parts laying around my garage as well...
- s14 Tein type flex coils with EDFC controller - $1100
- z32 brake calipers - $200
- s14 Brake Master cylinder - $80
- s14 stock radio - $20
- s14 windshield wiper motor - $30
- ka24de distributor - $50
- ka24de heater core - $50
- s14 ka manual ecu - $150
- s14 ka power steering pump - $50
- s14 fuel pump - $20
- s14 strut tower bar - $50
- s14 cusco camber plates - $200
- s14 Struts (2 are blown) with eibach springs - $200
- s14 stock inner rod ends - $20
- s14 stock front sway bar with end links - $20
- s14 stock rear sway bar with end links - $20

Other stuff:
- Blueridge motorsport catch can/overflow tank combo - $300
- Nismo bucket reclinable seats -$400
- bride type mo seat rails (have passenger and driver side, fits s13 and s14) - $170 each
- Magnaflo muffler - $100
- Megan test pipe (never installed) - $40
- Greddy BOV with hole - $50
- Precision intercooler (can hold up to 700hp) - $300

- Rays Gram Light 57 discontinued wheels 18x8/9” with tires - $1100 obo
18x8/9” +30/34 offset
Tires are about 50% all around, 225/45/18 random brands.
Small curb rash and a couple of them.

- Volk te37 wheels with tires - $3000
19x9.5/10.5 +22 all around
Fronts: toyo proxy t1r 225/40/19 (camber wear on both sides)
Rears: continental 255/35/19 (about 50% left)
Lips used to be red, I sanded them down and painted them gloss black, they are chipping now. I may repaint them before selling unless buyer doesn’t care. Other then that they’re in great condition.

MORE PIX:
http://s1354.photobucket.com/user/LeviathanDC5/library/

Text for quickest response - 503.998.8852
Willing to ship at buyer’s expense.
Please don't waste my time if you're not a serious buyer.
Thanks!

JC831
11-11-2016, 04:29 PM
S14 ecu? What model? Pm me please