600whp+ ka24de partout and misc

[S13alldayyo]

600+ KA24de PARTOUT LEFTOVER PARTS STILL ALOT
---------------------------------------
PRICES ARE BEFORE SHIPPING
---------------------------------------
CUSTOM INTAKE MANIFOLD WITH TOPFEED FUEL RAIL - 650$
--------------------------------------
FULL BRIANCROWER HEAD

HEAD NEEDS VALVE ANGLE JOB FOR ASSEMBLY IT IS READY FOR THE BIGGER VALVES

BRIAN CROWER STAGE 3 CAMS
BRIAN CROWER DUAL VALVE SPRINGS AND RETAINERS
BRIANCROWER OVERSIZED INTAKE AND EXHAUST VALVES
NEW VALVE SEALS SUPERTECH

HEAD HAS PORT N POLISH ON EXHAUST AND IS CLEARENCED FOR THE BIG LOBES ON THE STAGE 3 BC CAMS

- 1250$
----------------------------------------------
BLOCK
.020 OVERSIZED CP PISTONS WISECO STOCK CR

MANLEY RODS

M11 HEADSTUDS ARP (STOCK IS M10)

STOCK CRANK MICRO POLISHED

(Forgot the bearings I bought but they are either clevite or acl )

****** block needs to be assembled, block Is ready for assembly, block has been tapped for m11 studs (40+psi boost capable studs),
Block has been bored and Pistons are labeled per cylinder as each piston ring is already gapped, literally ready to assemble and go!

1300$

-------------------------------------------
OSK TIMING SET 125&
-------------------------------------------
NEW TOUGH ONE ALTERNATOR (advance autoparts) 70$
-------------------------------------------
I will add anything else I catch later on thank you
786-879-6174
Brian
http://uploads.tapatalk-cdn.com/20160826/6124a1745f328deeddda369a64ad6ef9.jpghttp://uploads.tapatalk-cdn.com/20160826/5ecb9039458cd5d2ed0bccfe6b4e83c3.jpghttp://uploads.tapatalk-cdn.com/20160826/455db31ded743c4fbc69efedb87a457f.jpghttp://uploads.tapatalk-cdn.com/20160826/de3c30243812b85353f61f677d5cd4be.jpghttp://uploads.tapatalk-cdn.com/20160826/abefd92aa9b41a6bda70360d8c93fb4b.jpghttp://uploads.tapatalk-cdn.com/20160826/f14b032aa48df90daa711fc54a867f76.jpghttp://uploads.tapatalk-cdn.com/20160826/390caaa451cd0174229c50283be3a929.jpghttp://uploads.tapatalk-cdn.com/20160826/113d93d7d71fe99e40f87d6ef02913cc.jpghttp://uploads.tapatalk-cdn.com/20160826/3049276f35d81f686c2c4cc72d6b818e.jpghttp://uploads.tapatalk-cdn.com/20160826/6c9335287d902a2cb8fd3a6e74590251.jpghttp://uploads.tapatalk-cdn.com/20160826/7c22ca75c0d4f8c9c8dbe47d1eb80834.jpghttp://uploads.tapatalk-cdn.com/20160826/24c67867328c078d226053b2cd258143.jpghttp://uploads.tapatalk-cdn.com/20160826/246e4ccbdfcbc0e4e48ed6612b2f2e14.jpghttp://uploads.tapatalk-cdn.com/20160826/d9d5cc86b1646aaa9e4e240fce25d198.jpghttp://uploads.tapatalk-cdn.com/20160826/3c45c84fc1da31ef831a1b6a298c3e30.jpghttp://uploads.tapatalk-cdn.com/20160826/2a3a1249e3a4f848946a9186a137558b.jpghttp://uploads.tapatalk-cdn.com/20160826/75afd0c3bc01843910607d766f6e8d7e.jpghttp://uploads.tapatalk-cdn.com/20160826/1bc53f697c4cb13a34c850f1ebc781f6.jpg





Sent from my iPhone using Tapatalk

[S13alldayyo]

Also have oil pump OEM with only 2k miles its still new inside cheap price of 100$ bump


Sent from my iPhone using Tapatalk

[S13alldayyo]

Bump intake manifold is gone


Sent from my iPhone using Tapatalk

[S13alldayyo]

Up


Sent from my iPhone using Tapatalk

[tuzzio]

Curious what you were running for an ignition on this. Coilpacks?

[S13alldayyo]

Ls coils, bump


Sent from my iPhone using Tapatalk

[KOUKIboy]

That is a monster set up!!! ? Where did you have the manifold made?? Glws...

[S13alldayyo]

I bought it second hand, so I don't know who made the manifold, I did polish the runners to make it match the polish ple u look so it almost looks like a full custom


Sent from my iPhone using Tapatalk