PDA

View Full Version : ND 1992 s13 hatch/purpose built drift car


senger
09-06-2016, 03:28 PM
Extensive build, mainly wanting to trade for a 350z. Will consider various rwd cars. Price is at $9,000. Will pretty much go anywhere to sell it.
Here's the things I can think of:
Exterior
-paint is rough, sun damage on the trunk, scratches, few dents, etc.
-have front bumper that got fucked up by a deer, side skirts(passenger side got ripped in half from a rogue tire) and rear bumper. All of the fiberglass looks like ass but it's there if you want it

Interior
-it has a dash, driver seat(kirkey) with a 5 point harness, passenger NRG seat that isn't bolted down yet
-oil pressure, voltage, tach, boost, water temp, A/F gauges
-mount for a hydraulic handbrake
-full roll cage built by Hart Attack racing(dude builds dirt track chassis)

Engine
-fully built blacktop sr20
-can dig up the specs and tell more about the build if interested, off the top of my head it has hks 272 cams, bored just passed factory specs, forged pistons and rods, etc. unsure of the exhaust manifold brand but the turbo is an AirResearch t04
-tuned by rsenthalpy, but would benefit from a dyno tune. Around 18lbs of boost should be making 400hp

Suspension and everything else
-Dirty Love angle kit
-Islamic state tension rods, could use some better ones but the work fine for the most part
-front sway bar is none existent
-K sport coilovers that have seen better days. I believe the front two are blown butt fuck it.
-welded diff, solid subframe bushings
-300zx brakes everywhere, dual calipers in the back with the maverick motor sports mounts, need to run brake lines to the calipers though, 300zx bmc
-tubed front end
-custom wiring harness

Idk definitely forgetting some shit. Will come with some extra parts I have laying around.
https://imageshack.us/i/pnClmTAwj
https://imageshack.us/i/poltMgyXj
https://imageshack.us/i/pnbTpeFOj
https://imageshack.us/i/po8A0gtyj
https://imageshack.us/i/pmS2GYbuj
https://imageshack.us/i/pnKdu8zwj

gamedayxice
09-07-2016, 09:15 PM
is it still for sale?

senger
09-08-2016, 06:29 AM
Yes sir, still for sale

kalawah
09-11-2016, 07:14 PM
craigslist is gone, where are the pics?

senger
09-11-2016, 07:22 PM
craigslist is gone, where are the pics?

http://nd.craigslist.org/cto/5777488040.html

snosk8tr123
09-13-2016, 10:28 AM
Do you mind posting current pics

senger
09-13-2016, 11:50 AM
Do you mind posting current pics

Pics posted, lets get this thing sold. Will pretty much bring it anywhere.

snosk8tr123
09-13-2016, 02:17 PM
Nice car and I appreciate the built motor but I believe your price is quite high. Especially with blown suspension, a welded diff, and all the additional work/replacements that are needed.

senger
09-13-2016, 03:53 PM
Nice car and I appreciate the built motor but I believe your price is quite high. Especially with blown suspension, a welded diff, and all the additional work/replacements that are needed.

Thank you. I guess I am looking at it like the car was roughly 4k, the cage was 3k, tubed front end/intercooler piping was 1.5k, the engine build was 4.5k, angle kit and bits and pieces adds up to another 1k. I understand your thought though, I appreciate it. What do you think would be a fair price?

snosk8tr123
09-13-2016, 04:46 PM
Thank you. I guess I am looking at it like the car was roughly 4k, the cage was 3k, tubed front end/intercooler piping was 1.5k, the engine build was 4.5k, angle kit and bits and pieces adds up to another 1k. I understand your thought though, I appreciate it. What do you think would be a fair price?

I PM'd you!