ESCAPE!
10-29-2016, 04:56 PM
Bought these on yaj a few years ago with plans of making some lexan lenses for them but never ended up running them. Not sure who they were made by.. They were listed on yahoo as ``R-Magic 180sx Headlights``. Its possible the lights themselves are from an R-Magic kit but as far as i know they only made RX-7 parts, so not sure about the housings
One of the rubber dust boots is missing off of one light and there is some rust on the mounting springs. Not sure if bulbs will need replacing or not
$450 plus shipping
https://c2.staticflickr.com/6/5454/30648978665_c9c6cb785d_z.jpg
https://c2.staticflickr.com/6/5727/30017448064_e8edbd02dc_z.jpg
https://c2.staticflickr.com/6/5721/30017439094_512aa63d9e_z.jpg
I know flush lights with covers seem to be more desireable but covers could easily made for these lights as well. Or run them how they are now!
Here are my AB Flug lights i made covers for with just a heatgun, angle grinder and a drill.
https://c2.staticflickr.com/8/7111/26980575145_07780b90bc_z.jpg
One of the rubber dust boots is missing off of one light and there is some rust on the mounting springs. Not sure if bulbs will need replacing or not
$450 plus shipping
https://c2.staticflickr.com/6/5454/30648978665_c9c6cb785d_z.jpg
https://c2.staticflickr.com/6/5727/30017448064_e8edbd02dc_z.jpg
https://c2.staticflickr.com/6/5721/30017439094_512aa63d9e_z.jpg
I know flush lights with covers seem to be more desireable but covers could easily made for these lights as well. Or run them how they are now!
Here are my AB Flug lights i made covers for with just a heatgun, angle grinder and a drill.
https://c2.staticflickr.com/8/7111/26980575145_07780b90bc_z.jpg