MAD240SX
09-09-2016, 10:41 AM
Year: 1992
Make: Nissan
Model: 240SX
Price: NO LONGER FOR SALE
Trade: 73-74 Chevrolet C10 Short Bed (we will talk deal)
Location: Whittier, CA
Contact: Robert
I am looking for SERIOUS buyers, RESONABLE offers will be consider by my wife and I and LOW Ball offers will be ignored. We are in NO rush to sell this car; I have owned it for roughly 12 years. I will consider trade for a 73-74 Chevrolet C10 short bed and we will talk about a deal. I drove this car as a daily for two years looking like this to Lake Forest and back so it does have some wear and tear to the body from road debris and our crappy paved roads/highways. The car has been stored away since last November 2015 so it’s on Non-Operational status with DMV you just have to pay the registration fee which I think is $68 but you don’t have to worry about smog since it’s not up for that. There may be more parts I am missing to write down and I will try to get some photos of the engine bay and interior up. I can always send them over text.
Exterior
PPG Jet Black
TRA Kyoto Rocket Bunny Full kit
TRA Kyoto Rocket Bunny 30mm F/R over fenders
TRA Kyoto Rocket Bunny Spoiler
M-Sport vented fiberglass hood
Carbon Fiber roof spoiler
NEW S13 OEM Headlights
New S13 OEM Corner Lights
New S13 Amber/Clear bumper lights
New light harness
New 240/S13 OEM read side markers
New Origin taillights
S13 GTR grill
New side mirror glass inserts
New Front windshield w/trim
New Rear window w/trim
New wiper arms
Interior
Nardi Steering wheel
Boss hub
Quick release
Crow 5 point driver harness
Crow 4 point passenger harness
Sonic Motor Carbon fiber bucket seat (Driver)
Sonic Motor reclinable seat (passenger)
Mazworx harness bar
New power door locks
AEM digital wideband AFR gauge
VIPER alarm system w/GPS, tilt sensor, pressure sensor, motion sensor, door sensor and hood sensor
New A/C vents
New center bezel
New headlight & turn signal switch
New windshield wiper switch
Engine/Drivetrain
KA24DE w/ roughly 100K
White Bunny clutch w/flywheel (18K roughly)
AEM EMS standalone engine management system
Forcefab urethane engine mounts & transmission mount
Hot Shot header
Injen Intake (Modified)
Big bore throttle body
UAC cooling panel & headlight finish panel
Z32 fuel filter
Custom Exhaust with resonator and duel tip muffler
High flow catalytic converter
OS Giken 1.5 LSD
4.3 Ring & Pinion
Wheels/Suspension
Varrstoen ES2 (black finish)
• Front 18X9.5 -3
• Rear 18X10.5 +0
K Sport coilovers
Largus F/R sway bars
Circuit Sport rear sway bar end links
SPL Pro solid subframe bushings
SPL fender brace
Cusco tension rod
Power by Max rear upper control arms
Power by Max traction rod
Power by Max toe rod
VR Precision S13 subframe V2 brace w/T bar
Stealth Custom power brace
Ultra Racing 1pc (Solid) F/R strut bar
Custom Front Wilwood 6 piston caliper with 13” slotted rotor
Z32 brake master cylinder
Steel braided brake lines
ISIS 5 lug hub conversion
Not Installed
New Tein Z33 front inner tie rods
New DIF steering rack linkage bushing
New Energy polyurethane steering rack bushing
http://carphotos3.cardomain.com/images/0016/52/60/16332506_large.jpg
http://carphotos4.cardomain.com/images/0016/90/84/16360948_large.jpg
http://carphotos4.cardomain.com/images/0016/03/07/16363070_large.jpg?v=1
https://c7.staticflickr.com/6/5457/30207451406_2ede624f77.jpg
https://c7.staticflickr.com/6/5777/29611746174_6aa8fe423f.jpg
https://c7.staticflickr.com/6/5325/29611725294_df81555a5f.jpg
Make: Nissan
Model: 240SX
Price: NO LONGER FOR SALE
Trade: 73-74 Chevrolet C10 Short Bed (we will talk deal)
Location: Whittier, CA
Contact: Robert
I am looking for SERIOUS buyers, RESONABLE offers will be consider by my wife and I and LOW Ball offers will be ignored. We are in NO rush to sell this car; I have owned it for roughly 12 years. I will consider trade for a 73-74 Chevrolet C10 short bed and we will talk about a deal. I drove this car as a daily for two years looking like this to Lake Forest and back so it does have some wear and tear to the body from road debris and our crappy paved roads/highways. The car has been stored away since last November 2015 so it’s on Non-Operational status with DMV you just have to pay the registration fee which I think is $68 but you don’t have to worry about smog since it’s not up for that. There may be more parts I am missing to write down and I will try to get some photos of the engine bay and interior up. I can always send them over text.
Exterior
PPG Jet Black
TRA Kyoto Rocket Bunny Full kit
TRA Kyoto Rocket Bunny 30mm F/R over fenders
TRA Kyoto Rocket Bunny Spoiler
M-Sport vented fiberglass hood
Carbon Fiber roof spoiler
NEW S13 OEM Headlights
New S13 OEM Corner Lights
New S13 Amber/Clear bumper lights
New light harness
New 240/S13 OEM read side markers
New Origin taillights
S13 GTR grill
New side mirror glass inserts
New Front windshield w/trim
New Rear window w/trim
New wiper arms
Interior
Nardi Steering wheel
Boss hub
Quick release
Crow 5 point driver harness
Crow 4 point passenger harness
Sonic Motor Carbon fiber bucket seat (Driver)
Sonic Motor reclinable seat (passenger)
Mazworx harness bar
New power door locks
AEM digital wideband AFR gauge
VIPER alarm system w/GPS, tilt sensor, pressure sensor, motion sensor, door sensor and hood sensor
New A/C vents
New center bezel
New headlight & turn signal switch
New windshield wiper switch
Engine/Drivetrain
KA24DE w/ roughly 100K
White Bunny clutch w/flywheel (18K roughly)
AEM EMS standalone engine management system
Forcefab urethane engine mounts & transmission mount
Hot Shot header
Injen Intake (Modified)
Big bore throttle body
UAC cooling panel & headlight finish panel
Z32 fuel filter
Custom Exhaust with resonator and duel tip muffler
High flow catalytic converter
OS Giken 1.5 LSD
4.3 Ring & Pinion
Wheels/Suspension
Varrstoen ES2 (black finish)
• Front 18X9.5 -3
• Rear 18X10.5 +0
K Sport coilovers
Largus F/R sway bars
Circuit Sport rear sway bar end links
SPL Pro solid subframe bushings
SPL fender brace
Cusco tension rod
Power by Max rear upper control arms
Power by Max traction rod
Power by Max toe rod
VR Precision S13 subframe V2 brace w/T bar
Stealth Custom power brace
Ultra Racing 1pc (Solid) F/R strut bar
Custom Front Wilwood 6 piston caliper with 13” slotted rotor
Z32 brake master cylinder
Steel braided brake lines
ISIS 5 lug hub conversion
Not Installed
New Tein Z33 front inner tie rods
New DIF steering rack linkage bushing
New Energy polyurethane steering rack bushing
http://carphotos3.cardomain.com/images/0016/52/60/16332506_large.jpg
http://carphotos4.cardomain.com/images/0016/90/84/16360948_large.jpg
http://carphotos4.cardomain.com/images/0016/03/07/16363070_large.jpg?v=1
https://c7.staticflickr.com/6/5457/30207451406_2ede624f77.jpg
https://c7.staticflickr.com/6/5777/29611746174_6aa8fe423f.jpg
https://c7.staticflickr.com/6/5325/29611725294_df81555a5f.jpg