Charlies New S13 - Ground up build

[Charlie_91]

Hi guys,

Thought I'd show you what ive been working on lately. Some of you might remember my old car. Ended up parting that for personal reasons and because I wasnt really stoked on it.

https://farm9.staticflickr.com/8837/17924341285_d6d1159f62_b.jpg

https://farm8.staticflickr.com/7734/17921286822_4792a0a55b_b.jpg

https://farm8.staticflickr.com/7685/17303848403_d411059530_b.jpg

Ended up trying to put together a street car. Chose a Jzx110 as a base which was pretty cool. Did a bunch of steering mods etc and eventually a turbo upgrade. Super cool car in the end but it got me wanting something I wasnt scared to ruin when i wanted to start pushing my driving.

https://farm2.staticflickr.com/1682/24883035069_9064cf2614_b.jpg

https://farm2.staticflickr.com/1648/25157524241_cf239e6b1b_b.jpg

https://farm2.staticflickr.com/1596/24955101340_5d1d071b70_b.jpg

Sold that to a guy who wanted a cool street car and wasn't too phased with drifting. So that brings us to now.

Picked up a cheap s13 with a few good parts and a few good parts i could sell. There were some cons, shitty sunroof block off, some damage to the quarters, previous front end damage some fixed some not and rough tubs from previous damage/fix. Its not the cleanest shell, but for what i wanted it suited my needs and it all measured up fine.

Plans for now is to, strip it right down, new tubs, cut out rear guards, half cage, rewire and paint interior/engine bay. Ill be picking up parts where i can but this isnt gonna be a super fast build. Eventually it will be low, wide and kitted but pulled off a lot better then my previous car. Anyways heres some pics :)

In all its glory.
https://farm8.staticflickr.com/7030/26277462964_93aee35937_c.jpg

https://farm8.staticflickr.com/7412/26883219845_30a601390a_c.jpg

https://farm8.staticflickr.com/7657/26815610111_2e758cc0ea_c.jpg

https://farm8.staticflickr.com/7287/26610186890_4330de09e2_c.jpg

Pulled Motor and box
https://farm8.staticflickr.com/7679/26815612651_8efd8f2b38_b.jpg

Stripped interior and pulled sound deadening out
https://farm8.staticflickr.com/7596/26610189050_c74db83580_b.jpg

https://farm8.staticflickr.com/7076/26883223875_530a0be761_b.jpg

Cut out rear guards
https://farm8.staticflickr.com/7072/26815619191_47285f928c_b.jpg

Cut out front damaged tubs and made some replacements
https://farm8.staticflickr.com/7251/26789700812_23c0225a8e_b.jpg

https://farm8.staticflickr.com/7384/26277480714_cdc8e1da48_b.jpg

https://farm8.staticflickr.com/7432/26278732863_ac8bfcf070_b.jpg

https://farm8.staticflickr.com/7351/26789704582_f3771a4753_b.jpg

Will update when I can/have anything to update.

Thanks Guys !!

[status_ryan]

In4updates.

[rawgarage]

Already starting off dope

[eDmSiL80]

so glad your back into a coupe. Loved the blue coupe and your miata :coolugh:

Please do a JZed swaps!

[Charlie_91]

Still getting Internet sorted at my new place so until then there won't be much. Follow my Instagram if you're that interested haha. Charlie_h_91. Had a set back with the shell after uncovering a lot of rust in the roof but hopefully that's the end of bad things haha.

[tricky_ab]

I was pumped for your original build, as well as the JZX110. I can't wait to see what you have planned for this new car!

[Charlie_91]

Alright ! Internet is up and running. So over the past few weeks ive been doing bits and pieces where i can. Finished stitching the tubs in and shaved some holes i wasnt using off the fire wall and rad support just to clean it up a bit.

https://farm8.staticflickr.com/7001/26891761930_54a8684829_b.jpg

Started to wire wheel off the old sealant from the make shift sun roof block off and this is where it got shitty haha. Wire wheel dug in a bit in the corners so i kept it going to find this.

https://farm8.staticflickr.com/7798/27132942546_ef67939f95_b.jpg

https://farm8.staticflickr.com/7508/26560014234_7b83601d8d_b.jpg

So needless to say i was less then impressed lol. Started looking into solutions and ended up coming up with the plan to swap another roof onto it.

While I was still sorting that out, I made a power brace (dont mind the red it will be going) and started to crack on with wiring. Plan for that is to strip everything i don't need and to tuck the engine bay wires/clean the harness up, relocate fuse box and ignitor into the cabin and make up a small switch panel.

https://farm8.staticflickr.com/7460/26561619253_10654ffe74_b.jpg

https://farm8.staticflickr.com/7674/27097733131_51329ee622_b.jpg

https://farm8.staticflickr.com/7115/27132951326_f495faaa55_b.jpg

Today I went off to cut a roof off a car before it went to scrap. Couple small dents but overall in good condition. Will paint strip it back this week and then work out a plan to cut the current roof off and swap this one in.

https://farm8.staticflickr.com/7158/26891767780_56b7e7341c_b.jpg

Anyways until next time :)

https://farm8.staticflickr.com/7110/27132946686_4ce5062c85_b.jpg

[d_nice]

looking good man.

[s13zack]

freakin sweet bro

[Ronald_Mcdonald]

Excited for this build. I loved your last one, and I know you have some great taste, so this should be good.

[Mr.s14.5]

awesome build

[Bullitt_180sx]

I don't know if you meant it literally the way you said it, but don't cut the roof off and weld on a different roof. Just remove the skin and swap that. Here is some of the process when I did it on one of my hatches years and years ago.

http://www.tamparacing.com/forums/nissan-infiniti-tech/654215-s13-hatch-roof-skin-swap-few-pics.html

[drfftn]

I don't know if you meant it literally the way you said it, but don't cut the roof off and weld on a different roof. Just remove the skin and swap that. Here is some of the process when I did it on one of my hatches years and years ago.

http://www.tamparacing.com/forums/nissan-infiniti-tech/654215-s13-hatch-roof-skin-swap-few-pics.html


Dope! I'm the same boat as OP.

[Charlie_91]

I don't know if you meant it literally the way you said it, but don't cut the roof off and weld on a different roof. Just remove the skin and swap that. Here is some of the process when I did it on one of my hatches years and years ago.

http://www.tamparacing.com/forums/nissan-infiniti-tech/654215-s13-hatch-roof-skin-swap-few-pics.html

Thanks for the info man. I share a shed with two panel beaters so was just gonna let them do what they do haha.

[Charlie_91]

Update:

So few things happening. Making more progress on wiring and as you can see the pile is getting bigger.

https://c3.staticflickr.com/8/7110/26887481394_27dd3869d3_b.jpg

https://c3.staticflickr.com/8/7333/26887486154_b6568304bf_b.jpg

Stripped back donor roof to make sure there wasnt anything hiding underneath all the paint. Few little dents but ill take care of that before it goes on.

https://c2.staticflickr.com/8/7297/27424929441_f57e523847_b.jpg

Been making a few mounts and a block off for the tunnel. Previous owner cut a huge amount out of the tunnel where the shifter so i want to make it look a bit nicer.

https://c4.staticflickr.com/8/7067/27496775075_da782634c0_b.jpg

Radiator mounts and cooler mounted
https://c3.staticflickr.com/8/7502/27219818850_bee5d02e70_b.jpg

Last of all, started making ways on the cage. This car will only see a halfcage with some door bars.

https://c6.staticflickr.com/8/7419/27496778925_d384f98a2c_b.jpg

[fod]

such potentials! looking forward to some more mang

[Charlie_91]

Update:

Finally got a chance to pick the old roof off with the help of Michael. Will be able to finish the cage this week and weld it out before putting the new skin on.

https://c2.staticflickr.com/8/7335/27615287065_2e6bcfe507_b.jpg

Next up was mounting the new power steer pump. Ended up going with Holden Astra electric one. Main reasons for doing this is to clean up the bay.

https://c8.staticflickr.com/8/7298/27542180351_e80f0acf59_b.jpg

https://c5.staticflickr.com/8/7671/27515657972_eece3c0568_b.jpg

Will drill out the parcel shelf sometime this week which will make it easier to fill.

FInally to finish off the weekend, i picked up some bricks for cheap knowing that the rear on the passenger side one was melted. Plus side being all brackets etc were in tact.

https://c3.staticflickr.com/8/7245/27338220770_bebcdc5917_b.jpg

As you can see its pretty average. In postage one of the lenses broke due to poor packaging (was always gonna go clear covers) but the seller refunded me some money so all up these owe me $100. Picked up a broken brick headlight off a mate to use the back

https://c5.staticflickr.com/8/7321/27515663932_c7c7d9b0d5_b.jpg

Cut out the old melted stuff and then sectioned out the donor and worked on making it fit. Once glued in it looked pretty good.

https://c1.staticflickr.com/8/7337/27581469816_c758365ae1_b.jpg

More or less back together just need to paint the housings black :) Just need to finish it off with clear covers.

https://c2.staticflickr.com/8/7355/27005839553_a3fd739aa1_b.jpg

[rawgarage]

Prepare to see nothing

[Counteract]

Prepare to see nothing

+1. Biggest regret on my last S14.

Car looks like it's coming along well. I loved your MX5, PS13 and 110 so no doubt will have some fuzzy feelings about this one once you start adding your style.

[Charlie_91]

Oh I don't meant the chrome parts. I mean the whole headlight without the reflectors in it. Just to get rid of the red paint and clean it up a bit if you get what I mean haha

[Ronald_Mcdonald]

Isn't this strictly a track car?

Lack of lighting from bricks won't matter if the car never sees the street...

[Charlie_91]

It will see rego once done but street driving will be limited to wheel alignments/occasional meets.

Progress:

Halfcage is all finished up. Opted to keep this pretty simple but still effective.

https://c2.staticflickr.com/8/7383/27764850065_08000150a3_b.jpg

https://c7.staticflickr.com/8/7369/27152637534_1ae6557bd3_b.jpg

Roof has been unpicked off the donor cut. What a gay job that is haha. Just need to clean up all the surfaces this week and then its ready to be put on for good.

https://c3.staticflickr.com/8/7298/27664197602_d7f2442c6b_b.jpg

Also received a bunch of suspension parts this week. I decided with Gktech, main point being value for money. With the USD and Yen being the way it is a lot of other brands just put it into the too expensive category. Did a fair bit of research on these and they seem to check out so we'll soon see.

- Bent castor arms
- Bent toe arms
- Camber Arms
- Traction arms
- Tie rod ends
- Maxima tie rods
- Subframe risers
- Extended steering shaft spacer to suit relocated rack.
- 326 power Coilovers

https://c6.staticflickr.com/8/7546/27690471541_9a105ec9ce_b.jpg

Knuckle setup should be here within a couple of weeks then thats pretty much all the parts i need to get it rolling. Also wheels come in next week. Pretty keen to get the shitbox painted inside and rolling on all the fancy stuff.

[Ronald_Mcdonald]

I seriously can't wait to see this done.

[rawgarage]

Coils look damn good

[Malik]

good luck.. this should be good

[da_crew10]

Aero plans? Will this be as low as the blue one? lol

Car is looking awesome thus far!

[S-Nation S13]

in for updates OMG i remember that blue car !!

[NJs13_1993]

Sub'd. Can't wait to see how this turns out

[tricky_ab]

Man you've been putting in work. Love the choices in parts so far as well!

[I<3BEWBZ]

Loved the green/blue s13, this one is looking crazy already! Nice work

[Charlie_91]

Wheels arrived. Was unsure how they would look but came up pretty good. Heres a bunch of pics.
Specs: 18x9.5+0 and 18x11-18

https://c5.staticflickr.com/8/7538/27750873452_d515d2d0f0_b.jpg

Fronts
https://c2.staticflickr.com/8/7414/27852340425_974b8e4902_b.jpg
https://c3.staticflickr.com/8/7678/27574420810_4bd5e6472d_b.jpg

Rears
https://c1.staticflickr.com/8/7294/27239984344_b4f0a25df9_b.jpg[
https://c6.staticflickr.com/8/7457/27852364365_fb8cfb037a_b.jpg
https://c8.staticflickr.com/8/7395/27240227303_195c3a9d3b_b.jpg

[chank]

those wheels are schweet!!

[VenomKillz]

Love the fact you're going to use 326 Power coilovers. +1

[supersayianjim]

nice op. I had a roof issue(my hood smacked my roof) good to know all you have to do is replace the skin.

[scottie]

Them wheels!! I can already picture the stance. Keep the updates coming.

[jsu1012]

Oh man this is going to be good! T7r 2 piece was a great choice.

[Street_raiders]

Are you staying 2 tone? Trying to picture how this will look with the T7rs, very nice wheels

[Charlie_91]

Hey guys,

Long time no update. Ive been busy doing a lot of little stuff to it. Continued on the wiring. Front and rear looms all done just concentrating on the engine loom atm but shouldnt be too far off. Unfortunately no pics but it looks pretty with the sleeving :')

Also decided to run the loom through behind the motor so i shave the last hole on the firewall. Its not fantastic but its pretty good so should be good once painted.
https://c3.staticflickr.com/9/8016/29251480506_5de7994398_b.jpg

Bought some new engine mounts mainly because i needed to sit the motor in to work out exhaust manifold.
https://c2.staticflickr.com/9/8413/28664554113_70acde3f1f_b.jpg

On the topic of exhaust manifold, this is what Terry and I came up with. Its like a forward low mount type thing. Because my ps pump is in the boot we decided to do something different. Came up really cool and looks pretty badass in the bay so happy with that. Just need to do the gate hole etc and its done :)
https://c3.staticflickr.com/9/8214/29176908482_045d171e42_b.jpg

https://c6.staticflickr.com/9/8122/29285269685_73b89c45e6_b.jpg

Also finalising the suspension. Subframes and stuff are off getting powder coated atm. My heatmaker steering setup came in as well. Then just decided to clean up my LCA's and Rear knuckles as these will be staying stock for now.
https://c4.staticflickr.com/9/8462/28664557483_a5937e70d2_b.jpg

https://c3.staticflickr.com/9/8151/29251422706_bfdfd714a0_b.jpg

Finally the ecu and patch loom. Nothing fancy or new but should do the trick.
https://c5.staticflickr.com/9/8389/29251419996_d66e0e2735_b.jpg

Other then that, the roof has been welded back on so will start to finalise everything and start paint prep so i can get it paint and rolling. Exciting times.

[Charlie_91]

Update:

So finally got all the pieces to put my suspension together.
Front Setup consists of:
- 326 coilovers
- heatmaker knuckle/lca combo
- Gktech v3 castor arms
- Relocated steering rack
- PBM steering rack bushes
- Solid steering shaft spacer

Rear:
- 326 Coilovers
- Gktech v3 camber, toe and traction arms
- Solid subrame bushes
- Reinforced Subframe

Heres some pics :)
https://c7.staticflickr.com/6/5098/29887943102_49dbea34a0_b.jpg

https://c8.staticflickr.com/6/5474/29918494751_af2b53b996_b.jpg

https://c4.staticflickr.com/9/8603/29374990923_346b0a4932_b.jpg

https://c4.staticflickr.com/9/8452/29374936443_e250ca5d26_b.jpg

Also test fitted the motor and manfiold on. Excited for this !
https://c2.staticflickr.com/6/5782/30001430465_3b0e68b814_b.jpg

https://c6.staticflickr.com/9/8129/29918488461_a7d4b80c78_b.jpg

[tricky_ab]

This car is going to be too cool!!! Love the custom manifold by the way.

[DJTTon]

Watch him just quit mid build. Not like we havent seen that already...

;p

[Charlie_91]

Watch him just quit mid build. Not like we havent seen that already...

;p

lol I haven't quit mid build. I've sold cars once they were finished and I wanted to do something different but that's about it...

[tb13]

Damn, this thing is coming along nicely. Will be following this build for sure!

[RB25GUY]

Tubs and GReddy TD06-20G <3

fixed that for you


this beast is already looking promising!

[tuzzio]

That manifold is awesome.

[Charlie_91]

Thought id update because ive been doing a lot of shit haha. So to start off with. made some brackets, kept going with wiring and looped heater lines.

https://c6.staticflickr.com/6/5821/31192173205_eb7aafe8d5_b.jpg

https://c3.staticflickr.com/6/5489/31156472546_5c2df92365_b.jpg

https://c7.staticflickr.com/6/5679/31156475206_5004fa7e97_b.jpg

Next up I installed cams with the help of a friend and got the cooler pipes/header tank setup fabbed up.

https://c5.staticflickr.com/6/5605/31156481196_ce953caff7_b.jpg

https://c8.staticflickr.com/6/5596/30385272063_4dbf43b061_b.jpg

Stripped it down to a complete bare shell and painted the insides Audi Nardo Grey.

https://c5.staticflickr.com/6/5770/30371245604_775ca8c678_b.jpg

Kit Came in :)
https://c8.staticflickr.com/6/5446/31078155071_833104d1c1_b.jpg

Overs came in. Fluked the fitment on this. Was kinda worried they wouldnt fit the wheels but it just made it.
https://c1.staticflickr.com/6/5322/31156460856_48db542508_b.jpg

Had to mock it up together !
https://c1.staticflickr.com/6/5724/30825130000_83d970fedf_b.jpg

https://c7.staticflickr.com/6/5739/30371234774_05a540a790_b.jpg

Time to reassemble and get it running :)

[octanejockey]

That low mount turbo looks sweet! Have you figured out where you're going to mount the scavenge pump yet?

[Charlie_91]

That low mount turbo looks sweet! Have you figured out where you're going to mount the scavenge pump yet?

Doesn't look like it but the oil drain flows down still so no need for scavenge pump :)

[offthewall]

Yeah man! I like it.

p.s:
I want to steal your wheels.

[tricky_ab]

http://i.imgur.com/BF1ybti.gif

Car Modify Wonder! Man, this is one of my current favorite builds!

[Standard]

Hell yeah! Nice progress!

[Kalem_s13]

http://uploads.tapatalk-cdn.com/20161126/bcfb505d83939182ec742d7532e53e5c.jpg

Looking good man, what size are these over fenders? Keen to seeing some more quality work!

[octanejockey]

Doesn't look like it but the oil drain flows down still so no need for scavenge pump :)

Right on, even better! You've got a great looking build so far, I'm so jealous of your shaved / tubbed bay... It's a long way off on my to-do list, lol.

[joshchewuhh]

you're my hero!

[Ronald_Mcdonald]

Damn, that's so good.

[Habibi240]

Looking amazing . Subd

[1988montecarloss]

gonna take a lot to top the last s13 but i think this has it covered for sure, are those origin type 3 rear overfenders?

[Malik]

im excited for this

[TheRealSy90]

I cant get over the fact that you weren't happy with the old green/blue s13, cause that car has been my top 3 silvias next to TJ's old black silvia, and Streeter's white silvia.


However this new car is really coming together and looks amazing. Any chance I could purchase one of those heater loop line setups? I don't like the one I made very much.

[gbaby2089]

This is way good thus far.

[supersayianjim]

It will see rego once done but street driving will be limited to wheel alignments/occasional meets.

Progress:

Halfcage is all finished up. Opted to keep this pretty simple but still effective.

https://c2.staticflickr.com/8/7383/27764850065_08000150a3_b.jpg

https://c7.staticflickr.com/8/7369/27152637534_1ae6557bd3_b.jpg

Roof has been unpicked off the donor cut. What a gay job that is haha. Just need to clean up all the surfaces this week and then its ready to be put on for good.

https://c3.staticflickr.com/8/7298/27664197602_d7f2442c6b_b.jpg

Also received a bunch of suspension parts this week. I decided with Gktech, main point being value for money. With the USD and Yen being the way it is a lot of other brands just put it into the too expensive category. Did a fair bit of research on these and they seem to check out so we'll soon see.

- Bent castor arms
- Bent toe arms
- Camber Arms
- Traction arms
- Tie rod ends
- Maxima tie rods
- Subframe risers
- Extended steering shaft spacer to suit relocated rack.
- 326 power Coilovers

https://c6.staticflickr.com/8/7546/27690471541_9a105ec9ce_b.jpg

Knuckle setup should be here within a couple of weeks then thats pretty much all the parts i need to get it rolling. Also wheels come in next week. Pretty keen to get the shitbox painted inside and rolling on all the fancy stuff.



hey, imma need you to show me step by step how you did this roof swap. I need to do the exact same thing and I have a donor roof also so a step by step would help...

[Malik]

more updates on this please

[Charlie_91]

Sup guys,

A lot has happened lately. Lots of small little stuff but finally almost done. Exhaust is all done. Wiring is 99% complete. Defis arrived and are in and the car is now painted. Put windows in today and made the car run :) Here's some photos that i have.

https://c1.staticflickr.com/1/678/31704218844_a301886a47_b.jpg

https://c1.staticflickr.com/1/382/32548097205_690d324ca7_b.jpg

https://c1.staticflickr.com/1/604/31704222664_c3bef3a489_b.jpg

https://c1.staticflickr.com/1/596/32168650070_01199f21cc_b.jpg

Will update more when its all done.

[Reece]

Holy shit

o:

[jsu1012]

This is insane buddy. great work.

[scottie]

I was on the fence at first glance of the kit. Safe to say this is in the group of my favorite S13 coupes. Fan-freakin-tastic!!

[hrdprkin180]

This looks dope! Great work

[pacotaco345]

Lord help me this car is too cool

[tricky_ab]

Jesus this car is simply AMAZING!

[Malik]

im stoked....

[ehhhregartless]

https://media.giphy.com/media/fjallj45M1aoM/giphy.gif

[Ronald_Mcdonald]

I knew it was going to be good, but damn...

[Flip2Flow]

Back at it again!

[DJTTon]

AWWHMA GAWDDD1!!11 This is some serious business, you got an insta???

[I<3BEWBZ]

holy smokes

[Charlie_91]

Hey dudes,

Finally fixed all the oil leaks so i drove it outside and threw some coverless bricks in there.

https://c1.staticflickr.com/1/641/32522370281_608724c926_b.jpg

https://c1.staticflickr.com/1/692/32265584040_271f1f4f2d_b.jpg

https://c1.staticflickr.com/1/709/32522372731_964acd564f_b.jpg

https://c1.staticflickr.com/1/452/32491849622_05bdbef6b5_b.jpg

[DJTTon]

vids or its a lie

[David616]

Car looks amazing!!

Not to take away from yours, but what's up with the other fleet of cars thats in the garage?

[Malik]

thats pretty rad... id like to see some clear covers on those, just to finish this damn thing, but wow.

[lgsr20swap]

What side skirts r those. They are dope!!


Sent from my iPhone using Tapatalk

[ehhhregartless]

Not to take away from yours, but what's up with the other fleet of cars thats in the garage?

FR WTH M8 :eek:

[Malik]

What side skirts r those. They are dope!!



the whole kit is car modify wonder

[Malik]

suscribed for more updates, this is my favorite car on zilvia right now.

[Charlie_91]

Sup guys,

Car got completed, just in time for Halfway Hangs (Car/drifting/getting drunk event). Made 310rwhp on 18psi pump fuel. Ended up working pretty well, few issues with the electric power steering but on the way to diagnosing that. Power feels good, suspension felt good and temps behaved them selves :)

Heres a photo dump
(need to remember to close both bonnet pins :/)
https://c1.staticflickr.com/4/3744/32896314760_4364a006e4_b.jpg

https://c1.staticflickr.com/1/754/32464629763_c0c98c69b8_b.jpg

https://c1.staticflickr.com/3/2948/33279382995_fcc52b03e3_b.jpg

https://c1.staticflickr.com/1/729/32464630183_5b2856687d_b.jpg

https://c1.staticflickr.com/3/2842/32464630503_a1a77243ff_b.jpg

https://c1.staticflickr.com/4/3953/32436259384_fa8a7d2a10_b.jpg

[Malik]

this is too fucking good.

https://media.giphy.com/media/gNLMoeRo5vnt6/giphy.gif

[MistyBlueS13]

This car is amazing. Loved your old car too haha. Keep up the good work!

[DJTTon]

Electric power steering?! Whered you source the stuff for that? How are you tuning it?

[Malik]

any more updates?

[[email protected]]

slight hope on zilvia has been restored, good job sir.

[WPN-X7]

any more updates?

his parting it already as thats what charlie does lol

[Malik]

oh god, please no.

can we get verification on it

I went and searched for this thread just so I could get an update.

[tricky_ab]

oh god, please no.

can we get verification on it

I went and searched for this thread just so I could get an update.

This build is done, and the car has been parted out.

Shame as it looked dope as hell...

[Malik]

awww what the fuck... ok

[WPN-X7]

This build is done, and the car has been parted out.

Shame as it looked dope as hell...

give it 6 months and he'll have the itch to build something retarded again haha

[Charlie_91]

Yeah build is done. Had some other stuff I needed to put money into and the drive to keep drifting just wasn't there to justify it. Tried to sell as a whole but as with anything like this, parting is the easier way.

Was a good build and came out how I wanted and drove the way I wanted so not all bad !
Will post up some final pics later today

[Malik]

Ok cool, well it was nice while it lasted.

this car was the shit.

[Charlie_91]

https://c1.staticflickr.com/5/4188/33912741820_fb3de3fa14_b.jpg

https://c1.staticflickr.com/3/2890/33455119904_500e92ea7b_b.jpg

https://c1.staticflickr.com/3/2859/34296704005_4a8afe399e_b.jpg

https://c1.staticflickr.com/3/2892/34139209682_7df9ecf21f_b.jpg

https://c1.staticflickr.com/5/4156/34296738105_dd54092219_b.jpg

https://c1.staticflickr.com/5/4185/33486575623_9a91e91435_b.jpg

https://c1.staticflickr.com/3/2817/34139231862_c0473cd94d_b.jpg

https://c1.staticflickr.com/3/2826/34296755345_8069dfb030_b.jpg

https://c1.staticflickr.com/3/2805/33455108794_29930136c4_b.jpg

[Charlie_91]

give it 6 months and he'll have the itch to build something retarded again haha

$50 says i dont

[Malik]

wow im speechless... how far along are you with the part out.

[scottie]

$50 says i dont

Are you going with a simple JZX build? Or is this "getting out of the car game altogether" sale?

[tricky_ab]

Are you going with a simple JZX build? Or is this "getting out of the car game altogether" sale?

He just built a "simple" JZX110 before this one... no?

[lgsr20swap]

Pm sent on part out


Sent from my iPhone using Tapatalk

[d_nice]

Very sexy man.

[tuzzio]

That PS relocation is fantastic.

[onehundredoctane]

Beginning to end :(

First time I've stumbled upon this thread, hate it got parted

[MattDuqueBMX]

Lmfao rip to another nice car. Part outs for days/months//years....

[d_nice]

[QUOTE=Charlie_91;6190985]https://c1.staticflickr.com/5/4188/33912741820_fb3de3fa14_b.jpg

Hey Charlie what did you use for your roof by chance?

[Gr1mey_Norm]

Did you make this bracket or did you find it somewhere? I have the same pump and this bracket would come in handy!


https://uploads.tapatalk-cdn.com/20181114/d189227a7a497bb60b43055eff108ec9.jpg


Sent from my iPad using Tapatalk