s14 - Remote start cranks / won't turn over

[2.5T_/<ouki]

This is on an Auto to Manual conversion.

Hi all, installed a scytek G5.2w 2 way security system, keyless entry, and remote start on my 95' S14 base model. Everything is working great minus the remote starting function. The engine cranks and cranks but never turns over. I can start the car with the key just fine.

- I have rpm tach wire connected
- Tried with voltage start
- Tried with key in ignition and remote start
- Tried crank time even set at 4 seconds and just cranks

I have verified that the fuel pump does turn on/prime when I hit the remote start button.

Only thing I can think of why it's not starting would be that I don't have the hood pin switch connected so the brain thinks hood is open and as a safety feature won't start. I would think that the car wouldn't even crank if it sensed the hood open.

Anyone have any advice or where to start?
Thank you.

[2.5T_/<ouki]

Here is the manual in PDF format online: http://www.scytek.net/main/files/download/manual/galaxy/g5.pdf

Here is how I have my 6-pin remote start harness connected.

Red A: Main pwr Input A(+) // White (12v constant) Ignition switch Harness
Red B: Main pwr input B(+) // White (12v constant) Ignition switch harness
Brown: 2nd Ignition Output(+) // NOT CONNECTED
Orange: Acc Output(+) // White/Blue Ignition switch Harness
Yellow: Ignition input/output(+) // Black/Red Ignition switch Harness
Violet: Starter Output(+) // Black/Yellow Ignition switch Harness

[cotbu]

Did you wire anything to the ebrake switch?

Sent from my SM-N910T using Tapatalk

[2.5T_/<ouki]

Did you wire anything to the ebrake switch?

Sent from my SM-N910T using Tapatalk

Yes I wired the yellow wire from the 20 pin main harness to the Ebrake wire.

[2.5T_/<ouki]

Reading a bit more, looks like for the 240sx I must utilize BOTH starter wires. Currently only using one of the starter wires Violet (starter1) to Black/Yellow. I will try hooking up the brown (starter 2) to black/white and report back.

Appreciate all the help.

[cotbu]

Good luck, it's got to be something simple. It's cranking.

[2.5T_/<ouki]

Good luck, it's got to be something simple. It's cranking.

That was it. Connected the brown wire (starter 2) to black/white in IGN harness. Works like a charm!

[cotbu]

Nice![emoji41]

[d_nice]

thanks for this info guys,.

[2.5T_/<ouki]

thanks for this info guys,.

Not sure if anyone would want this info or not, but the small white wire harness side is used for aux (heater/ac). I connected this up to my 6 pin remote starter harness and now A/C or Heater is turned on when i remote start my car, granted its on when I leave the car.

[2.5T_/<ouki]

Anyone know if you can tie the trunk & hood pin to the same wire on the brain? Thanks.

[cotbu]

Lol yeah you can, but if you have another instant trigger pin on the brain, use that instead.

Sent from my SM-N910T using Tapatalk

[AllThingsGravy]

Can I pay you to do a 2way install? haha