bks14sr
10-25-2016, 05:02 PM
Testing waters on sale:
Straight to the point, checking potential of selling car as is with what I believe is a spun rod bearing. I just don't have time any more to fix/build further. Car is very nice otherwise and I have a lot of money into this. Have not skimped on parts anywhere. Details:
S14 Zenki chassis (paint still looks pretty good, only a few dings, no rust, straight car, new windshield)
Kirkey 4 point bolt in
Momo start seats (pretty shitty)
Crow cam lock harnesses
5 lug hubs
J30 diff
Tein flex coils
Battle version RUCA, front TC rods
Alum subframe spacers
R33 full brake setup w/350 track rotors, hawk pads, ebrake and z32 master
Volk GTV (fresh refinish) 19x9.5 +17, 10.5 +26, new Delinte 235/275 tires
S14 SR
Almost all new gaskets
Wiring specialties Upper/lower harness (almost new)
Wiring specialties injector harness (brand new)
CP 9:1 pistons
ARP headstuds
Comp Valve springs
Greddy RAS
2871r .86
OEM ex mani flanged w/ Tial 38mm and dump
Painted intake plenum
Painted/AN fitted valve cover
ECS Catch Can (new) w black braided lines/fittings
Apexi intake (new)
Z32 maf
Koyo rad
New radiator hoses
Dual fans
New Miata battery
Greddy intercooler and pipes w/new couplers and t clamps
Blitz BOV
AEM FPR w/gauge
New z32 fuel filter
Walbro 255
RS Enthalpy ecu
Apexi AVCR
Apexi Turbo timer
Tomei 740 injectors
Tomei 264 cams
Apexi GT spec exhaust
3" test pipe
Greddy down pipe
ACT 6 puck clutch
Will add parts as I remember.
Would sell as is for $8500
If not, I will either leave this in my garage and rebuild later or eventually part out and make more money than the asking.
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3136_zpsgmnmhybm.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3137_zpsybklbktk.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3117_zpszx5bf9p9.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3138_zps7mnffeoj.jpg
Straight to the point, checking potential of selling car as is with what I believe is a spun rod bearing. I just don't have time any more to fix/build further. Car is very nice otherwise and I have a lot of money into this. Have not skimped on parts anywhere. Details:
S14 Zenki chassis (paint still looks pretty good, only a few dings, no rust, straight car, new windshield)
Kirkey 4 point bolt in
Momo start seats (pretty shitty)
Crow cam lock harnesses
5 lug hubs
J30 diff
Tein flex coils
Battle version RUCA, front TC rods
Alum subframe spacers
R33 full brake setup w/350 track rotors, hawk pads, ebrake and z32 master
Volk GTV (fresh refinish) 19x9.5 +17, 10.5 +26, new Delinte 235/275 tires
S14 SR
Almost all new gaskets
Wiring specialties Upper/lower harness (almost new)
Wiring specialties injector harness (brand new)
CP 9:1 pistons
ARP headstuds
Comp Valve springs
Greddy RAS
2871r .86
OEM ex mani flanged w/ Tial 38mm and dump
Painted intake plenum
Painted/AN fitted valve cover
ECS Catch Can (new) w black braided lines/fittings
Apexi intake (new)
Z32 maf
Koyo rad
New radiator hoses
Dual fans
New Miata battery
Greddy intercooler and pipes w/new couplers and t clamps
Blitz BOV
AEM FPR w/gauge
New z32 fuel filter
Walbro 255
RS Enthalpy ecu
Apexi AVCR
Apexi Turbo timer
Tomei 740 injectors
Tomei 264 cams
Apexi GT spec exhaust
3" test pipe
Greddy down pipe
ACT 6 puck clutch
Will add parts as I remember.
Would sell as is for $8500
If not, I will either leave this in my garage and rebuild later or eventually part out and make more money than the asking.
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3136_zpsgmnmhybm.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3137_zpsybklbktk.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3117_zpszx5bf9p9.jpg
http://i1329.photobucket.com/albums/w554/bkrupp1/Mobile%20Uploads/IMG_3138_zps7mnffeoj.jpg