Can't get toe alignment right to go to shop for alignment

[Djinfinit]

I just did full front adjustable multilink on my car, and I cant get the toe alignment somewhat in line to drive it to a shop. The issue I'm having is when the driverside wheel is straight, the passenger wheel is pointed to far left, even with the tie rod end bottomed out. Can someone direct me how to fix this issue?

1995 240sx.

[brndck]

what did you change? a lot of aftermarket inner tie rods will be WAY longer than stock. some setups are designed for extended LCA, you will actually have to cut part of the threads off on the inner tie rod.

i run these PBM inner tie rods, and they're 20mm longer than stock. thats almost an inch.
https://store.partsshopmax.com/shop/silvia/MultilinkSteering/ITR.html

you would definitely have to trim these down if you were not running extended LCA like i am.

[andrewxxcarlson]

ya, were the new inner tie rods, longer than the old? Also if you put in a rack, i hope it was centered.