Ignition Switch wiring to switch panel

[Stancyeze]

Just had some questions about wiring the ignition to my Moroso switch panel. I currently have the entire dash pulled and all the wiring exposed. I just need to know how to wire it, theres 5-6 wires coming from the main loom to the ignition switch. Just confused as to how to wire it to the switch panel switch...

[brndck]

wire the ignition wires to the ignition switch.

done? ok good

in the future, go get a haynes or chilton manual that has wiring diagrams, then look at the diagram for the ignition circuit. THEN, look at the instructions from the moroso panel, see what i'm getting at?

[Stancyeze]

wire the ignition wires to the ignition switch.

done? ok good

in the future, go get a haynes or chilton manual that has wiring diagrams, then look at the diagram for the ignition circuit. THEN, look at the instructions from the moroso panel, see what i'm getting at?

I've read the Moroso instructions. Like I said, there are 5 wires associated with the switch so it's not possible to hook them all up to the switch panel switch. There's only one prong on the switch panel switch.

[brndck]

I've read the Moroso instructions. Like I said, there are 5 wires associated with the switch so it's not possible to hook them all up to the switch panel switch. There's only one prong on the switch panel switch.

and like i said, you need a haynes manual or chilton manual to get the ignition switch wiring diagram. :picardfp:

[Stancyeze]

and like i said, you need a haynes manual or chilton manual to get the ignition switch wiring diagram. :picardfp:

The whole point of starting this thread was to see if anyone could had a diagram or could show me on their own car.

I understand the wiring schematic, what wires do what, but I can't figure out where to put the wires onto the switch panel to make them function.

[tuzzio]

The black wire with the white strip is the ONLY wire in an s13 chassos (if I recall correctly) that has power while cranking. So, i'd wire that to the switch and then from the switch to the starter

[Stancyeze]

The black wire with the white strip is the ONLY wire in an s13 chassos (if I recall correctly) that has power while cranking. So, i'd wire that to the switch and then from the switch to the starter

Okay and then what about Accesories(blue wire) and the ECU power(white/green wire). These two also need power when switching the ignition on.

[justinbyrant]

google is so easy to use, its almost like they want us to use it for something