PDA

View Full Version : MA '95 240SX, KA24DE 5 speed


phunc
10-11-2016, 07:31 PM
Hi everyone, selling a 1995 240SX. 5 Speed swapped. Runs and drives. Engine seems strong.
Bought this car with the intention of a mini restoration but other priorities dictate the sale of this car. When I received it the front end was in pretty rough shape. I replaced the fenders, bumper cover, radiator support and bumper itself. The damage didn't seem bad but I had a spare radiator support that was in mint shape. I replaced the engine harness and main harness, so everything is working properly now (exterior lights, etc). The engine fires right up but will need the exhaust corrected, P/O put an aftermarket header but didn't seal it properly. There is JB weld or similar in one of the stud holes so that will need to be addressed.
The body is in OK shape. I took pictures of the trouble areas. The rear quarter panels have some damage and there are dents here and there. As of now the trunk has nothing to latch to; P/O removed the entire latch assembly. I have a spare I will swap in unless it sells before that. (can include if that's the case) When I received the car, the trunk was fastened to the quarter panels with some strapping. The holes are left there, see pictures.
Car is 5 speed swapped, shifts smooth, no issues there. Speedo and temp gauge don't work.
I replaced most of the interior so it is pretty clean, but it is missing the headliner.
I have the matching red hood to go with it, just need to find a way to get it to my house.

Car isn't awful, it would make a great track or project car, I just don't have the funds to get it there right now.

Clean title in hand.
Looking to get $1500 for it.
http://i.imgur.com/P1gjjiJ.jpg?1
http://i.imgur.com/m6gaOVD.jpg?1
http://i.imgur.com/mbvTYJ6.jpg?1
http://i.imgur.com/lwwQDsg.jpg?1
http://i.imgur.com/8uH6zYG.jpg?1
http://i.imgur.com/FMwZLCU.jpg?1
http://i.imgur.com/6BBzCTc.jpg?1
http://i.imgur.com/sIj0KWe.jpg?1
http://i.imgur.com/eEdmyKz.jpg?1
http://i.imgur.com/81S4kFW.jpg?1
http://i.imgur.com/ocYDbs1.jpg?1
http://i.imgur.com/4vy3FHh.jpg?1
http://i.imgur.com/eFuVUtP.jpg?1
http://i.imgur.com/QiLUC71.jpg?1
http://i.imgur.com/GvuL0ZI.jpg?1
http://i.imgur.com/qzBxdVs.jpg?1
http://i.imgur.com/SZCRPvz.jpg?1
http://i.imgur.com/RdDG1sq.jpg?1
http://i.imgur.com/fdvoMuL.jpg?1
http://i.imgur.com/d8Q50KC.jpg?1
http://i.imgur.com/P1gjjiJ.jpg?1
http://i.imgur.com/HURIcDL.jpg?1
http://i.imgur.com/4RhHkaM.jpg?1
http://i.imgur.com/lOVwT6p.jpg?1
http://i.imgur.com/fuqXwAt.jpg?1

1classyg35
10-12-2016, 09:31 PM
Sent you a PM

phunc
10-17-2016, 08:39 AM
Still available

phunc
10-19-2016, 12:29 PM
Price drop, $1500 OBO!!

DSMTraitor
10-19-2016, 02:37 PM
PMd an offer.

phunc
10-27-2016, 10:13 AM
hole in the driver side right behind the seat where they all rust. it isn't awful but it is a hole
other than that, there is nothing major as far as rust and rot is concerned.
Thanks

NickMedic
11-01-2016, 07:34 PM
Still available?

Goodfellow
11-02-2016, 12:03 AM
PM me im intrested

phunc
11-02-2016, 06:40 AM
Part out going on here:
http://zilvia.net/f/showthread.php?t=637399