Ka-t I Just Can Catch A Break

[nd240sx3]

ok well i posted a few weeks ago on my t3/t4 turbo not fittin with ssautochrome mani. it hits the brake master cylinder. well i researched and found that someone had the same prob and had an adaptor flange made.. well when i had machinist make it for me i forgot to take into consideration that the motor sits on an agle and the flange is just a lil short.. so now the mc is just under a 1/4 inch to long which i have the abs, so i thought about replacing with non abs but i found out that its the same length so that wont work, well anyway i researched a lil more and found out that i might be able to put a spacer behind one of the mc bolts and have the mc on an angle so if someone has any advice let me know. also if the spcer helps but just isnt enough i was goin to try to dremil the mc a lil bit to get the neccesary clearance, well anyway i am goin to try the spacer tommorrow and see where that gets me.. so i hope someone can give me advice and or help me out thanx for reading this hope to hear from someone soon by the way abs mc is 6 inches exactly so if someone has non abs measure to be sure for me thanx

[sr240mike]

Im pretty sure the mc is larger with abs. What year is your car again?

[nd240sx3]

the year of my 240sx is 91

[Powashiftin]

lucky for you, I have the link

http://www.zeroyon.com/pics/installs/clutchlinemod/clutchlinemod.html

[nd240sx3]

thats a clutch line not brake i am havin probs with brake master cylinder being to long which has absolutly nothin to do with the link u posted

[mrmephistopheles]

I think he posted that in the wrong thread.

You can't put your MC at an angle, as the rod that pushes out of the booster goes straight out.

[Jeff240sx]

Capitalization and punctuation. Please. I can't tell where one thought begins and the other ends. I'd advise you read the two recent grammar threads.
-Jeff

[nd240sx3]

omgicantbeliveyouactuallycalledmeoutforspellingbad lyandnotusingpunctuationorcapitalizationitssowrong youranassholeomg
ithinkishouldbeabletobeanidiotonyourforumsandaskqu estionswithoutthinkingaboutthefactsomeoneneedstore adthisshitimtypinginordertohelpme

Yea. You got moderated. If you have shit to say, PM me. Don't start a whole other thread in OT about it.
-Jeff

[wootwoot]

noooo, wrongggg... shhhhh

[nd240sx3]

huh? whats that suposed to be

[240Stilo]

That's supposed to be funny...which it was. Besides that, when you want someone to help you, you want them to understand what your problem is. If it's hard for them to decipher what you're trying to tell them them how can they help you? That's why grammar comes in, so we can better help you.

[nd240sx3]

but this one really isnt that bad. the first couple replies, obviously could understand it cause they replied soooooo

[240Stilo]

The first two were feeling nice enough to take a hard look at that block of letters to know what you're saying. But, as they said before tilting the brake MC is probably not your best option.

[nd240sx3]

and found out the non abs brake booster is 1.5" smaller then abs. so i am goin to get one out of a j yard, and use with my abs mc. hopefully that will work. i thank the people that took the time to read my mess and helped me out

[statik]

your posts hurt my brain...

[kandyflip445]

I think by the time you get done with all the buying of parts you'll spend as much as a mani that would have fit... I guess you get what you pay for.