racepar1
08-22-2016, 10:37 PM
Let's start with the Mishimoto radiator for S13 with a KA or CA. The radiator is in good shape. No leaks, no damage, not full of rust. Radiator cap included.
The fans are Nissan Altima fans that are trimmed to fit in an S13 and mount to an S13 KA/CA radiator. The fans could be used on an SR radiator as well, you would just need to trim around the upper radiator hose. The fan setup also includes wiring for an S13 chasis. Both fans have relays and fuses, one fan is controlled by a temperature switch, the other by a manual switch in the dash. All wiring connections/locations are marked on the components so installation should be a breeze. You don't have to be any sort of wiring guru to install it, just familiar with very basic wiring. This fan setup will not work with air conditioning, It would require additional trimming and some minor modification to the wiring. I can provide a switch to put in the dash, but I don't have the temperature switch for it. It simply uses the stock temperature switch that can be found in the lower radiator hose of any singlecam 240 that came with air conditioning. The mounting hardware for the fan shroud is all included as well, bolt-on, no e-fan zip-ties.
Radiator: $125
E-Fans: $80
BOTH: $190
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3248_zpskwt59ncn.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3249_zps1oahdx7h.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3250_zpshqn7y4sx.jpg
The fans are Nissan Altima fans that are trimmed to fit in an S13 and mount to an S13 KA/CA radiator. The fans could be used on an SR radiator as well, you would just need to trim around the upper radiator hose. The fan setup also includes wiring for an S13 chasis. Both fans have relays and fuses, one fan is controlled by a temperature switch, the other by a manual switch in the dash. All wiring connections/locations are marked on the components so installation should be a breeze. You don't have to be any sort of wiring guru to install it, just familiar with very basic wiring. This fan setup will not work with air conditioning, It would require additional trimming and some minor modification to the wiring. I can provide a switch to put in the dash, but I don't have the temperature switch for it. It simply uses the stock temperature switch that can be found in the lower radiator hose of any singlecam 240 that came with air conditioning. The mounting hardware for the fan shroud is all included as well, bolt-on, no e-fan zip-ties.
Radiator: $125
E-Fans: $80
BOTH: $190
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3248_zpskwt59ncn.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3249_zps1oahdx7h.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3250_zpshqn7y4sx.jpg