Any RHD guys having trouble with angle?

[ComicArtist]

So on my RHD converted s13, I'm having a hard time getting any more than stock angle out of my modded knuckles. I've relocated my rack forward an inch, extended the LCA's 35mm as well. And at full lock, right before overextending the rack, it barely has more angle than stock. Is it a problem with the RHD rack? The only other thing I can think is that perhaps when I extended the LCA's the metal could've warped a little bit and put the ball joint off center a little.

Just looking for input, I know there's RHD guys on here with angle mods.

[rawgarage]

You clearanced the wheel well?

[WPN-X7]

got any pics of it at lock, on the ground

what knuckles? extended tie rods to suit the LCA extension? wheel alignment specs?

[derek king]

There is no difference RHD to LHD as far as rack travel.

If you haven't centered the rack im willing to bed thats your problem.

Are you hitting tie rods on the LCA at full lock?

[OBEEWON]

I hate centering racks. I start thinking about cute girls and titties in the middle of counting turns, lose track and have to start over like 7 times.

[DS DockSide55]

I hate centering racks. I start thinking about cute girls and titties in the middle of counting turns, lose track and have to start over like 7 times.

Hahaha. For real though.

[///M3LVIN]

:keke::keke::keke::keke:

[RB25GUY]

There is no difference RHD to LHD as far as rack travel.

If you haven't centered the rack im willing to bed thats your problem.

Are you hitting tie rods on the LCA at full lock?

When you see serious answer, from not so serious man :rimshot:

[derek king]

When you see serious answer, from not so serious man :rimshot:
https://38.media.tumblr.com/42c1edb358f65399c6c4e0828c31fc77/tumblr_inline_nvpph1yjgC1syu64u_500.gif

[KiDyNomiTe]

What kind of knuckles?

[RB25GUY]

https://38.media.tumblr.com/42c1edb358f65399c6c4e0828c31fc77/tumblr_inline_nvpph1yjgC1syu64u_500.gif

first non sarcastic comment I have seen in awhile is all.....