jaysgottaredtop
05-19-2016, 05:46 PM
SOLD
Pair of rare 3-piece PIAA Nakajima RF wheels.
16x8 +38
5x114.3
Not sure on hub bore, but much bigger than the 66mm S-chassis bore.
Both original center caps included.
Takes 90˚ valve stems on the barrel. One original stem included.
Takes M8x32 hardware, not included.
Faces, lips, and barrels are all in great shape. No bends, no curb rash, no pitting/oxidation. They could use a fresh polish, but that's about it.
I bought these to relip/rebarrel up to 17s, but I have toooooo many other wheels. I need to let these go and free up some garage space.
I already contacted VRWheels about relipping/rebarreling these. They don't currently have this wheel's bore & bolt hole dimensions in their database, but they could easily measure the faces and mill out new 17" stepped lips/barrels. All they need is a face sent to them for measuring.
$SOLD + shipping, obo
https://c2.staticflickr.com/8/7375/27119149405_26e8e43407_b.jpg
https://c2.staticflickr.com/8/7439/26513637124_1961503339_b.jpg
https://c2.staticflickr.com/8/7160/26845046310_08c882ae76_b.jpg
https://c2.staticflickr.com/8/7603/27085888736_98d7fb5327_b.jpg
https://c2.staticflickr.com/8/7372/26515325393_b66e0a3ca4_b.jpg
https://c2.staticflickr.com/8/7379/27050740761_245c4fc131_b.jpg
Here's an old PIAA ad. They were offered as 1-piece or 3-piece; 15", 16", 17", or 18"; x100 thru x??? PCDs; and a handful of different finishes. Mine are most similar to the wheel in the bottom right of the page:
http://www.jdmeuro.com/wp-content/uploads/2014/03/piaa_rt_800.jpg
Andddddd for shits and giggles, and to give a preview of the 17" step look, here are the PIAA faces resting between some Autostrada 17x6 barrels and 17x5 lips, measuring the wheel out to 17x11.5 +2:
https://c2.staticflickr.com/8/7326/26845083300_2a69d70635_b.jpg
https://c2.staticflickr.com/8/7536/26845095140_89c089f8c1_b.jpg
:2f2f:
Pair of rare 3-piece PIAA Nakajima RF wheels.
16x8 +38
5x114.3
Not sure on hub bore, but much bigger than the 66mm S-chassis bore.
Both original center caps included.
Takes 90˚ valve stems on the barrel. One original stem included.
Takes M8x32 hardware, not included.
Faces, lips, and barrels are all in great shape. No bends, no curb rash, no pitting/oxidation. They could use a fresh polish, but that's about it.
I bought these to relip/rebarrel up to 17s, but I have toooooo many other wheels. I need to let these go and free up some garage space.
I already contacted VRWheels about relipping/rebarreling these. They don't currently have this wheel's bore & bolt hole dimensions in their database, but they could easily measure the faces and mill out new 17" stepped lips/barrels. All they need is a face sent to them for measuring.
$SOLD + shipping, obo
https://c2.staticflickr.com/8/7375/27119149405_26e8e43407_b.jpg
https://c2.staticflickr.com/8/7439/26513637124_1961503339_b.jpg
https://c2.staticflickr.com/8/7160/26845046310_08c882ae76_b.jpg
https://c2.staticflickr.com/8/7603/27085888736_98d7fb5327_b.jpg
https://c2.staticflickr.com/8/7372/26515325393_b66e0a3ca4_b.jpg
https://c2.staticflickr.com/8/7379/27050740761_245c4fc131_b.jpg
Here's an old PIAA ad. They were offered as 1-piece or 3-piece; 15", 16", 17", or 18"; x100 thru x??? PCDs; and a handful of different finishes. Mine are most similar to the wheel in the bottom right of the page:
http://www.jdmeuro.com/wp-content/uploads/2014/03/piaa_rt_800.jpg
Andddddd for shits and giggles, and to give a preview of the 17" step look, here are the PIAA faces resting between some Autostrada 17x6 barrels and 17x5 lips, measuring the wheel out to 17x11.5 +2:
https://c2.staticflickr.com/8/7326/26845083300_2a69d70635_b.jpg
https://c2.staticflickr.com/8/7536/26845095140_89c089f8c1_b.jpg
:2f2f: