Sr20 greddy oil pan, bee*R rev limiter

[NJs13_1993]

I have a greddy oil pan for sale. No cracks or major damage. It has a few scrape marks on the bottom. Also someone stripped the drain plug hole but it was repaired and works properly now
$200
http://uploads.tapatalk-cdn.com/20161011/64a9ccb3fb6038fe4f4ce74669623811.jpg
http://uploads.tapatalk-cdn.com/20161011/ac5de88941eb4ac52b32935529c5aff0.jpg

I also have a legit bee*R rev limiter ordered from RHDjapan. I did 1 lap with it and broke 2 rocker arms because I didn't listen to the Internet. NOT RECOMMENDED FOR USE ON SR. You've been warned. Otherwise it's in perfect condition. Comes with instructions, sticker, and electrical connectors that came with it.
$200
http://uploads.tapatalk-cdn.com/20161011/adbc0d33ac667a626391683308abfcec.jpg


Sent from my iPhone using Tapatalk

[NJs13_1993]

Bump
Msglngth

[S14sti]

That bee r is just meant for shooting flames in neutral it is not used for the track you def learned that hardway! haha

[xchaosx]

pm'ed~~~~~

[NJs13_1993]

Buuuuuuump

[serah31500]

You have all the proper bolts for the oil pan?

[NJs13_1993]

I have the 4 long ones definitely but I should have the rest of them

[RB25GUY]

no way that your SR just blew because the Limitter! Did you properly check how to set it up like gain wise? i put money you had the gain at the highest setting, to make the coolest flames, operators fault not the limitters, did you even read instructions? people tend to set these up and just wing it which is also a no-no.

[RB25GUY]

these guys havent blown up, since you literally took it out for 1 lap and blew up i think it was another cause... im a Bee r distributor so i can tell you i know tons of sr cars with these and have no problems

WXspUuqj3FU

KDdY1H-JZIo

[NJs13_1993]

I didn't blow the motor, it broke 2 rocker arms which everything I read said it would. I had the gain set low because I didn't want big flames of tons of obnoxious noises. I just wanted to keep the rpms at a proper range without having to pussy foot through the track. I did a ton of research on sr's with bee-r's installed and basically everyone said you'll break rocker arms and don't set the gain high. Rev limit was set to 7000 and gain was on 4 if I remember correct.

[NJs13_1993]

Also before you ask the head has poncams, tomei type A springs, and BC titanium retainers

[NJs13_1993]

Bee*r is sold. Taking offers on the oil pan

[NJs13_1993]

Bump!! Pan is still for sale. Make offers

[NJs13_1993]

Bump oil pan still available

[240boosted]

Do you have all bolt for oil pan and you say stripped can I put a new nut on

[NJs13_1993]

Do you have all bolt for oil pan and you say stripped can I put a new nut on

Pm'd you. Let me know

[Nissan2nr22]

Had BRs on all my SRs for long periods of time, never once had an issue, it was definitely something else

[sr20time]

You do know a proper ecu limits rpm righttttt lol

[NJs13_1993]

Doesn't matter now the bee-r is long gone

[Nissan2nr22]

Improper information matters.