PDA

View Full Version : CA CANADA - 1990 Silver-Green Pearl (FG0) Hatchback - 323whp SR20DET


derass
07-09-2016, 01:18 PM
Located near Toronto, Ontario, Canada.

Body
-1990 240SX Fastback
-Hardtop (No Sunroof: increased headroom, greater chassis rigidity and lower center of gravity ie. higher performance / better suited for track use)
-Original Paint (Rare Silver Green Pearl, only available in this year)
-Rust Free Exterior
-Extensive Rust-Proofing throughout its life
-Solid Framerails, Floors and Strut Towers
-Non-HICAS model
-250,000 km (155,000 mi)

Interior
-Complete and Overall Good Condition
-Grey Cloth Seats and Carpet
-Black Dash
-Manual Windows and Mirrors
-Nardi 350mm Deep-corn Steering Wheel
-NRG Short Hub and Quick Release
-A-Pillar Dual Gauge Pod
-Autometer Boost Gauge
-AEM Wideband
-JVC Headunit, Upgraded Speakers

Engine / Drivetrain
-S13 Blacktop SR20DET
-323 whp, tuned at RS Tuning
-Good Compression, 150psi across the board
-Castrol Syntec Engine Oil (Frequent Changes)
-Haltech PS1000, MAP, Electronic Boost Control
-HKS 555cc Injectors
-Walboro 255LPH In-Tank Fuel Pump, Z32 Filter
-GT2871R .64 A/R, HKS Actuator, DIF Stainless Lines, Restrictor and Clocking Plates
-New Turbo Gaskets and Hardware from Nissan (7 layer, lock plates etc.)
-Exedy Stage 2 Clutch, Machined Flywheel
-B&M Short Shifter
-Redline MT-90 Transmission Fluid (Changed Recently)
-KAAZ 2-Way Differential (Professionally Installed, Very Frequent Oil Changes)
-ARC Air Intake Box with K&N Filter
-ISIS FMIC (Identical to GReddy, excellent fitment)
-TiAL 50mm BOV
-Mishimoto Radiator, Dual Electric Fan
-FAL Adjustable Fan Controller
-Circuit Sport Thermal Intake Manifold Gasket
-Nismo Engine Mounts
-3” Turbo-back Straight Exhaust with Flex-pipe
-New Power Steering Hardlines from Nissan (No Leaks!)

Brakes / Suspension / Wheels / Tires
-HKS Hipermax Coilovers (Very smooth/comfortable ride)
or
-Stance GR+ Coilovers (More stiff, better suited for track use)
-Bings RUCAs
-Z32 Brakes Front, Rear and E-Brake
-30mm Aluminum
-Rebuilt Calipers
-Drilled and Slotted Rotors
-Braided Conversion Lines
-All new E-Brake parts (cables, shoes, hardware)
-17/16” Z32 Brake Master Cylinder
-ATE Type-200 Brake Fluid (Super Blue Replacement)
-Cusco Style Front Strut Bar
-Bushings, Ball Joints and Tie Rods Tight and in Good Condition
-17x9 +20 5Zigen FN01R-C
or
-17x9 +20 Falken Hanabi

$13,000 CAD
$10,000 USD

Please inquire with any questions you may have.

I also have some other parts that can be worked into a deal including:
-MA Motorsports Knuckles
-S13 +40mm Extended LCAs
-ERA-1 Offset Steering Rack Spacers
-Megan Tension Rods
-DMAX Adjustable Outer Tie-Rods
-GReddy Turbo Timer and Harness
-Spacro Sprint V Bucket Seat (FIA Approved)
-GReddy Style Rear Strut Bar

http://i.imgur.com/I0P4hAu.jpg?1
https://scontent-yyz1-1.xx.fbcdn.net/v/t1.0-9/13606758_10154329974439878_698707378227044796_n.jp g?oh=f056474a93e1467190a78979349d7aad&oe=5836D8B5
https://scontent-yyz1-1.xx.fbcdn.net/v/t1.0-9/13612262_10154329974584878_723590935569106191_n.jp g?oh=e8b184c41ee6fb844e5caa31a6f1b1da&oe=57EBC37F
http://i.imgur.com/ebhWd7Z.jpg?1

claaasssiiiccc21
07-13-2016, 11:37 PM
As cool as it is now, I feel so bad for the guy who had to drive that thing in the early 90s haha! love the color!