View Full Version : Getting slammed
jared420sx
08-31-2016, 03:02 PM
I have just about every "bolt on" suspension piece available. But i want to be extremely low whole still maintaining some form of function. That being said what are some things that i can do that will help me in my pursuit of lowness.
Ive seen things like floorpans being channeled and lifted things like that.
i dont know much about the realm of these mods so any suggestions, ideas expierences would be kool. Also i have the spl bushing kit any suggestions on what shim setup i should use? Thanks (^o^)/
tuzzio
08-31-2016, 03:21 PM
just sell the fuckin car.
brndck
08-31-2016, 03:22 PM
just sell the fuckin car.
:kiss::kiss::kiss::kiss::kiss::kiss::kiss::kiss::k iss::kiss::kiss:
jared420sx
08-31-2016, 03:24 PM
just sell the fuckin car.
I would if i wasnt conjoined with it at birth.
jared420sx
08-31-2016, 03:25 PM
I would if i wasnt conjoined with it at birth.
Could someone just spoon feed me information here i plan on tubbing the front but curious on other mods i can do.
SoundEfx
08-31-2016, 03:33 PM
Could someone just spoon feed me information here i plan on tubbing the front but curious on other mods i can do.
Well done.
Straight to the point.....
JM216S14
08-31-2016, 03:34 PM
Could you post pics of the tubs in the diw thread when you're done?
Thanks!!
jared420sx
08-31-2016, 03:38 PM
Could you post pics of the tubs in the diw thread when you're done?
Thanks!!
If you think i will be the one welding them you are more retarded then you thought i was.
jumpman2334
08-31-2016, 03:58 PM
But i want to be extremely low whole still maintaining some form of function.
I am not sure if you understand how this program works.
With that said. I will be 'getting slammed' after work.
OutlawLui
08-31-2016, 04:11 PM
....
..
..
.
.
.
:picardfp:
Hockey pucks for springs will get you to the low low....
jared420sx
08-31-2016, 04:30 PM
Hockey pucks for springs will get you to the low low....
I already have broadway statics w 4in springs so i think im good. Atleast someone is trying to be helpful ヽ(;▽;)ノ if anyone else knows about floorpan lifting and channeling and what shim setup i should run for my subframe please let me know!
pacotaco345
08-31-2016, 05:07 PM
just set everything full low. you won't have to do any floorpan bullshit, the ground will grind it out from underneath you. same with your oilpan and bellhousing
brndck
08-31-2016, 05:14 PM
just set everything full low. you won't have to do any floorpan bullshit, the ground will grind it out from underneath you. same with your oilpan and bellhousing
Where can I buy that oil pan delete mod???
pacotaco345
08-31-2016, 05:25 PM
Where can I buy that oil pan delete mod???
Im sure OP would be more than happy to point you towards where he bought his broadway static coilovers with 4" springs and 1.5" of stroke.
Sent from my iPhone using Tapatalk
Gar9854
08-31-2016, 06:42 PM
You keep saying floor pan like its not a unibody car. You cant just body drop these things.. but find interior pics of the review 180sx. Go google it. Get off the tit and look for your own information
cotbu
08-31-2016, 07:29 PM
I read every reply! I feel like I'm home.
#makezilvia.netgreatagain
jared420sx
08-31-2016, 07:46 PM
You keep saying floor pan like its not a unibody car. You cant just body drop these things.. but find interior pics of the review 180sx. Go google it. Get off the tit and look for your own information
Thats where im drawing all this inspiration from http://www.speedhunters.com/2014/03/hiroshima-hero-meet-japans-wildest-s13/ I was gonna post the link earlier. And sorry id rather try here first than go to fucking http://www.jalopyjournal.com and sift throw old white ppl fondling there hot rods.
jared420sx
08-31-2016, 07:47 PM
"Getting slammed" AHAHAHAHAHA
Gar9854
08-31-2016, 07:48 PM
Well old white men have spoon fed in their distant past. It wont happen here.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Primo's Silvia
08-31-2016, 07:55 PM
just set everything full low. you won't have to do any floorpan bullshit, the ground will grind it out from underneath you. same with your oilpan and bellhousing
This ^ made my day thank you sir
hanzbrady
08-31-2016, 08:30 PM
Now don't get offended as I don't know you, but do you have the talent or the bank account to take on something like that speedhunters car? Because if you don't please don't start a build, hack a chassis to oblivion, and then part it out to build a Subaru.
1988montecarloss
08-31-2016, 08:35 PM
Now don't get offended as I don't know you, but do you have the talent or the bank account to take on something like that speedhunters car? Because if you don't please don't start a build, hack a chassis to oblivion, and then part it out to build a Subaru.
*drive a subaru and build a sick vape rig
turn down coils as far as you want, hit anything that rubs with a big hammer until it doesnt, let it scrape
/rocket science
Bnr32gtr
09-01-2016, 01:35 PM
I think the reason he channeled/body dropped cuz he is not running a drop knuckle and was trying to improve suspension geometry without raising the car. Drop knuckles cost around 1000 bucks if you have the know-how and a welder you could channel/body drop the car for basically nothing just your time a lot of time. But what do I know
TheRealSy90
09-01-2016, 01:46 PM
Learn how to weld.
Relocate the front and rear subframes higher up in the chassis like old JGTC cars.
Chop the chassis rails down.
Done.
LockOn!
09-01-2016, 01:54 PM
Could someone just spoon feed me information here i plan on tubbing the front but curious on other mods i can do.
Okay this got me to lol so here ya go.
Coilovers, your choice, doesn't matter. Remove all the collars except the spring support and droop spring in the rear if need be.
Arms that clear the other arms at shitty angles.
Drop knuckles.
Shits fucking easy.
https://s-media-cache-ak0.pinimg.com/236x/24/ba/1a/24ba1adf111ae29359c91e6e33dbbc0a.jpg
There. Tiny tiny spoonful for you. Now get out.
Sleepy_Steve
09-01-2016, 07:19 PM
Now get out.
Yeah, that ^ shit... I don't know what bolt ons OP has or doesn't have.
But coils, and arms should be able to get the car low low if you're not retarded. But this is the internet so I'm putting that as 80-20 against.
Drop knuckles will fix most of the geometry, but there may also be some steering stuff to deal with. Try flipping the tie rods if you're a broke ass peasant.
El-Cheapo roll center correction would be riser rear subframe bushings + an air hammer on the frame for RUCA clearnace, and a GKtech roll center correction kit on the front.
Rich260z
09-02-2016, 11:50 AM
I love coming back to zilvia every now and then and seeing stuff like this
tuzzio
09-02-2016, 12:32 PM
just sell the fuckin car.
Quoting myself for truth
Why do you care about raising the floor when the frame rails sit below them? Also, that schmuck isn't even low, bitch aint even tucking.His fitment sucks to. Fight me.
rawgarage
09-02-2016, 12:43 PM
I came here...for laughs....I am satisfied
jedi03
09-02-2016, 03:00 PM
Cut the body skin off, build a full tube body then put the skins on it and call it a day!
travon47
09-02-2016, 03:34 PM
Thats where im drawing all this inspiration from http://www.speedhunters.com/2014/03/hiroshima-hero-meet-japans-wildest-s13/ I was gonna post the link earlier. And sorry id rather try here first than go to fucking http://www.jalopyjournal.com and sift throw old white ppl fondling there hot rods.
If you are getting soooo much inspiration from this car, then you don't have to be slammed. the rocket bunny body kit makes a stock ride height car look slammed. so there you go. buy a body kit and you are good to go bro.
justinbyrant
09-07-2016, 04:22 PM
Could someone just spoon feed me information here i plan on tubbing the front but curious on other mods i can do.
do you have 10k to invest in suspension work and custom shit? no then I will spoon feed it to you
go to craigslist
start an account
start a for sale add titled, my shitty 240 I once had dreams of slamming like it was a mini truck except im not nearly brown enough, or fat and white enough to be able to build a mini truck
post for $1500
sit back and wait for someone to get ahold of you
sell car for $800
problem solved
in all seriousness there is no such thing as super low and functional, ever wonder why you don't see stanced cars on track? why are racecars never tucking rim? and if they are they have more money in suspension r&d than you will ever have in your whole car
and if for some reason you insist on pursuing this idiotic dream without using a kit to give the illusion of lowness like all the super jdm ricer drift bois who "only street drift cause its cooler" yet only post pictures of their super jdm sticker bombed sil80 oniva s17.5 hard parked like a boss at the nearest super market, you could remove the springs entirely, I did see one car that someone had done that to before flying off the road rolling their car and taking out a tree because they had nothing keeping them on the road and while your at it you should do suicide doors and one of those neat trunk mods so it opens up from either the left or the right side instead of from the back would look totally killer dude
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.