TheRealSy90
08-23-2016, 08:16 PM
PM or Text 928-261-6932.
Looking to sell my rare Trust/Greddy mid-mount, unequal length, octopus style, sr20 TD06 turbo manifold.
This manifold has been modified to CLEAR LHD CHASSIS with a 38mm vband wastegate outlet. The wastegate is also now in-flow of the exhaust for better boost control, and not on a long stand off runner opposite the flow of the exhaust like they come originally.
If you don't want the 38mm wastegate flange I'll happily remove it and keep it for my next setup.
Pic before any lhd wastegate modification.
http://uploads.tapatalk-cdn.com/20160824/f997bf636d0fe8104a277dafe04760c7.jpg
http://uploads.tapatalk-cdn.com/20160824/547586658c27450d6550459b0d051225.jpg
Wastegate relocated for better boost control and to clear lhd chassis. Flange changed to 38mm.
http://uploads.tapatalk-cdn.com/20160824/cbc085930c31dc97db00adf64260fc38.jpg
http://uploads.tapatalk-cdn.com/20160824/4e12ca276691c1620e0bdd68b09f6390.jpg
http://uploads.tapatalk-cdn.com/20160824/1d822b6b25f15de7938a3e767845b63b.jpg
I also have a custom made 3" downpipe for this manifold setup, to clear the steering shaft, manifold, and firewall on a lhd chassis, it's an extremely tight fit and had to be custom made. Downpipe has bracing that bolts to the sr20 engine block. Has a 2.5" V band to the turbo, 2.5"-3" taper right after the v band. Downpipe would be cut where it turns under the floorboard.
http://uploads.tapatalk-cdn.com/20160824/b58d023a611c830998bf2f5d259f3f7c.jpg
If someone wants it, I'll even include the td06h 8cm turbine housing off my turbo, with v band flange welded on to mate to the downpipe.
Asking $sold for manifold, turbine exhaust housing, and downpipe section.
$sold for just the manifold alone.
MANIFOLD IS SOLD!
I will ship this stuff anywhere you please.
PM, or text 928-261-6932.
Also, looking to sell my set of AUS Injection 1000cc sr20 sidefeed injectors. These are NOT re-drills like every other 1000cc sidefeed I've seen. They ARE flow matched as a set. These are nearly brand new and only have a couple minutes of idle time. Come installed in a stock rail with Tomei fpr adapter fittings. Can include a stock fpr as well. These fit OEM injector plugs!
Injector caps have allen head bolts upgrade.
Check out www.ausinjection.com and see the quality stuff they offer. Made here in the USA in Tempe, AZ.
Asking $450 for injectors/rail/fittings.
http://uploads.tapatalk-cdn.com/20160824/479e53ae53cb0374bedff2ae3d0f28b4.jpg
http://uploads.tapatalk-cdn.com/20160824/4da0aa5039c3357ff95074dd31614ae6.jpg
Sent from my iPhone using Tapatalk
Looking to sell my rare Trust/Greddy mid-mount, unequal length, octopus style, sr20 TD06 turbo manifold.
This manifold has been modified to CLEAR LHD CHASSIS with a 38mm vband wastegate outlet. The wastegate is also now in-flow of the exhaust for better boost control, and not on a long stand off runner opposite the flow of the exhaust like they come originally.
If you don't want the 38mm wastegate flange I'll happily remove it and keep it for my next setup.
Pic before any lhd wastegate modification.
http://uploads.tapatalk-cdn.com/20160824/f997bf636d0fe8104a277dafe04760c7.jpg
http://uploads.tapatalk-cdn.com/20160824/547586658c27450d6550459b0d051225.jpg
Wastegate relocated for better boost control and to clear lhd chassis. Flange changed to 38mm.
http://uploads.tapatalk-cdn.com/20160824/cbc085930c31dc97db00adf64260fc38.jpg
http://uploads.tapatalk-cdn.com/20160824/4e12ca276691c1620e0bdd68b09f6390.jpg
http://uploads.tapatalk-cdn.com/20160824/1d822b6b25f15de7938a3e767845b63b.jpg
I also have a custom made 3" downpipe for this manifold setup, to clear the steering shaft, manifold, and firewall on a lhd chassis, it's an extremely tight fit and had to be custom made. Downpipe has bracing that bolts to the sr20 engine block. Has a 2.5" V band to the turbo, 2.5"-3" taper right after the v band. Downpipe would be cut where it turns under the floorboard.
http://uploads.tapatalk-cdn.com/20160824/b58d023a611c830998bf2f5d259f3f7c.jpg
If someone wants it, I'll even include the td06h 8cm turbine housing off my turbo, with v band flange welded on to mate to the downpipe.
Asking $sold for manifold, turbine exhaust housing, and downpipe section.
$sold for just the manifold alone.
MANIFOLD IS SOLD!
I will ship this stuff anywhere you please.
PM, or text 928-261-6932.
Also, looking to sell my set of AUS Injection 1000cc sr20 sidefeed injectors. These are NOT re-drills like every other 1000cc sidefeed I've seen. They ARE flow matched as a set. These are nearly brand new and only have a couple minutes of idle time. Come installed in a stock rail with Tomei fpr adapter fittings. Can include a stock fpr as well. These fit OEM injector plugs!
Injector caps have allen head bolts upgrade.
Check out www.ausinjection.com and see the quality stuff they offer. Made here in the USA in Tempe, AZ.
Asking $450 for injectors/rail/fittings.
http://uploads.tapatalk-cdn.com/20160824/479e53ae53cb0374bedff2ae3d0f28b4.jpg
http://uploads.tapatalk-cdn.com/20160824/4da0aa5039c3357ff95074dd31614ae6.jpg
Sent from my iPhone using Tapatalk