PDA

View Full Version : CA OEM JDM S13 BLACKTOP Air Conditioning (A/C) System


crozzover69
05-18-2016, 07:15 PM
For sale is this extensive set of JDM A/C parts for a Nissan Blacktop SR20DETengine.

The parts were taken off an extremely clean front clip with an immaculate engine.
Some electrical plugs (not Included) and wiring know-how are recommended to install this.

I never got to test this set up as it was beyond my mechanical skills to install
but have never even seen something like this go on sale here.

I am looking to get about $200 for all pieces. I figure someone would have
some use for these. Either to perform an exact right hand drive restoration or
to fabricate and sell some A/C parts for current SR owners.

*The lines look short because in JDM cars they run on the left side of the engine.
Because the steering column is on the right side, these are placed on the left.
When I was removing these off the donor car it clearly looked like they would not
interfere whatsoever with our left-hand drive steering columns.

Notes:

Sold as a complete kit only. No parting.
Only for local SoCal pick up.
No holding or payment plan options.
First person with best offer takes it.


PM me here and please leave your Phone Number for quick TXT response.
Again the first person that comes to pick it up gets it, higher offers also
have preference. Onto the pics...

https://farm8.staticflickr.com/7739/27008010542_c524a13288_b.jpg

https://farm8.staticflickr.com/7616/26498419183_f2f5c616ce_b.jpg

https://farm8.staticflickr.com/7036/26496772834_4e95f35201_b.jpg

https://farm8.staticflickr.com/7134/27008011062_4f24e6db95_b.jpg

https://farm8.staticflickr.com/7673/26496773084_0936935772_b.jpg

https://farm8.staticflickr.com/7535/26496773284_f729bd9c50_b.jpg

https://farm8.staticflickr.com/7046/27008011312_a64a22ff38_b.jpg

https://farm8.staticflickr.com/7252/26496773524_e6a93f9d46_b.jpg

roninwon
05-18-2016, 09:17 PM
I need those bolts

Tyler_240
05-19-2016, 04:05 AM
Good luck with sale. Good Price.

I recently got a\c working in my SR and spent at least $500.00+ for custom lines and the SR A\C Compressor with bracket.

From the pictures, all you would need is the belt, dryer, and freon.

kikcaffine
05-19-2016, 04:43 PM
Good luck with sale. Good Price.

I recently got a\c working in my SR and spent at least $500.00+ for custom lines and the SR A\C Compressor with bracket.

From the pictures, all you would need is the belt, dryer, and freon.

How did you manage to pull that off???

Hoffman5982
05-19-2016, 08:39 PM
Good luck with sale. Good Price.

I recently got a\c working in my SR and spent at least $500.00+ for custom lines and the SR A\C Compressor with bracket.

From the pictures, all you would need is the belt, dryer, and freon.

That's ridiculous. CodyAce brackets are 100 bucks and are all you need

crozzover69
05-19-2016, 11:14 PM
Good luck with sale. Good Price.

I recently got a\c working in my SR and spent at least $500.00+ for custom lines and the SR A\C Compressor with bracket.

From the pictures, all you would need is the belt, dryer, and freon.

Nice! Thank You.

Yeah if it doesn't sale I don't mind keeping it. This is just a project I know I
can perform but it would take me a good minute to finish since I don't have
many of the tools in my new place to get it going.

The dryer is actually fitted to the condenser but you could always get a separate
one and actually fit it where it is suppose to go (right of the Rad Fan),
this would involve more custom lines though.

As it is the lines fit everything perfectly and one would need to simply have custom
lines go from the left firewall to the right firewall where USDM AC ports are. JDM
AC ports are on the left so that's the only tricky part in this set up.

Below is an Image of the JDM Diagram

http://s1.megazip.me/M/db1/db18d06146dc09926830aa88640d027e.png

Tyler_240
05-20-2016, 06:18 AM
That's ridiculous. CodyAce brackets are 100 bucks and are all you need

CodyAce Conversion requires the factory SR a\c bracket to adapt a dohc compressor, which I did not have. I had to buy the bracket and hardware, which I happened to find a blacktop compressor and hardware as a package.

free bump. glws

crozzover69
06-01-2016, 11:33 PM
BUMP. Price Update. $200.00 firm for everything after researching a bit more.

Michaelg497
11-11-2016, 05:16 PM
still available?