PDA

View Full Version : FS/FT SR20 Stuff and a few KA


okis14
10-03-2004, 08:02 PM
1.
Blitz BOV with Pipe (http://www.motorworx.com\240sx\images\BlitzBOV1.jpg)
Blitz BOV with Pipe (http://www.motorworx.com\240sx\images\BlitzBOV2.jpg)

2.
HKS BOV w/o Pipe (http://www.motorworx.com\240sx\images\HKSBOV1.jpg)
HKS BOV w/o Pipe (http://www.motorworx.com\240sx\images\HKSBOV2.jpg)

3.
http://www.motorworx.com\240sx\images\HKSmanifold4.jpg
HKS Manifold (Direct bolton for stock replacement) (http://www.motorworx.com\240sx\images\HKSmanifold1.jpg)
HKS Manifold (Direct bolton for stock replacement) (http://www.motorworx.com\240sx\images\HKSmanifold2.jpg)
HKS Manifold (Direct bolton for stock replacement) (http://www.motorworx.com\240sx\images\HKSmanifold3.jpg)
Never Been cracked.

4.
HKS Outlet Pipe (http://www.motorworx.com\240sx\images\HKSoutlet1.jpg)
HKS Outlet Pipe (http://www.motorworx.com\240sx\images\HKSoutlet2.jpg)


5.
KA24DE Oil pan with drain hole (http://www.motorworx.com\240sx\images\Oilpan1.jpg)
KA24DE Oil pan with drain hole (http://www.motorworx.com\240sx\images\Oilpan2.jpg)

6.
OS Giken Twin Plate (http://www.motorworx.com\240sx\images\OSGiken1.jpg)
OS Giken Twin Plate (http://www.motorworx.com\240sx\images\OSGiken2.jpg)
OS Giken Twin Plate (http://www.motorworx.com\240sx\images\OSGiken3.jpg)
OS Giken Twin Plate (http://www.motorworx.com\240sx\images\OSGiken4.jpg)
Comes with new Pilot/Clutch Bearing and alignment tool if you want it. Approx 8000 miles on it


7.
38mm Tial STYLE wastegate NIB (http://www.motorworx.com\240sx\images\wastegate1.jpg)


8.
Fule Pressure Regulator (Nipple broken) (http://www.motorworx.com\240sx\images\FPR1.jpg)

9.
I also have just done an auto to manual swap (1997 S14) and have all the left over auto parts (including ECU) except the tranny and torque convert. Will go for bread and crumbs.

10.
95 KA24DE Oil Pan. Not drilled.

11.
Integral Knock Meter for SR20 (http://www.integral-ltd.co.jp/img/knock.jpg)
www.integral-ltd.co.jp/knock.htm


12.
Slave cylinder X2
Clutch Master Cyliner
New Clutch Line
New Release/Pilot Bearing with holder and clip




I'm looking for
4 SR Injectors
Z32 MAF w/Plug
Emanage
Apexi/Blitz/HKS Boost gauge. Bar preffered.
T3/T4 Turbo 50 Trim preffered
Tial 38mm wastegate
GReddy Profec B Spec 2
KA Aluminum Radiator
S14 97-98 Front Lip

If interested please PM or email me.
okis14@gmail.com

sykikchimp
10-04-2004, 06:55 AM
it appears your webserver is down or something.

okis14
10-04-2004, 07:55 AM
it appears your webserver is down or something.


Odd. I'm at work and am able to see them.
I'll move them to another server when I get home.

okis14
10-04-2004, 03:03 PM
Updated Links. All pictures should work now.

1101
10-04-2004, 04:03 PM
I still cant see any of the pictures, interested in the KA oilpan. The "/" in the URL's are backwards ( "\" ) but even fixing that cant see them.

NOTE: You must remember UNIX is case sensitive, I capalitized some of the file names and saw the pictures.

Another note: the trailing / in the link is not needed, Oilpan.jpg/ is not the same as Oilpan.jpg

okis14
10-04-2004, 04:44 PM
I still cant see any of the pictures, interested in the KA oilpan. The "/" in the URL's are backwards ( "\" ) but even fixing that cant see them.

NOTE: You must remember UNIX is case sensitive, I capalitized some of the file names and saw the pictures.

Another note: the trailing / in the link is not needed, Oilpan.jpg/ is not the same as Oilpan.jpg

Which pan are you interested in? I have a pre drilled one and a normal one.



Now that is weird. First I had the pictures on a Windows system (One of my home systems) and now they are on Unix (Out on the internet). I made sure the case was the same. I can see them fine.

I didn't use a trailing / in the pictures...did I? I can't find it.

I slapped this page together. This should solve the problems I hope.
http://okifx.dynu.com:8383/s14/240sx/images

If this don't work then I'll do directory browsing or if anyone wants the pictures please email me and I can send them to you. They are approx 3 MB in total.

mixedwell
10-04-2004, 05:04 PM
Hmmm... i see the pictures perfectly. Anyhoo... how much for that clutch? And whats the wear on it?

-mixedwell ;)

okis14
10-05-2004, 06:16 AM
Hmmm... i see the pictures perfectly. Anyhoo... how much for that clutch? And whats the wear on it?

-mixedwell ;)


I've been getting a lot of emails on the clutch. It has approximately 30% wear on it and is not for your normal driver. It will jingle a little (Drawing attention), will not slip (These are known not to slip until the day they die) and the pedal will be a lot stiffer then stock.
As for shipping, it is very very heavy. Expect it to be $50 - $70. I'll weigh it later to try to get a better estimate. It's almost as heavy as a diff in the pumpkin.

Brand new the clutch goes for $1500. I'm looking to get $800 obo. Trades are a plus.


I just weighed the clutch. It's not as heavy as I thought. It seems heavier though. It's only 35 lbs.

95Blue240sx
10-05-2004, 09:06 AM
interested in the un-tapped KA oil pan. how much?

okis14
10-05-2004, 10:04 AM
interested in the un-tapped KA oil pan. how much?


$35 shipped in US

okis14
10-05-2004, 05:08 PM
Both pans and the Blitz BOV are now sold
I don't need SR injectors now.

To add to the things I'm looking for.
Oil Catch
Boost controller prefer GReddy
Turbo Timer
S14 Kouki Lip
JWT ECU for any combination of cobra maf, Z32 maf, 370cc, 550cc
MSD 6al
Electric Fans
KA Koyo Alum Radiator
Crank Pulley
3" Downpipe

okis14
10-05-2004, 06:16 PM
Manaray Sport Euro Design Rims up for sale.

18" 7/12 JJ
+1.5 Inch Offest (I believe. I measured myself eyeballing it.)
5X 114.3
Trampio Tires 225/40/18
Approx 1 Year old with 5000 miles on them

They probably won't fit a S14 without spacers.
I special ordered them in Okinawa for my Mark II JZX90.
They are in VA now.

If there is any serious interest I can put them on my S14 as I have spacers and put up pictures.


Picture 1 (http://www.motorworx.com/240sx/images/wheel1.jpg )
Picture 2 (http://www.motorworx.com/240sx/images/wheel2.jpg )
Picture 3 (http://www.motorworx.com/240sx/images/wheel3.jpg )
Picture 4 (http://www.motorworx.com/240sx/images/wheel4.jpg )
Picture 5 (http://www.motorworx.com/240sx/images/wheel5.jpg )
Picture 6 (http://www.motorworx.com/240sx/images/wheel6.jpg )