Mr.s14.5
08-20-2016, 03:05 PM
Sikky headers with custom y pipe that connects to a real apexi dual n1,
The headers are v band and from the y pipes thats are custom tig welded to the exhaust the entire piece is one part no flanges and resonator removed. asking $1000 for everything headers alone are woth that.
Sikky motor mount kit:
Basic Mount Kit Includes:
Aluminum Race Oil Pan
7 Quart High Capacity Design
6061 CNC Machined Flanges from 1/2″ Aluminum Retaining OEM like Structural Rigidity (not flimsy like other aftermarket pans)
Rear Flange at Bell Housing Allows Install of Factory Dust Shields
Baffle and Trap Doors to Prevent Oil Starvation
New OEM Oil Pan Gasket
Custom Oil Pickup Assembly
Remote mount filter Kit
-10 AN Fittings (4) and Stainless Braided Lines (2)
Remote Oil Filter Base
High Quality Oil Filter
All Fittings and Hardware
Engine Mounts & Transmission Mounts
CAD/CAM Designed CNC Machined Solid 6061 T-6 Aluminum Mounts
Custom Urethane Bushings with True Isolation
High Grade Hardware Kit
Proper Engine Placement and Axle Alignment
Lifetime Warranty on Engine Mounts
Trans Mount
CAD/CAM Designed
CNC Bent Steel Mount Bracket
Urethane Bushing
High Grade Hardware Kit
Designed for use with the T56 or T56 Magnum
Lifetime Warranty on Transmission Mount
Driveshaft
aluminum One Piece Driveshaft with High Strength 1310 U-joints
Designed for Use with the T56 or 4l60e Transmission
retail is $1750 not including shipping and not including the aluminum driveshaft asking $1350 I will throw the 240sx LSx Master Cylinder Conversion Kit for $150 kit is used but in very good conditions.
New unused wiring specialty harness for a 95 240sx pro series with converter box and all extra connectors and $600 new
wiring specialty coil pack harness- SOLD
oem gm corvette fuel filter and an adapters and 20 ft of tpf lines -$150 new
Sikky front sway bar new in the box -$275
Ls ecu with Hp tunners and all shit removed - $250
thats all for now
The headers are v band and from the y pipes thats are custom tig welded to the exhaust the entire piece is one part no flanges and resonator removed. asking $1000 for everything headers alone are woth that.
Sikky motor mount kit:
Basic Mount Kit Includes:
Aluminum Race Oil Pan
7 Quart High Capacity Design
6061 CNC Machined Flanges from 1/2″ Aluminum Retaining OEM like Structural Rigidity (not flimsy like other aftermarket pans)
Rear Flange at Bell Housing Allows Install of Factory Dust Shields
Baffle and Trap Doors to Prevent Oil Starvation
New OEM Oil Pan Gasket
Custom Oil Pickup Assembly
Remote mount filter Kit
-10 AN Fittings (4) and Stainless Braided Lines (2)
Remote Oil Filter Base
High Quality Oil Filter
All Fittings and Hardware
Engine Mounts & Transmission Mounts
CAD/CAM Designed CNC Machined Solid 6061 T-6 Aluminum Mounts
Custom Urethane Bushings with True Isolation
High Grade Hardware Kit
Proper Engine Placement and Axle Alignment
Lifetime Warranty on Engine Mounts
Trans Mount
CAD/CAM Designed
CNC Bent Steel Mount Bracket
Urethane Bushing
High Grade Hardware Kit
Designed for use with the T56 or T56 Magnum
Lifetime Warranty on Transmission Mount
Driveshaft
aluminum One Piece Driveshaft with High Strength 1310 U-joints
Designed for Use with the T56 or 4l60e Transmission
retail is $1750 not including shipping and not including the aluminum driveshaft asking $1350 I will throw the 240sx LSx Master Cylinder Conversion Kit for $150 kit is used but in very good conditions.
New unused wiring specialty harness for a 95 240sx pro series with converter box and all extra connectors and $600 new
wiring specialty coil pack harness- SOLD
oem gm corvette fuel filter and an adapters and 20 ft of tpf lines -$150 new
Sikky front sway bar new in the box -$275
Ls ecu with Hp tunners and all shit removed - $250
thats all for now